Construction of Ladies Toilet Block at Industrial Canteen, Ordnance Factory Ambarnath

Amount

Construction of Ladies Toilet Block at Industrial Canteen, Ordnance Factory Ambarnath

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for , manholes, etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in hard/dense soil, complete all as specified

M&L for PCC 1:4:8 Type D2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified

S&F Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6

M&L Damp proof course to horizontal or vertical surfaces including necessary formwork, in cement concrete 1:2:4, type B-0, 40 mm thick

M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified

M&L for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for RCC type using 20mm (Type B1 1:2:4, 20mm graded aggregate)as in Slabs supported on walls, beams and columns in floors, roofs, landings and in shelves and the like complete all as specified

M&L for mild steel deformed or twisted bars of 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M&L for Rendering 10 mm thick in Cement plaster 1:6 on ceilings,finished even and smooth with neeru finish

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:6, finished even and smooth with neeru finish

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:6, finished even and smooth without using extra cement

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified

M&L for hardcore of broken stone or boulders exc 63mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled/rammed to a true surface, complete all as specified

M&L for 20mm thick Screed bedding as in floors in cement mortar 1:6 all as specified.

M&L for Non-Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match,( make Somany, Johnson, Kajariya or equivalent)

M&L for glazed ceramic coloured tiles (200x200mm) x 7mm thick, , in vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified ,( make Somany, Johnson, Kajariya or equivalent)

S&F vitreous China squatting pan, `Orissa` pattern, size 680 x 470 mm white, with integral foot rests quatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, complete including making good to floor including trap set in and including concrete complete all as specified.(Make hindustan. cera, ferryware or equivalent)

S&F butt hinges 100mm, heavy weight, cold rolled mild steel complete all as specified

S&F for 250mm long aluminium alloy, anodized sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloys to door shutter complete all as specified

S&F 150mm aluminium handles, cast type, anodised complete all as specified

S&F for 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified

M&L for Tubes, `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified, Bore dia of pipe in 20mm

M&L Tubes, `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified, Bore dia of pipe in 15mm

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, Bore dia of pipe in 15mm

M&L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F of PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 ltrs. Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

S&F of Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of bore 15mm

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, bore 110 mm

S&F PVC (SWR) bends any radius with access door, bore 110 mm

S&F PVC (SWR) vent cowl 110 mm

S&F PVC (SWR) junction single, (Single T) equal or unequal 110 Dia. with access door

M&L for preparation of new plastered surfaces including chalk whiting and applying two coats of dry white wash on ceiling complete all as specified.

M&L for preparing new surfaces (plastered) of walls and applying two coats of cement base paint.

M&L for preparation of new plastered surfaces including chalk whiting and applying two coats of white wash on walls complete all as specified.

M&L for preparation of new surface including pink primer & applying two coats of synthetic enamel paints complete all as specified.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, Bore dia of pipe in 15mm

S&F Vitreous China wash basin, white, flat back, size 600 x 480 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets & fixing of supply and waste pipe

S&F for PVC (SWR) 'P’ trap, Bore in 110 mm

S&F 1st class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) thickness of shutter 30mm

S&F PVC connections 15mm size with PTMT nuts of length 300mm

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified

M&L Cement concrete type B-1, 1:2:4 (20mm graded aggregate), 145 mm thick

S&F 110mm PVC (SWR) WC connector with lip ring

M&L for Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), diameter of outlet in 100 mm

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for 1st class,hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,

M&L for providing PCC 1:2:4 type B0 using 12.5 mm graded aggregate louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame (precast frame shall be measured separately) set in CM 1:4 complete all as specified

S&F Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, 32 mm dia

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, Bore dia of pipe in 15mm

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, Bore dia of pipe in 20mm

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed 20mm.dia.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. ®

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed, in soils

S&F sail glazed stone ware drain pipes laid in trenches and jointed as specified internal diameter of pipe 100 mm

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:6, Setting coat 3mm thick, trowelled to even and smooth finish

M&L Provision of pre cast cement concrete cover slabs (for manhole etc) and similar articles with plain faces, Type B1 1:2:4 (20mm graded aggregate), set in cement mortar 1:6

Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors With grey pigment cement and pigments

S RAJ ENTERPRISES

M/s R R ELECTRICALS