SBM 2.0 COMMUNITY TOILET (MAINTANCE ) Scheme 2024-2025

Amount

Dismantling and Clearing away from this site for exisiting damaged condition of work including cost for all labour charges etc., Complete as per standard Specification. Water closet

Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

A) Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

B) Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Paving the floor with Vertified tiles of approved make and quality and clour of size 300x300x10mm in cement mortor 1:3, 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications

Painting the old iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications

Painting the new walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)

Charges for conducting Geophysical survey to lcate favorable point for drilling borewell point including cost of transformation of machinery and labour charges etc. complete complying with standard specification. (Approved local rate)

Drilling 110 mm” dia deep vertical bore well in hard rock area in any Required depth as decided by the departmental officer including inserting the casing pipe etc complete as per standard specifications

Supply and delivery of 150mm PVC casing pipe (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification.

.Supply of single phase Sub mersible motor with Pump set as per ISI 8034 with Panel board of 20 lpm X 125 M of approved quality including cost and conveyance of all materials and all labour charges and other incidental charges to site etc., complete as per standard specification.

Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter,Ammeter,Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days

Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 32 mm dia UPVC pipe

32 mm dia UPVC LBOW

32mmdia pvc MTA

32mm Dia non Return value

32mm dia GI Union

32 mm x 25mm dia UPVC Reducer

110 mm dia PVC Pipe

110 mm dia PVC Elbow

110 mm dia PVC air vent cowl

1000 lt HDPE TANK;

25 mm dia UPVC TEE

25 mm dia UPVC PIPE

25MM X 20MM PVC REDUCER ELBOW

2.50 mm Flate vertified cable

Incinerators for Ladies bathroom (for school works

Towards labour charges for fixing of PVC ,GI pipe and (CM) including cost and conveyance of all materials and all labour charges etc complete as per standard specification. 25 mm dia UPVC pipe:25 mm dia UPVC pipe:

75 mm dia UPVC pipe:

110 mm dia PVC pipe:

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch influshwith wall covered withhylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) SD 22

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mmTW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion withsuitable colour for open PVC plug point SD 36

Wiring with 2 x 4 sq.mm. (56 / 0.3mm) PVC insulated SC unsheathed copper cable conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MSswitch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wireconnection by 14 SWG TC wire for open power plug point SD384

BABUNATHAN AND CO (BID ID -1083629)