REPAIR, REPLACEMENT OF JOINERY, STEEL WINDOW, VENTILATORS, PVC DOORS GLASS PANES WIRE MESH ETC IN TYPE-I, TYPE-II and TYPE-III QUARTERS OF DRDO and DGQA POOL AT RAKSHA VIHAR COLONY, UNDER GE (I) R and D KANPUR.

Amount

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed.

Taking down old window / ventilators with frame, any type and any description, including guard bars not exc 1.5 sqm each , complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqm but n exc 4 sqm in each complete all as specified & directed.

Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each and refixing in the same opening complete all as specified & directed.

M&L for mild steel work as in door chowkhat of angle iron including necessary cutting and welding conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

S&F Second class hard wood Palin, solid, straight as in chowk at and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick Flush shutters, soild core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.

S&F 19mm thick Flush shutters, solid core construction, with block board ISI marked confirming to IS 1656-2004 with latest amendments & pasted 0.80mm thick mica sheet adhesive used Phenol and pressed by hot pressed on both face of approved shade & colour of make of mica : Bell industries/formica as approved by GE complete all as specified and directed by Engr-in-charge.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

S&F 50 mm size mild steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F 75mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F 125mm long extruded aluminium alloy handle complete all as specified & directed.

S&F 150mm long Mild steel handle, oval type, stove enamelled black complete all as specified & directed.

S&F 75mm long Anodised Aluminium tower bolt complete all as specified & directed.

S&F 200mm long Anodised Aluminium tower bolt complete all as specified & directed.

S&F 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified & directed.

S&F 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repair 50 mm size mild steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F in repair butt hinges medium weight cold rolled mild steel 100mm long fixing with srews or weld to steel/PVC/wooden frame work complete all as specified and directed.

S&F in repair 150mm long Mild steel handle, oval type, stove enamelled black complete all as specified & directed.

S&F in repair 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified & directed.

S&F In repair 300mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F hasp & staple, aluminium 100mm size complete all as specified and directed.

S&F magic eye (door sight viewer) for doors complete all as specified and directed.

M/L for small fitting such as door and window stops article n exc 200 cu cm each in 2nd class hard wood complete all as specified & directed.

M&L mild steel work as in holdfasts, knee piece and similar small article confiraming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

S&F steel window/vent with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and dirceted.

S&F steel window/vent with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and dirceted.

M&L for Steel ventilators, top openable shutters, with glazing bars complete all as specified and directed.

M&L Providing, cement concrete type B0, 1:2:4 (12.5mm graded stone aggregate) as in coping, holdfast area etc complete all as specified and as directed.

S&F for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes,MS flats, framed guard bars & similar work etc complete conforming to Fe 290 .Gde-E-165.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick Complete all as specified & directed.

S&F 3mm thick figured glass pinheaded type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.63 mm nominal dia and average width of aperture 1.40 mm complete all as specified and directed .

M&L for Preparation of new wood surface of any description over 10 CM width or girth and applying two caots of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.

Taking down cement plaster of any description,thickness including racking out joints hacking for key scrubbing down with water all as specified

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for rendering 15 mm thick in two layers (10+5) on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) mixed with water proofing compound @ 2% by weight of cement by using scaffolding upto the 15m height surface finished even and smooth without using extra cement, including taking down old plaster of any type complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of ceiling surfaces of roof ,chazza,beam etc in cement mortar (1:4) including finishing the surface even and smooth complete all as specified & directed .

M&L for preparation of new palstered surface of ceiling and applying three coats of white wash on newly plastered surface of ceiling, including preparation complete all as specified and directed .

M&L applying two coats of oil bound distemper on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all as specified and directed.

M&L applying two coats of cement base paint on walls surface over a coat of primer (as per manufacturer instructions) on wall surfaces including necessary preparation of wall surfaces complete all as specified and directed.

M&L for three coats of white wash on New plastered of wall surfaces including preparation of surfaces complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 incl taking down old tiles complete all as specified & directed.

M & L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia and average width of aperture 1.40 mm complete all as specified and directed .

m/s sahu enterprises

P.N. BROTHER