(A) CSMT-Closing of joint waterproofing of service building and roofing joint sheets, and repairs to damaged valley gutters, downtake pipes, etc. of Heritage Mainline Building & mainline Concourse, Parcel Building (PF No. 14/15), Traffic Accounts Building (PF No. 7), TMS Circulating Area, Cabway Area, Luggage Office, Booking Office Cabway, and Electrical Office (PF No. 7) at CSMT. (B) CSMT-Repairs to down take pipe, Water supply & provision of opening door and staging for maintenance of down take and water supply pipeline inside the duct of NAB Under SSE/W/WDI/CSMT. (C)CSMT- Internal and External painting of service building OF RRI PF-18, C&W store building Carnac Bunder, RPF entertainment building, C&W staff room PF-10/11 & PF-14/15 & Parcel bldg. PF-14/15 under SSE/W/CSMT.

The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(Placed at Page No.35 of tender form and document attached), along with copies of Audited Balance Sheets and Profit and Loss statement duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

For details refer attached documents

(a)The tenderer must have successfully completed or substantially completed (For more details refer attached documents), any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (For more details refer attached documents).

Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.

For more details refer attached documents.

Defination of Similar Work :- Any type of civil work viz. building & structures work, pipe lines, underground & overhead tanks, foundation treatment works in any Railway embankment / cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works etc.

To evaluate the technical eligibility of tenderer, only components of workas stipulated in tender documents for evaluation of technical eligibility,shall be considered. The scope of work covered in other remainingcomponents shall be either executed by tenderer himself if he has workexperience as mentioned in clause 7 of the Standard General Conditionsof Contractor through subcontractor fulfilling the requirements as perclause 7 of the Standard General Conditions of Contract or jointly i.e.,partly himself and remaining through subcontractor, with prior approvalof Chief Engineer in writing. However, if required in tender documents byway of Special Conditions, a formal agreement duly notarized, legallyenforceable in the court of law, shall be executed by the main contractorwith the subcontractor for the component(s) of work proposed to beexecuted by the subcontractor(s), and shall be submitted along with theoffer for considering subletting of that scope of work towards fulfilmentof technical eligibility. Such subcontractor must fulfill technical eligibilitycriteria as follows: The subcontractor shall have successfully completedat least one work similar to work proposed for subcontract, costing notless than 35% value of work to be subletted, in last 5 years, ending lastday of month previous to the one in which tender is invited through aworks contract. Note: for subletting of work costing up to Rs 50 lakh, noprevious work experience of subcontractor shall be asked for by theRailway. In case after award of contract or during execution of work itbecomes necessary for contractor to change subcontractor, the sameshall be done with subcontractor(s) fulfilling the requirements as perclause 7 of the Standard General Conditions of Contract, with priorapproval of Chief Engineer in writing. (As per Page- 13,14, Para 10.1.b(3)Part-I of GCC April 2022)

Mandatory submission of qualifications, credentials and technical documents - The bidder/contractor shall upload the certificates of qualifications, degree diploma, credentials and other technical documents required under the tender along with the bid. All certificates shall be issued by recognised universities, institutions or statutory/competent authorities, as applicable, and shall be verifiable. The following minimum arrangements shall be provided wherever applicable to the scope of work

Qualified Engineer(s) holding a recognised Degree/Diploma in the Civil engineering discipline shall be deployed for technical supervision, maintenance of prescribed registers and records, quality control, inspection and testing. Site material tests, including slump test, cube test and other specified tests, shall be carried out in accordance with the applicable IS Codes, Railway specifications and the directions of the Engineer-in- Charge.

The Railway Administration may verify the submitted qualifications and credentials from the concerned University/Institution/issuing authority before award of the work. No change in the approved Engineer(s) shall be made without 1.1.1 prior written approval of the Tender Accepting Authority or the concerned Sr.DEN, as applicable. Any replacement shall be with a person possessing equivalent or higher qualifications and experience, unless otherwise approved.

Self Declaration by Contractor on Letterhead - The bidder shall upload, along with the offer, a declaration on the firm's letterhead, duly signed and stamped by the authorised signatory, confirming that:•The Contractor shall prepare and submit all drawings, design details, method statements, execution plans, programmes, calculations and other documents required under the contract and shall obtain the approval of the competent Railway authority before commencement of the relevant work/activity.•Qualified Engineer(s), Architect(s), Structural/other Consultant(s) and competent supervisory personnel, wherever required, shall be deployed throughout the execution of the work in accordance with the tender conditions.•All mandatory registers, quality records, site documents, inspection records and test reports prescribed in the tender/contract shall be maintained and kept up to date throughout the currency of the contract.•The Contractor shall establish a site laboratory wherever specified in the tender or directed by the Engineer-in-Charge and shall conduct all mandatory quality tests, including slump tests, cube tests, material tests and other tests prescribed under the relevant IS Codes, Railway specifications and instructions of the Engineer- in-Charge.•The Contractor shall provide adequate machinery, qualified manpower, safety equipment and Personal Protective Equipment (PPE) commensurate with the nature, quantity and programme of work.•The Contractor shall have available at site, or shall arrange to make available as and when required, the small construction equipment/machinery listed in Annexure-I, as applicable to the scope of work. Documentary evidence of ownership, lease/hire arrangement or other lawful availability shall be furnished whenever called for by the Engineer-in- Charge.

Declaration of Site Visit - The bidder shall upload the Declaration of Site Visit in the format prescribed as Annexure-F of the tender document, along with the bid. The declaration shall not relieve the bidder/Contractor of any obligation arising from the tender conditions, site conditions or applicable contract provisions

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Tenderer should mandatory submit documentary proof as per the attached checklist document.

The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents.

The Bank Guarantee bond shall be as per Annexure- VIA (Placed at Page No. 35-36 of tender form), and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii).The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. .(i.e. excluding the last date of submission of bids) (iii).Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v).The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii).The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.

All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Tenderers are abiding by the General Conditions of Contract (GCC) April 2022 & any statutory modification thereof and also abide to carry out the work accordingly.

Documentary proof - Tenderer should submit scanned copy documentary proof in regard for fulfilling the Technical /financial eligibility criteria along-with their offer (for details refer attached documents). If the tenderers do not submit any proof of meeting with the eligibility criteria as laid down in the tender conditions, the offer shall be considered as incomplete and shall be summarily rejected. Documents submitted in support of eligibility criteria after opening of tender will not be considered.

Document attached - Tender form

Maintenance period is 12 month.