REPAIR AND MAINT OF INT WIRING LIGHT FITTINGS AND FIXTURES AT OTM ACCN ASC (SOUTH) TB-II TB-III TRG WING AREA AND OTHER CONNECTED AREA UNDER GE (CENTRAL) BANGALORE

Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete all as specified and directed.

M&L for Surface Conduit Point wiring for One light point controlled by one 5 Amps switch one way with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic conduit on surface conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed Note:Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment.

All as per item No 2 above but for One 3 pin socket point 5 Amp on independent board complete all as specified and directed

All as per item No 2 above but for One 3 pin socket point 5 Amp on same board with other switches complete all as specified and directed.

All as per item No. 2 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

M&L for Point Wiring for One light point controlled by one 5 Amps switch one way with 1.5 Sqmm (Nominal Area) PVC insulated unsheathed 1100 Volts Grade Stranded Copper Conductor Cable (Red Colour Cable for Phase and Black Colour Cable for Neutral), laid in and including PVC Casing and Capping with Accessories (size of Casing and Capping as required at Site) including 1.50 Sqmm PVC ins-ulated Stranded Copper Conductor Cable (Green Colour) as Earth Continuity Conductor and connected to Common Earth Dolly or as directed and MS terminal box with 3mm thick masonite laminated sheet top cover fixed on Wall for one light and fan point controlled by one switch complete all as specified and as directed Note : Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment.

All as per item No 6 above but for One 3 pin socket point 5 Amp on independent board complete all as specified and directed

All as per item No 6 above but for One 3 pin socket point 5 Amp on same board with other switches complete all as specified and directed.

All as per item No. 6 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for 3 pin 15 A socket outlet on independent board complete all as specified and directed.

M&L for Concealed Conduit Point wiring for One light /Fan point controlled by one modular switch 6 Amps one way with 1.5 sqmm single core PVC insulated FRLS unsheathed cable 1100 volts grade with multistranded copper conductor conforming to IS-694 1990 with ISI marked (for phase ,neutral and earth) drawn in and including non metalic rigid PVC conduit medium gradewith ISI mark of minimum 20mm dia and all surface conduit accessories including cutting / chases in wall /ceiling /fixed to roof /truss/columns etc and including factory made branded make embossed galavanised steel pressed terminal boxes alongwith size modular cover plates with frames fixing modular switches, sockets, regulators etc.of suitable size modules and earth wire to be connected to common earth dolly complete all as specified and directed. Note:Location of light points, socket points and light fittings may be decided by Engr-in-charge as per site/user requirment.