MISC REPAIRS TO RCC JALLI, DRAINS, FOOT PATH COMPOUND WALL IN MOHAN NAGAR AND PRAKASH NAGAR UNDER

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified & directed.

M & L for Brick work with flyash bricks old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 etc complete all as specified & directed.

M & L for brick work with old size bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 but except bricks complete all as specified & directed.

M & L Brick work with sub class ‘B’ Brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings, etc. n exc 15cm thickness (below or above ground level) as in surface channel, coping etc. and removing debris and rubbish out of the premises complete all as specified & directed.

M & L for plain cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in surface channels and drains, etc.

Extra for forming fair finished of drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped

M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filing and mass concrete complete all as specified & directed.

M & L plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping kneelers, apex stones, bed plates, kerbs, etc. complete all as specified and as directed.

M & L for Precast Reinforced Cement Concete 1:2:4 (Nominal Mix) Type B-1 using 20 mm graded stone aggregate as in cover slabs (for man holes, etc.) set in Cement Mortar (1:4) including necessary form, mould work, etc. complete all as specified and as directed.

M & L Precast Cement Concete louvres and jalli 1:3:6 (Nominal Mix) type B-0 using 12.5mm graded stone aggregate, set in Cement Mortar (1:4), 25 mm thick, including all moulding but excluding frame complete all as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even & smooth complete all as specified and directed.

M & L for Preparation of old painted plastered surfaces and applying one coat synthetic enamel paint complete all as specified and as directed.

M & L for Preparation of new or previously untreated plastered surfaces of any description over 10 cm girth or width, not other wise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing debris and rubbish out of the premises complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exceeding 200 mm thick rough finished complete all as specified and directed.

M & L Mild steel TMT bars (Fe 500D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Sl Item No. 20 above but 5 mm dia and over upto and incl 10 mm dia in stirrups, spaces, and binders complete all as specified and as directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M & L for 15 mm thick screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in sub base to receive tiles.

M & L for granite work (of any type) 20 (+/- 2) mm (table rubbed and polished) in pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M & L Paving vitrified parking tiles 300 mm x 300 mm x 8-10 mm thick (heavy duty), set, jointed and pointed in neat cement slurry as in foot path with white cement and pigments complete all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x 30cm x 25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W Gde E-250, Quality - B.

S & F Mild steel hand rails, half round or other steel section or core for hand-rail straight portion. Drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165.

S& F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n exc 15 cm long of 5 to 10 mm dia of neck.

Dismantling Fencing wire mesh, any type.

S & F PVC coated MS galvanised chain link fencing of 2.00 mm dia GI wire and outer dia 3 mm mesh size 75 x 75 mm (including thickness of PVC coating) approved quality all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out emebedded portion of concrete, brick work, masonry and making good disturbed ground.

Excavating in post holes not exc. 0.5 cum in each and getting out in soft / loose soild and removing surplus soil to a distance not exc. 50 mtr and making good the surface.

Providing reinforced cement concrete (nominal mix) type B-I, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n. exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred topes as directed and fixed.

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

DS ENTERPRISES

ELECTRO COMMERCIAL CO

Sagar Electricals

bholanath bera

Bansal And Co

jlenterprise

M/s MANIK SETHI

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

Bansal And Co

Sagar Electricals

ELECTRO COMMERCIAL CO

jlenterprise

bholanath bera

M/s MANIK SETHI