Repair and protective work of approach road of the bridge situated on Sirsa river at Km 1 of Pursar Nagar (Sishat) Sirsa river bridge approach

Cleaning Jungle including uprooting of rank vegetation grass, bush, wood trees and saplings of girth upto 30 cm measured at a height of 1 metre above ground level & removal of rubbish upto a distance of 50 metres outside the periphery of area cleared. AS per SOR Item 259.

Construction of embankment/Patri with approved material obtained from borrow pits with all lifts and all leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Ref. to Mort&H)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. As per Reference to MORT&H Specification 2504 SN.15.50 Rates are including all labour, material, T&P, taxes & labour cess but excludi

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.As per Reference to MORT&H Specification2504 SN. 1540 Rates are i

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. As per Reference to MORT&H Specification 800 Rates

Earth work in Excavation in foundation structures as per drawing and technical specification, including setting out, construction of shoring and bracting removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with

Cement concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 8:4:1 including supply of all material T&P etc. required for proper completion of work.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.

12 mm thick plaster with cement and approved coarse sand in 1:3 over brick work minimum thickness not to be less than 3/8" (10 mm) thick including supply of all materials, labour and T&P etc. required for proper completion of the work.

Cement concrete with 2 cm. (gauge approved stone, ballast, approved coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.279A

M.S. or iron work in M.S. Grills & stair case railling and section such as holding down bolts, hold fast, tieods grading etc. wrought to required from including supply to steel bolt, nuts wastage etc and their fixing required for proper completion of the work. (SI. No.-502a)

Please Enable Macros to View BoQ information