PETTY REPAIR OF DAY TO DAY MAINT AT MIL STN BD BARI UNDER GE KALUCHAK

S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F 25mm dia Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete as in repair complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for prefixing or removal complete all as specified and directed.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. Including taking down complete all as specified

Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed Including taking down complete all as specified

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for prefixing or removal complete all as specified and directed.

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.including taking down complete all as specified and directed.

Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed Including taking down complete all as specified and directed.

S & F in repair Sintex water tank cover (Dhakkan) tied with wire for 500 and 1000 Ltr capacity water storage tank complete all as specified and directed.

S & F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.

S & F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms complete all as specified and directed.

S & F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in Repairs of rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed

S & F in Repairs brass spindle suitable for Cp piller tap,cp bib tap,angle cock all as specified and directed.

S & F in repairs Peg stays to steel windows complete all as specified and directed.

S & F in repair mild steel handles to steel windows complete all as specified and directed.

S/F in repair 32mm bore PVC waste down take pipe 900 to 1000mm fixed in WHB complete all as specified and directed.

S/Fin repair 40 mm bore PVC waste down take pipe 900 to 1000mm fixed in sink complete all as specified and directed.

Dismantling cast iron, PVC or reinforced concrete drain pipes of 75/100mm bore, fixed with walls and taking out of trenches, if required all as specified and directed.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed.

S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 40 mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed. Make : cera or its equivalent complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and directed.

S&F in repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair complete all as specified and directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S&F glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all as specified and directed.

Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including CP coupling 32mm dia complete all as specified and directed.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl P or S trap and in cluding plastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and complete all as specified and as directed.

Dismantling floor, hearth or wall tiling , terrazzo topping on walls including cement mortar , bedding (but no backing) removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M & L joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling of tiling including cement mortar bedding (Including backing) and rubbish off the premises complete all as specified and directed.

M & L joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,on wall, skirting,dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick rough Plaster in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid/mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L Joint free Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 2 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of wearher coat paint over primer complete all as specified and as directed.

M&L for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Material and labour preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed.

Material and labour applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 500 ltr but not exc 1000 ltr complete all as specified and directed.

Dismantling water tanks of any description 1000 Ltrs capacity complete all as specified and directed.

Dismantling water tanks of any description 500 Ltrs capacity complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 15mm Flot Ball Valve dismantling of old PVC/RCC water tanks complete all as specified and directed.

All as per srl item No 65 above but water storage tanks of 1000 ltrs capacity complete all as specified and directed.

S & F in repair low level flushing cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting including taking out unserviceable flushing cistern and flush pipe etc complete all as specified and directed.

Taking down shutters of any description nexc 1 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed.

All as per serial item No 68 here-in-before but exc 1 sqm and nexc 2 sqm each complete all as specified and directed.

Resecuring or easing & adjusting, without taking down shutter of any description nexc 1 sqm each complete all as specified and directed.

All as per item ser No 70 here-in-before but exc 1 sqm and nexc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed.

All as per ser Item No 72 above but n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each and removing from the site complete all as specified and directed.

S&F for Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F for Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F Factory made 30 mm thick plain framed panelled shutter (two panel) of second class hard wood rail and style with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS : 1003 Part I, klin seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

S&F MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified and directed.

S&F for mild steel barrel tower bolts 150 mm size, stove enamelled black, with bright bolt fixed in repairs complete all as specified and directed.

S&F for mild steel pressed handles 150 mm size stove enamelled black complete fixed complete all as specified and directed.

S&F for mild steel sliding door bolts 'bolt type' 250 mm size stove enamelled black with and including 6 nuts and bolts complete fixed in repairs complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed.

S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified and directed.

Supply & fix in repairs stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with chromium plated screw complete all as specified and directed.

S&F in repairs 40 mm dia, cupboard knobs fixed with nut, screw and washer of stainless steel, bright finished complete all as specified and directed.

Supply & fix in repair 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed.

S&F magnetic in reapir catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed complete all as specified and directed.

Description all as per serial item No 95 here-in-before but frosted glass complete all as specified and directed.

M & L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed complete all as specified and directed.

S&F in repairs corner glass shelves 225mm fixed to wooden plugs with chromium plated brass screws and cup washers complete complete all as specified and directed.

S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24"x24" incl shelves, rod to put plates etc and fixed to wall complete all as specified complete all as specified and directed.

S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia complete all as specified and directed.

S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

Note - Rate quoted above all items inclusive provision as under :Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Contractor shall be given user id and password for accessing the online complaint portal and contractor shall at his own expense by himself or his representative feed the data in r/o complaints so generated. (b) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE in charge of the cell for updation of manual registers. (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication and conveyance (as required) facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints on a daily basis. (g) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard.

Taking down carefully existing aluminium conductor point wiring (light / fan / socket or power point) complete, with all fittings such as switches, socket, regulator, ceiling rose, utility light fittings and lamp holders etc and removing materials from site and making good the disturbed surfaces of walls roof and floor etc as per existing specification complete all as specified and as directed.

Taking down existing unserviceable distribution board, switch fuse unit, enclosure for MCB / DB (inclusive of MCBs of any type and capacity) and making good the disturbed surface all as specified and as directed.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed.

Taking down Electric meter any type including disconnection electrically and refixing the same at same or new location as directed and specified by the Engineer in charge.

Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes, with provision of 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface and match the existing surface complete all as specified and as directed.

All as per item no-110 above but for one fan/Exh point controled by one piano switch on the same board with other switches or independent all as specified and as directed.

All as per item no-110 above but for one bell point controled by one bell push on the same board with other switches or independent all as specified and as directed.

All as per Item no 110 above but for one three pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 110 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 110 here-in-before but for one15 Amp 5/6 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Material and labour for point wiring for one light controlled by one,one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawnin existing capping and casing with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in pressed steel sunken boxes , with provision of 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc all as specified and as directed.

All as per item no-116 above but for one bell point controled by one bell push on the same board with other switches or independent all as specified and as directed.

All as per Item no 116 above but for one three pin switch socket outlet, 5 Amp on independent board all as specified and as directed.

All as per Item no 116 here-in-before but for one switch socket outlet, 5 Amp on same board with other switches all as specified and as directed

All as per Item no 116 here-in-before but for one15 Amp 5/6 pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed.

Supply and fixing switch piano made of urea formaldehyde flush button single pole one way 6 amps all as specified and as directed .

Supply and fixing switch piano made of urea formaldehyde flush button single pole one way 15/16 amps all as specified and as directed .

Supply and fixing socket out let single made of urea formaldehyde 3 pin 6 Amp, flush type, 240 volts 50Hz, ISI marked complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fixing socket out let single made of urea formaldehyde 5/6 pin 15/16 Amp, flush type, 240 volts 50Hz, ISI marked complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fixing bell push, made of urea formaldehyde ,flush type 6 amps all as specified and as directed.

Supply and fix in replacement of Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fix in replacement of Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed at site by the Engrs-in-Charge.

Supply and fixing in replacement single pole and neutral enclouser with two pin and earth plug and socket complete with one single pole MCB 20 Amps ,240 volts complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite three terminals made of urea formaldehyde all as specified and as directed.

Supply and fixing Lamp holder PVC case body of Bakelite with back plate made of urea formaldehyde suitable for batten fittings , all as specified.

Supply and fixing Electronic fan regulator stepped type with five step ,two module, 100Watt 240 volts, made of urea formaldrhyde complete all as directed.

Supply and fixing electronic ding dong door bell musical sound 230 volt ,AC single pole complete all as specified.

Supply and fixing LED light fitting 1x20 watt, 220 volts AC decorative box type with driver, holder including LED tube linght connecting up with three core flexible copper conductor cable suitable size from ceiing rose and taking down existing unserviceable luminaire complete all as specified and directed .

Supply and fixing fully diffused recessed mounted luminaire 2'x2' LED 36Watt suitable for POP/Gypsum false ceiling complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Supply and fix in replacement of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into existing concealed PVC conduit including taking down old unserviceable submain wiring complete all as specified and as directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm and one single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into existing concealed PVC conduit including taking down old unserviceable submain wiring complete all as specified and as directed.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 4 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing including taking down of existing of unserviceable DB, and confirming to IS : 8623. complete all as specified and as directed.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 8 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing including taking down of existing of unserviceable DB, complete all as specified and as directed. and confirming to IS : 8623.

Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing including taking down of existing of unserviceable DB, complete all as specified and as directed. and confirming to IS : 8623.

Supply and fix in replacement of Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 25 KA 0f size 63 amp complete all as specified.

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 40 Amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge.

Supply & fixing MCB Isolator DP 40 Amps , 240 volts all as specified and as directed by the Engineer-in-Charge.

Supply & fixing MCB Isolator DP 63 Amps , 240 volts all as specified and as directed by the Engineer-in-Charge.

Supply & fixing MCB Isolator TP 63 Amps , 415 volts all as specified and as directed by the Engineer-in-Charge.

Supply & fixing MCB Isolator four pole 63 Amps , 415 volts all as specified and as directed by the Engineer-in-Charge.

Supply & fixing MCB Single Pole (SP) of capacity 6 to 40 amps , 240 volts in proper position all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repairs Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 1.5 Sqmm , complete all as specified and directed.

Supply and fix in repairs of Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 2.5 Sqmm , complete all as specified and directed.

Supply and fix in repairs Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 4.00 Sqmm , complete all as specified and directed.

Supply and fix in repairs of Single core unsheathed 1100 volts PVC-FRLS insulated wire with copper conductor(multistrand) ISI marked of size 6.00 Sqmm , complete all as specified and directed.

Supply and fix in repair of plug top 3 pin 16 Amps,240 volts complete all as specified and as directed.

Supply and fix in replacement fan capacitor of 2.5/3.5 mfd suitable for ceiling fan and exahaust fan complete all as specified and directed.

Supply and fix PVC casing capping 20mm wide on wall/roof (ISI marked, interlocking type), with all fittings complete all as specified.

Supply and fix PVC casing capping 25mm wide on wall/ceiling (ISI marked,interlocking type) , with all fittings complete all as specified.

Supply and fix Laminated sheet bakelite 3mm thick, cutting to 9"x11" size, drilling holes for mounting switch socket/regulators, fixing screws and GI covers with cup head washers complete, all as specified.

Supply and fixLaminated sheet bakelite 3mm thick, cutting to 5"x7" size, drilling holes for mounting switch socket/regulators, fixing screws and GI covers with cup head washers complete, all as specified.

Supply and fix Laminated sheet bakelite 3mm thick, cutting to 7"x9" size, drilling holes for mounting switch socket/regulators, fixing screws and GI covers with cup head washers complete, all as specified.

Supply and fixing plug top 5 amps capacity fixed in repairs complete all as specified and as directed.

Please Enable Macros to View BoQ information