Repairing, Scrubbing and Painting work for chimney at Kasturba Hospital

Repairing, Scrubbing and Painting work for chimney at Kasturba Hospital.

Providing & fixing in position single leaf flush door of required size for internal doors of residential units, shutters made of 45mm thickmarine grade block board core with 25mm x 45mm T.W. lippingpatti, 1mm thick approved decorative laminates finish on both faces ofshutter, including providing & fixing T.W. frame of 60mm x 150mm size,coating all the exposed surfaces of wood with 2 coats of flat enamel paint of approved shade & make over one coat of approved synthetic primer, coating all the surfaces of wood in contact withmasonary with Tar (Black Japan), preparing the surfaces, providing and fixing brass chrome finished or S.S. fittings and fastenings etc complete as per detailed drawing no. WD-26 & as directed by the Engineer in charge.

Providing anti termite treatment conforming to IS- 6313 (part-III) to the wooden frames of doors / windows of the Existing building by drilling the 3 mm dia. holes at 150mm c/c and at the junction of wood work and masonry work to downward angle of 45 degree and injecting 500 ml per hole or until refusal with oil / kerosene based chloropyrifos EC 20 emulsion or equivalent of 1% concentrate, sealing the holes by filling the putty etc complete as directed by Engineer-In-Charge with 2 years guaranty

400 Amp. 415V TP Switchfuse unit with CRCA sheet steel powder coated enclosure with HRC fuses & switch links and padlockable arrangement.

100/125 Amp. 415V TPN Switchfuse unit with CRCA sheet steel powder coated enclosure with HRC fuses & switch links.

400A TPN with tinned copper bars of size 50 x 10 mm.

Cubical Panel (Fabricated from CRCA sheet steel SWG 16, powder coated, rust protected enclosure, IP 52)

600 X 600 X 3.15 mm Copper Plate, 3000mm dip with suitable size cu strip earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25X3 cu strip / 2X8SWG Cu.wire up to chamber, disconnecting links with 600 x 600 mm (clear) RCC chamber & 3mm thick heavy duty CI chequered plate cover with hinge. Bentonite shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

Marine Ply Service cupboard made from 12 mm thick Marine Ply planks and 150/200 mm. Wide panels(plank) fixed on 25 X 40 mm. size (Marine Ply batten) and 20 mm. thickness for back plank using heavy duty hinges of stainless steel & locking arrangements etc. but front half cover in G.I.wire mesh of 20/22 SWG. Entire Marine Ply. Cupboard shall be dully varnished as per approved manner

Supply and fixing 20 mm thick Marine Ply Plank

Please Enable Macros to View BoQ information