REPAIR MAINT OF ROAD INCLUDING ROAD FURNITURE SIGN BOARDS AT NAVAL DOCKYARD MUMBAI UNDER AGE BR I UNDER GE (NW) KUNJALI COLABA MUMBAI

Amount

Repair to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths, etc. Cutting around edges to atleast 25mm in depth, making good by filling in screened and graded road metal watering and well ramming including supply of road metal. complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparing unsurfaced water bound macadam/ black top surface by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. complete all as specified and directed by Engineer-in-Charge.

Material and labour for applying evenly a tack coat with paving bitumen of VG-10 grade at 5 Kg per 10 Sqm with the help of pressure sprayer complete all as specified and directed by Engineer-in-Charge.

Material and labour for Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 6 % binder content by weight of total mix , rolled and compacted to required camber and gradient complete binder content of grade VG-30, laying with mechanical paver complete all as specified and directed by Engineer-in-Charge.

Material & labour bituminous premixed carpet, 2 cm consolidated thickness, with 0.27 cu.m. of stonechippings mixed with 14.6 kg of binder, rolled and compacted to required camber and gradient® complete all as specified and directed by Engineer-in-Charge.

Material and labour premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface ® complete all as specified and directed by Engineer-in-Charge.

Material and labour for premix bituminous macadam 50mm consolidated thickness by using paving bitumen VG-30 grade with binder content @ 4% by weight of total mix, laying with mechanical paver, rolled and compacted to required camber and gradient by using 8 to 10 tonne capacity power roller complete all as specified and directed by Engineer-in-Charge.

Supply and fixing precast road side Kerb stone M-35 grade of size 400x300x100mm smooth finish &fixed in CM 1:4 with & including necessary earthwork. complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth, interlocking tile, paver blocks or wall tiling including cement mortat bedding but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Material and labour Machine pressed precast concrete interlocking coloured paver block confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with & incl 50mm thick sand cushioning complete all as specified and directed by Engineer-in-Charge.

Supply and fixing rubberized speed check system (Speed Retarders) square pieces of size 340 mm x 250 mm & 50 mm height of black & yellow combination with reflectors on both sides, fixed in position with adhesive & nails as per manufactures instructions including end caps on both ends fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs for luminous cat eye fittings of automate road cats Pvt Ldt (AME-1019) or as approved by GE fixed on bituminous road at center/sides complete all as specified and directed by Engineer-in-Charge.

Supply and fix SOLAR Studs yellow/orange/red colour ABS body plastic IRC 67 having road capacity of 40 ton having reflector yellow colour both sides and size 10cm x 10cm fixed on the road edges complete all as specified and directed by Engineer-in-Charge.. Model No 3001 Make Automat Road safety Pvt Ltd, or as approved by GE

Supply and fixing MS Delineator SVD-3, 1200mm long, 75mm dia M.S. pipe medium grade, with HIP 75mm around. Three strip and with mesh, with yellow, green, red Hi reflective tape including vertical MS pipe, post holes, PCC bedding of size 45x45x60 cm, synthetic enamel painting etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing polycarbonate Convex mirror of dia 80 cm including vertical MS pipe, post holes, PCC bedding of size 45x45x90 cm, synthetic enamel painting etc complete all as specified and directed by Engineer-in-Charge. etc fixed in repairs.

Preparation of black bituminous road surface and applying thermo plastic road marking paint (including dashes, arrows, letters etc) minimum 2mm thick, with an applicator machine and heated mixer, with stirring mechanism at temperature 160)C, laid uniformly with width as directed, paint conforming toBS-3262 part I & II of 1989 etc, complete as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge.

MUKESH CONSTRUCTION CO

ASHOK CONSTRUCTION

RAJENDRA CONSTRUCTION

RENJIN CONSTRUCTION

M/s Terra Infraventures