Loading
Loading…
Loading…
Updated dates
Tender Value
₹14.2 L
EMD Value
₹28,490
Closing Date
5 Jun 2026, 12:00 pmDue today
Er. Gurpreet Singh Bhains
Office of the Executive Engineer, Electrical Division No. 1, Sector-9,Chandigarh.
REPLACEMENT OF EXISTING DEFECTIVE VCB AND PROVIDING ALLIED ACCESSORIES TO 11 KV INDOOR SUB STATION ISBT, SECTOR-17. CHANDIGARH.
2026_CHD_92207_2
E1/TN-60
Open Tender
Electrical Works
60 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹28,490
27 May 2026
27 May 2026
5 Jun 2026
27 May 2026
5 Jun 2026
27 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing & commissioning of 3 phase, 50Hz, 11KV, 800Amp, 26.3KA/3Sec. incoming VCB panel with copper busbarfor indoor substations. The VCB should be floor mounted trolley type horizontal isolation, horizontal draw out, type Breaker confirming to IEC-62271-100 & Panel as per IEC- 6227I-200, & IEC-60694 as amended up to date., (As per Complete Item No. 1 of the DNIT) | 1 | Each | 9,26,535 | ₹9,26,535 |
| 2 | DSR item No.5.9 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | 25 | P.Mtr. | 160 | ₹4,000 |
| 3DSR item No.23.4.1 supplying and making in door cable end termination The heat shrink able jointing kit complete with all accessories including lugs suitable for following size of 3core,XLPEaluminiumconductorcableof11KV grade as required: | |||||
| 3.01 | 50/70sq.mm | 2 | Each | 12,946 | ₹25,892 |
| 4 | S/E of 4 nos. sand buckets of 10 Ltr. Capacity each made out of 24 Gauge G.I sheet. The buckets with sand shall be hanged on Suitable size of angle iron stand fabricated out of 1 ¼ x 1 ¼ x1/8” angle iron having hooks for hanging the buckets in two rows. The job includes the cost of painting with two coats of red paint of superior quality after one coat of primer on buckets and stands to complete the job up to the entire satisfaction of the Engineer–in–charge. | 1 | Each | 6,090 | ₹6,090 |
| 5 | Supply of Erection of medium size first aid box made of 16 gauge MS sheet of size 14”x7”x5” with 6 wound dressings, 3 burn dressings, 13 gms absorbent cotton wool, one dressing scissors, one bottle of spirit of sal volatile, 1 tube of burn ointment (Burnol) tablets of aspiring, 1 No. artificial respirator. | 1 | Each | 2,430 | ₹2,430 |
| 6 | Supply and Erection of shock treatment chart written in Hindi and English and local language duly framed in wood frame with glass complete as required as per India Electricity Act. (Safety rules). | 1 | Each | 130 | ₹130 |
| 7 | S/E rubber mat of size 6’x3’ 12mm thick (ISI marked) Wide of superior quality and of approved make as approved by the Engineer –in- Charger /EC to be laid on floor in HT room in Front of panels and transformers. | 4 | Each | 3,265 | ₹13,060 |
| 8 | Supply and erection of M.S. sheet danger notice plate at least 2 mm thick. | 4 | Each | 230 | ₹920 |
| 9Supply and Erection of Fire Extinguishers ISI marked duly erected/ hung on wall with hooks including the cost of hooks with all material &labour required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of work. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 9.42 MB
BOQ_113518.xls
BOQ • 0.29 MB
60c.pdf
Tender Documents • 0.75 MB
Download all tender documents and submit your bid