PROVN OF OPEN SHED FOR PARKING NEAR BLDG NO 286 AND CERTAIN EM MINOR WORKS AT GMS UNDER GE I GOS

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in any type of soil etc complete all as specified and directed

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

Removing excavated material to a distance exc 250m and n.exc 500m and depositing where directed complete all as specified and directed.

M&L Cement concrete 1:4:8, type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L RCC 1:1.5:3, type A1 using 20mm graded stone aggregate as in foundations including rafts, footings etc complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams etc and similar work, vertical or to batter for rough finished flat concrete surfaces complete all as specified and directed.

Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm but not exc 75 cm long and 20 to 25 mm dia of shank complete all as specified and directed.

S&F Plate girder, single stanchions built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections complete all as specified and directed.

S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for pre painted GALVALUME ALUMINIUM ZINC coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with tapping screws complete all as specified and directed.

Preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer all as specified and directed.

M&L PCC 1:2:4, type B-1 using 20mm graded stone aggrgate in any position, not otherwise specified including necessary formwork all as per specified and directed.

Taking down the exisitng ceiling fan and Refixing duly cleaning and minor servicing of any sweep and cap , applying two coats of synthetic enamel paint incl change of ball bearing complete with connecting accessories and down road 15mm GI pipe duly modified to embedd the ceiling fan of approx 1.5 mtr height from the ceiling complete all as specified and as directed.

S&F recess mounting LED low profile slim fit downlights with high lumin out put of 12 wats cap with celing cutout 160mm oval/round of ht 25mm complete prewired incl necessary electrical connections complete all as specified and as directed etc all as specified and as directed (Make : C&S/Havells/Bajaj/Philips)

S&F switch piano (Flush type) 5 Amps 240 Volts, single pole one way complete all as specified and directed Make- Anchor/Havells/Standard/C&S.

S&F celing fan regulator electronic step type socket mounting type complete all as specified and directed Make - Anchor/Havells/ Standard/C&S

S&F recess mounting LED low profile slim fit downlights with high lumin output of 18 watts cap with celing cutout 210x210 mm of ht 17mm, prewired incl necessary electrical connections complete all as specified and as directed ete all as specified and as directed. (Make - C&S/Havells/Bajaj/Philips).

M&L for replacement of 2 runs of cable PVC insulated byt unsheathed 1.5 Sqmm, standed copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 1.5 Sqmm, standed copper conductor complete all as specified and directed (Cable Make - Anchor/HavellS&Finolex)

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/along poles, ducts or through sleeve of size 25 Sqmm 4 core complete all as specified and directed.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying flyash building bricks laid in trenches for LT cable complete all as specified and directed.

S & Fix sheet metal enclosure vertical DBs with provision for FP MCCB frame upto 125A in 16,KA, 25KA, as incomer 4 way double door made complete all as specified and directed. Make Standard/ Indo asian/ Havells/Anchor

Supply & fix MCCB 4 pole 415 V 50Hz, 100A with fixed thermal magnetic release breaking capacity 16 KA complete all as specified and directed. Make Standard/ Indo asian/ Havells/Anchor

S & Fix MCB SPN 32 Amps 10 KA 240 Volts complete all as specified and directed.(Make : Anchor/ Standard/ C&S/Havells/Indo-Asian)

S & Fix MCB, SP 20 Amps 240 Volts rating complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/Indo-Asian)

M&L of 2 Runs of cable PVC insulated but unsheathed 6.0 Sqmm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 4.0 Sqmm, stranded copper conductor complete all as specified and directed. (Make Anchor/ HavellS/Finolex)

Boring across the road/hard surface with mechanical equipments upto 100mm dia bore complete all as specified and directed.

Material and labour for earthing complete with galvanised steel plate earth electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5mtr below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES schedule part-I connection to earthing point and testing on complete with and including 15mm bore light grade GI protection pipe (05 mtr beyond pit to main switch) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1 20mm thick cover reinforced with 6mm dia S bar 3 Nos both ways with lifting hook made out of 6mm dia bar watering arrangement with funnel and wire mesh and 20mm bore light grade GI watering pipe, with adequate quantity of common salt and charcoal dust filling including necessary excavation and earthwork complete all as specified and directed.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including cocealed rigid non metallic PVC conduit medium grade not less than 20 mm (ISI marked ) with all conduit fitting and fixing accessories including sunk in cast iron /pressed steel terminal boxes (duly painted with two coats of anti –corrosive paint outside and two coats of aluminium paint inside) with 2.8 mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators etc and 1.0 sq mm multi strand copper conductor cable as continuous earth wire complete for the One light point controlled by one, one way switch.

All as per item No 30 above but for One fan point controlled by one, one way switch

All as per item No 30 above but for one 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No 30 above but for one 3 pin 5 Amps socket point controlled by one switch on same board

All as per item No. 34 above but with cable PVC insulated 2.5 Sqmm (FR) in and including PVC Conduit incl continuous earthing with cable PVC insulated 2.5 Sqmm copper conductor for power socket 15Amps (Make : Anchor/ Standard/ Finolex/Havells/HPL)

S&F ceiling rose, bakelite three terminal type complete all as specified (Make : Anchor / Standard/ Havells)

Supply and fix Modular switch 1 way 6 A, 1 module complete all as specified and directed.(Make : Havells/Anchor/Legrand/GM Modular)

Supply and fix Modular switch 1 way 16 A, 1 module complete all as specified and directed. (Make : Havells/Anchor/Legrand/GM Modular)

Supply and fix Modular socket, 6 A - 2/3 pin combined 2 module complete all as specified and directed. (Make : Havells/Anchor/ Legrand/GM Modular)

Supply and fix Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. (Make : Havells/ Anchor/Legrand/GM Modular)

Supply and fix Modular fan regulator 120W, 2 Module complete all as specified and directed. (Make : Havells/Anchor/Legrand/GM Modular)

Supply and fix Modular white cover plate with frame 1 module complete all as specified and directed. (Make ; Havells/Anchor/ Legrand/GM Modular)

Supply and fix Modular white cover plate with frame 6 module complete all as specified and directed. (Make ; Havells/Anchor/ Legrand/GM Modular)

Supply and fix Modular white cover plate with frame 12 module complete all as specified and directed. (Make ; Havells/Anchor/ Legrand/GM Modular)

Supply and fix Modular Metal flush box 1/2 module complete all as specified and directed.

Supply and fix Modular Metal flush box 6 module complete all as specified and directed.

Supply and fix Modular Metal flush box 12 module complete all as specified and directed.

S & F recess mounting LED Endura slim pro plus ceiling light suitable for armstrong/grid ceiling complete capacity 36W, sIze 2'x2' complete all as specified and as directed. (Make Havells Cat part No : Enduraslimpproplus2x2PLR28/36WLED857MOD & LED DRIVER 36V36WS)

ABC CONSTRUCTION COMPANY

M/s MAA BHAIRABI ENTERPRISES