Replacement of street light and Misc electrical works under the jurisdiction of AE(Electrical),MTNL,Karol Bagh,New Delhi

Amount

Replacement/S/F of suitable size pole box made out of polycarbonate thermoplastic enclosure shock proof, rust proof, water proof having internally embedded gasket, fixing on existing GI poles/wall with 2 nos. factory fabricated GI clamps (wherever required)/ pole box fixing arrangement, complete with 1 no. 6 ampSP MCB of approved make and interconnections etc. as reqd. (Pole box make: Sintex)

Supplying and drawing following size of FRLS PVC insluated copper conductor, single core cable in existing surface / recessed steel/ PVC conduit/PVC chanel as required.Make-M/s KEI/Polycab/Havells/Finolex a) 3 x 1.5 sqmm

b) 3 X 4 sqmm

Replacement of 25 to 30W, IP-66, LED street light luminaires having Aluminium die cast housing and clear toughened glass with synthetic rubber gasket, integral gear on existing pole/ bracket suitable for operation on 230V, 50Hz, single phase AC supply complete as reqd. (Make: Surya / Crompton/ Havells / Bajaj / Philips/Syska/Orient/Polycab)

Replacement of existing Gate light with new 25 to 30W LED post-top Gate Light fitting with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source & suitable modification work of existing pole according to the size of above fitting etc and dismantling the old faulty fitting etc as reqd (Make: Crompton/ Havells / Bajaj / Philips/Syska/Orient/Polycab)

Replacement of 7 to 9 watt energy efficient LED bollard light fitting(minimum up to 500 mm height (apx ) with LED bulb of 9W) i/c grouting nut bolt in existing foundation etc as required. (Make : Philips / Bajaj / Havells/Crompton/polycab/SS).

S/L of following sizes PVC insulated and PVC sheathed armoured copper cable and fixing on the wall /existing pipe/laying in under ground etc as reqdMake-M/S poly cab/KEI/Havells/Finolex a)3 c x 1.5 Sqmm copper

b)2c x2.5 sqmm Copper

c)3C x2.5 sqmm

Supplying and fixing following rating MCB/Isolator in the existing SDBs connections complete as reqd.-M/s Havells/Legrand/L&T/ABB/C&S a)63 Amp DP Isolator

b)5/15/32 A SP MCB " C" curve

Providing and fixing G.I pipe bracket fabricated out of 32 mm dia G.I pipe (medium class) of length 1.5 mtr.bend at an angle of 120 degrees suitable for fixing of existing street light luminaire i/c pdg./ fixing 2 Nos M.S clamps, sufficient nut bolts/fastner on exsiting wall etc complete as reqd.

Providing and fixing G.I pipe bracket fabricated out of 50 mm dia G.I pipe (medium class) of apx 2ft height suitable for 25 W to 30 W gate light fitting and fixing it in the existing piller i/c cutting repairing the same , painting the pipe etc as reqd

P/F CC Foundation of size 600 mm x 300 mm of ratio 1:2:4 i/c excavation & plastering works suitable for bollard light etc complete as reqd

P/F of following sizes plastic body fresh air fan and fixing in the existing opening with connection testing etc as reqda)250 mm Make-M/s Crompton/Havells/Usha

Less credit for dismantled material (Dismantling of old fittings,cables,GI pipe,Light fittings etc are required as per the instruction of engineer in charge) Note: If ITC of some items not done at site then 10% of quoted rate of corresponding item will be deducted on this account.

Handa Electric Works