Raiiv Gandhi Infotech Park Hinjewadi Expansion and Modification of existing WTP 24 MLD to 48 MLD by SS 304 V wire under drain system and strengthening of structures using CFTRI approved treatment and allied works at Hinjawadi water treatment plant

Amount

Removing the existing filter media sand & supporting gravel from the filter bed i.e.any lead & lifts i.e. screening the gravel with approriate mesh sieve & stacking the media & travelas directed by the Engineer incharge

Dismantling theR.C.C.Work 1:2:4 and sorting out the materias such as steel etc.as directed and stacking them within the specified lead as directed etc. complete.

Dismantling dead pipeline of M.S./ R.C.C./ C.I./ P.S.C. and G.I./ A.C./ P.V.C./ S.W./ H.D.P.E.pipeincludingcostof necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directedby Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete. (A)ForM.S. /R.C.C. /C.I. / P.S.C. (2) 100 mm(

Providing, Cutting, Drilling, Making & Laying UPVC 110 mm OD 12.5 kg/cm2 Agri high pressure Pipes fo V-wire Nozzel Under drain Systemas per approved design,drawing & as per direction of engineeer-incharge ncluding required all fittings material labour, transport etc Complete.

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, and roughening th esurface if special finish is to be provided and curing etc. complete. (Excluding rein for cemen and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Drilling holes in existing concrete structure for reinforcement anchoringwith the help of HILTY- 500 chemical including locating existing reinforcement with the help of device PS-35 including all labour material machinery transportation charges excluding cost of

Providing and fixing in positionTMT- FE- 500bar reinfor cement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings,fins,archesetc.as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars,binding with wires or tack welding and supporting as required complete

Supplying of SS-304 Vwire Nozzles, wedge tangle high rate straining and accumulation system (HRSA) for rapids and filter bedunder drain system wedge tangle soltwillbe0.3mm,the OD of tangle 65mm & over all depth 45 mm , the solt opening shoude be horizontal, slot shape should be widening inwardly etc.. complete.

Providing PP Air stems suitable forV-wire No zzles & as per approved drawing / design

Providing PP Nuts for air stem for V-wire Nozzles & as per approved drawing / design.

Supply of Filter media fine quality sand fro many source having effective size0.45 to 0.70 and uniformity coefficient with in the limit of 1.3to1.7 within premises as per IS:8419 Part-I of 1977 including transpotation, loading, unloading, stacking and for all leads.

Conveying, filling and laying filter media sand in filter beds properly in grades including 100meter lead including all labour and tools , cleaning work etc complete.

Providing and applying well mixedpolymer cement slurry (Polymer cement ratio 1:2) over soaked but surface dry concrete and steel rebar for adhesionof fresh cement and sand mortar as per specification and as directed etc. complete. (IPTS MC 76 /Indobond AC)

Providing applying repair polymer mortar of thicknessasper sitecondition and in a mixof 1:5:15 (1Polymer :5 cement :15 sand) over freshly applied polymer cement slurry including keeping upto 8to10 mmshort of outer surfaces and scarifying the exposed surface for mech anicalbonding o fpoly me rmodified mortar as per specification complete including scaffolding curing etc. ((IPTSMC76 /Indobond AC)

Providing & applying base coat of Epoxy polymide gel coat of (1:0.8) proporation Resin ToHardner) including surface clean ingby wirebrush &removingdirt,overexisting concrete or acrylic polymer modified plastered surface, including all labour, scaffolding if necessary etc.

Providing and applying 100% Solids polyurethane coating over the Primer coat of polymide gel top coat purethane at nominal thickness as per specification usingplural componentswith suitable applicationmethod and required equipment coating to be certified for food graded PU as per CFTRI or equivalent standard (Rate excluding GST)

Providing and injectinge poxy grout including structuring of crack in the body of slab girder by sand blasting, fixing inlet tube arrangement including cost of materials, machinery required for the work and labour charges etc. complete.

Providing ,laying, jointing SS 304 pipes including specials, cost of material required for its jointing ,all taxes,duties octroi, loading, unloading, transportation,all labour, material,machining, grinding, rolling, welding, testing etc. complete.

Providing and supplying at site of spheroidal graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with hand wheel &without bypass arrangement. in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductileiron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated approved (approved EPDM for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) (4) 150 mm.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testingetc. complete. (Rate for all class of valves.) Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves (6) 150 mm.

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on utomatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to unloading, stores, stacking, excluding GST levied by GOI & GOM in all respect etc. omplete as per IS- 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). (a) Dia of Pipe : 200.00 mm (I. D. ) Thickness of pipe : (4) iv) 8.00 mm

(b) Dia of Pipe : 250.00 mm (I. D. ) Thickness of pipe (6) 10.00mm

© Dia of Pipe : 300.00 mm (I. D. ) Thickness of pipe (6) 10.00mm

(d) Dia of Pipe : 350.00 mm (I. D. ) Thickness of pipe : (6) 10.00 mm

Welding in all positions with required number of runs, for M.S.pipes in ternallyand/or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. 10 mm.

Providing, erecting & Commissioning of Electric Motorized Valve Actuator for nonrising Spindletypesluice valve, ButterflyValve, Sluice GateofPN1toPn-1.6rating With integral starters, operrating panel ,Cable,Cable Tray. Including all material & Labour ete Completed (23.1) For 150 mm Valve

For 200 mm Valve

For 250 mm Valve

For 350 mm Valve

Fo 400 mm Valve

For 450 mm Valve

For 600 mm Valve

Supplying,erecting, testing & commissioning of twin lobo typer otary Airblowerhaving capacity 1200 Cum/hr ,Pressure rating 0.4 kg/cm2 with suitable motor erectedona common frame with proper coupling and electric control panel required cable, as per detailed specification & erected on base frame & embedded in provided CC foundation including Material,Labour,Trial & testing etc. completed .*(ForOld1st & 2 nd Stage 4 Filter Beds )

Supplying,erecting, testing & commissioning of twin lobo type rotary Airblower having capacity 650 Cum/hr ,Pressure rating 0.4 kg/cm2 with suitable motor erectedona common frame with proper coupling and electriccontrolpanel required cable, as per detailed specification & erected on base frame & embedded in provided CC foundation including All Material,Labour,Trial & testing etc .completed .(Forexisting3 rd Stage )

Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting,fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, bracesetc.and including one coatofanticorrosivepaintand over it two coats of oil painting of approved quality and shade etc. complete.

Providing and laying cement concretepipeof IS458:2003 NP-2 class of 450mm diameter inproper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and constructing Brick Masonry Inspection Chamber 90cmx 45cmx 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogram with frame etc complete.

Supplying , insttaling and giving trial test for HRSCC MECHANISM for capacity enhancement of existing CLF tanks Size-25.90 Mtr.DIA x 3.9 Mtr.SWD + 1 Mtr. FB, Flow= 1050 cum/hr as per approved design and drawing including all civil, mechanical & electric work required material labour etc. completed job (For Existing CLF Tank-1 no Dia- 25.90 meter )

Supplying , insttaling and giving trial test for HRSCC MECHANISM for capacity enhancement of existing CLF tanks Size-18 Mtr.DIA x 3.5 Mtr.SWD + 1 Mtr. FB, Flow= 500 cum/hr as per approved design and drawing including all civil, mechanical & electric work required material labour etc. completed job (For Existing CLF Tank-2 no Dia 18 meter )

Providing, erecting and giving trial test for SS-304, all welded wedge wire flat Screen Segments with surrounding support and frame. having 0.300 mm Screen slot (Aperture) opening at top , total 450 to 500 mm hight , 3 mm plate thickness. size of screen Segments sutible for existing CLF tank and as per approved desigen and drawing including all required material , Support rib, angle, bpttom plate , vertical plate screen panel ,square bar ,transportation,Loading, Unloding , Scaffolding, Labour etc completed (Rate Excluding GST) (For Stage- 1 st & 2 nd CLF tanks- 2 nos (18 meter dia )For stage- 3 rd CLF tank-1 nos ( 25.90 meder dia)

Providing internal cement plaster12mm thick in single coat cement mortar1:3 without neeru finish to concrete orbrick surfaces, in all position including scaffolding and curing etc. complete.

Providing and fixing 40mm diameter and 1.5mm thick Stainlesssteel handrailing in S.S.304 Grade including fabricating ,fixtures, errecting,necessary welding, grinding, finishing, buffing to stainless steel pipe etc. Complete

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approvedbrand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of naturalorartificial light. It contains Graphene andnanoparticlesof titanium oxide. andAbsorbsCO2(4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to appliedonone coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The works houldbedone by the Manufacturer Recommende dapplicator and he shouldbeable to furnish stage wise onsite technical reports from the concerned company technologist.

Providing and applying impression 24 carrat Luxury paint of approvedmake & approved brand Emulsion paint to interior walls and ceilings of approved quality colour and shade to new surface in including two coats, sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC)

Rebate for old scraped items including sand, valve, pipe, blower, strctural Steel and related items

Providing, Cutting, Drilling, Making & Laying UPVC 110 mmOD 12.5 kg/cm2 Agri high pressure Pipes for V-wire Nozzel Under drain Systemas per approved design,drawing & as per direction of engineeer-inchargeincluding required all fittings material labour, transport etc Complete.

Providing and laying Cast in situ/Ready Mix cement concrete inM-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying /pumping, compaction and roughening thesurface if special finish is to be provided and curing etc. reinfor cement and structural steel).with fully automatic microprocessor basedPLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. Withfineaggregate (Crushed sand VSI Grade)

Drilling holes in existing concrete structure for rein for cement an choring with the help of HILTY- 500 chemical including locating existing reinforcement with the help of device PS-35 including all labour material machinery transportation charges excluding cost of reinforcement. For 12 mm dia

Providing and fixing in positionTMT- FE- 500bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings,fins,archesetc.as per detailed designs, drawings and schedules. including cutting, bending, wires or tack welding and supporting as required complete.

Supplying of SS-304 Vwire Nozzles, wedge tangle high rate straining and accumulation system (HRSA) for rapid sand filte be dunder drain system wedge tangle soltwillbe0.3mm,the OD of tangle 65mm & over all depth 45 mm , the solt opening shoude be horizontal, slot shape should be widening inwardly etc.. complete.

Providing PP Air stems suitable forV-wire Nozzles & as per approved drawing / design.

Providing PP Nuts for air stemforV-wire Nozzles & as per approved drawing / design.

Supply of Filter media fine quality sandfro manysource having effective size0.45 to 0.70 and uniformity coefficient withinthe limitof 1.3to1.7 within premises as per IS:8419 Part-I of 1977 including transpotation, loading, unloading, stacking and for all leads.

Conveying, filling and laying filter media sandn filte beds properly in grades including 100meter lead including all labour and tools , cleaning work etc complete.

Providing and applying well mixed polymer cement slurry (Polymer cement ratio 1:2) over soaked but surface dry concrete and steel rebar for adhesion of fresh cement and sand mortar as per specification and as directed etc. complete. (IPTS MC 76 /Indobond AC)

Providing applying repair polymer mortar of thickness as per sitecondition and in a mixof 1:5:15 (1Polymer :5 cement :15 sand) over freshly applied polymer cement slurry including keep in gupto 8to10 mmshort of outer surfaces and scarifying the exposed surface for mechanical bonding per specification complete including scaffolding curing etc. (IPTSMC76 /Indobond AC)

Providing & applying base coat of Epoxy poly mide gel coat of (1:0.8) proporation Resin ToHardner) including surface cleaning by wire brush &removingdirt,overexisting concrete or acrylic polymer modified plastered surface, including all labour, scaffolding if necessary etc.

Providing an dapplying 100% Solids polyurethane coating over the Primer coat of polymide gel top coat purethane at nominal thickness as per specification usingplural componentswith suitable application method and required equipment coating to be certified for food graded PU as per CFTRI or equivalent standard (Rate excluding GST

Providing ,laying, jointing SS 304 pipes including specials, cost of material required for its jointing ,all taxes,duties octroi, loading, unloading, transportation,all labour, material,machining, grinding, rolling, welding, testing etc. complete.

Providing and supplying at site of spheroidal ductile iron / graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated approved (approved EPDM for WRAS rubber drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16) (4) 150 mm.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testingetc. complete. (Rate for all class of valves.) (a) Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves (6) 150 mm.

Manufacturing, providing and supplying spirally welded / ERW/ SAW/ fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to requiredsizerolling, tack welding as sembling insuitable lengthstoformpipes,welding onautomaticweldingmachine andforming ‘V’ edgeonboth ends of pipes including railway freight, insurance, unloading from railway wagon, loadingintotruck, transport to stores, unloading, stacking, excludingGST leviedbyGOI & GOM in all respect etc. complete as per IS-3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible) (a) Dia of Pipe : 200.00 mm (I. D. ) Thickness of pipe (4) iv) 8.00 mm.

(b) Dia of Pipe : 250.00 mm (I. D. ) Thickness of pipe : (6) 10.00mm

© Dia of Pipe : 300.00 mm (I. D. ) Thickness of pipe (6) 10.00mm

(d) Dia of Pipe : 350.00 mm (I. D. ) Thickness of pipe (6) 10.00mm.

Welding in all positions with required number of runs, for M.S.pipes internally and/or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. (vi) 10 mm

Providing, erecting & Commissioning of Electric Motorized Valve Actuator for non rising Spindletype sluice valve, ButterflyValve, Sluice GateofPN1toPn-1.6rating With integral starters, operrating panel,Cable,Cable Tray. Includingallmaterial& Labour ete Completed For 150 mm Valve

For 200 mm Valve

For 250 mm Valve

For 350 mm Valve

Supplying,erecting, testing & commissioning of twin lobo type rotary Air blower having capacity 650 Cum/hr ,Pressure rating 0.4 kg/cm2 with suitable motor erectedona common frame with proper coupling and electriccontrolpanel required cable, as per etailed specification & erected on base frame & embedded in provided CC foundation including All aterial,Labour,Trial&testing etc.completed.(Forexisting3 rd Stage )

Providing and fabricating structural steelwork inrolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting,fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, bracesetc.andincludingone coatofanticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavate dmaterialuptoa distanceof 50m. Beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, wateringincludingshoringand strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distanceof50metres be yond the building area and stacking as directed, including dewatering,preparing the bed for the oundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete(liftupto1.5m) By Mechanical Means

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material andstacking it in measurable heaps within a distance of 50metres from the building area including dewatering and back filling withavailableearth/murum, watering, ramming, etc complete. (Lift upto 1.5m) By Mechanical Means

Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneissmetal with15%plum of trapstones for foundation andbeddingofretainingwalls and jetty etc. including necessary for mwork, compacting, curing, bailing out water manually in tidal range etc. complete.

Providingand laying Cast insitu/Ready Mixcement concreteinM20of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete, With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 10.0 to 19.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Disposal of surplusexcavated materials upto specified lead andall lifts including loading, unloading and stacking as directed by Engineer-in-Charge etc. complete LeadBeyond2.00km&Upto 2.50 Km

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversibleDrumTypemixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fineaggregate(Crushed sand VSI Grade)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings,fins,archesetc.as per detailed designs, drawings and schedules. including cutting, bending, hook in gthebars ,bindingwith wires or tack welding and supporting as required complete

Providing second class Burnt Brick masonry with conventional/ I.S. type bricksincementmortar1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

SolidCore Flushdoor Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202- 1962 (Revised) with approved fac veneerson both faces with/without glazingandvenetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer beforeuse)Commercial Hard Wood shutter

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02mmat weight 0.547 Kilogram/R. M.. and window frame bottom track section61.85x31.75x1.20 mm at weight 0.695 Kilogram/R. M.. Top and side track section 61.85 x 31.75x1.30mmatweight 0.659 Kilogram/R. M.. The shutter shouldbeof bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/R. M.. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/R. M.. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/R. M.. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mmthick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and fixing 50mm diameter and 1.5 mm thick vertical and top Stainless steel hand railing in S.S.304 Grade with Stainless steel square / circular pipe bracing of size 32 mm x32mm x1.5 mm in 3 rows including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, leaning and Mirror Polishing etc complete Note- Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer )

Supply of portable ultrasonic flow meter ( 13 mm to 6000 mm)

Providing, Cutting, Drilling, Making & Laying UPVC 110 mm OD 12.5 kg/cm2 Agri high pressure Pipes for V-wire Nozzel Under drain System as per approved design , drawing & as per direction of engineeer-incharge including required all fittings material labour, transport Complete.

Providing and applying well mixed polymer cement slurry (Polymer cement ratio 1:2) over soaked but surface dry concrete and steel rebar for adhesion of fresh cement and sand mortar as per specification and as directed etc. complete. (IPTS MC 76 /Indobond AC)

Providing polymer applying mortar repair of thickness as per sitecondition and in a mixof 1:5:15 (1Polymer :5 cement :15 sand) over freshly applied polymer cement slurry including keeping upto 8 to 10 mm short of outer surfaces and scarifying the exposed surface formechanical bonding of polymer modified mortar as per specification complete including scaffolding curing etc. (IPTS MC 76 /Indobond AC).

Providing & applying base coat of Epoxy polymide gel coat of (1:0.8) proporation Resin To Hardner) including surface cleaning by wire brush & removing dirt, over existing concrete or acrylic polymer modified plastered surface, including all labour, scaffolding if necessary et

Providing and applying 100% Solids polyurethane coating over the Primer coat of polymide gel purethane at top coat nominal thickness as per specification using plural components with suitable application method and required equipment coating to be certified for food graded PU as per CFTRI or equivalent standard (Rate excluding GST

Providing ,laying, jointing SS 304 pipes including specials, cost of material required for its jointing ,all taxes,duties octroi, loading, unloading, transportation,all labour, material,machining, grinding, rolling, welding, testing etc. complete.

Providing and supplying at site of spheroidal ductile iron / graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated approved (approved EPDM for WRAS rubber drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST leviedbyGOI&GOMinall respectetc.complete.(ForPN 10 & 16) (7) 300 mm.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) (a) Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves (9) 300 mm.

Manufacturing, providing and supplying spirally welded / ERW/ SAW /fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible). (c) Dia of Pipe : 300.00 mm (I. D. ) Thickness of pipe : (6) 10.00mm.

Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification. (vi) 10 mm.

Providing, erecting & Commissioning of Electric Motorized Valve Actuator for non rising Spindle type sluice valve, Butterfly Valve, Sluice Gate of PN 1 to Pn-1.6 rating With integral starters, operrating panel,Cable,Cable Tray. Including all material & Labour ete Completed

Supplying, erecting, testing & commissioning of twin lobo type rotary Air blower having capacity 650 Cum/hr ,Pressure rating 0.4 kg/cm2 with suitable motor erected on a common frame with proper coupling and electric control panel required cable, as per detailed specification & erected on base frame & embedded in provided CC foundation including All Material,Labour,Trial & testing etc. completed.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating,hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Supplying,installing and giving trial test for HRSCC MECHANISM for New Proposel Recycies Sedimentation Tank Size-6 Mtr.DIAx 4.5 Mtr.SWD,FLOW=84 cum/hr. As per approved design and drawing including all civil mechanical & electric work required material,Labour etc. completed Job

Providing ,Installation & Commissioning of Submersible Feed Pump for Waste water conveying System for Recycal Unit Suitable ( Medium Temperature 20 to 35 oC.). Discharge flow 84 m3/hr,Discharge head 6 to 8 m range as per site Condition, Pump MoC Housing:Cast Iron;Impeller: Cast Iron , Type of impeller Open impeller , Solids size less than 80 mm , Quick discharge coupling, cable holder, guide rail chain, lifting and fixing accessories , Motor:Rated Voltage 415 V Frequency 50 Hz Rating 80 kW* Time Duty Continuous Nos. Of poles 4 , IP67.including required all material i.e electric cable, control panel for operation NRV , required foundation trial testing etc complete job.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filling, ramming,watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum, watering, ramming, etc. complete. (Lift upto 1.5m) By Mechanical Means

Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary formwork, compacting, curing, bailing out water manually in tidal range etc. complete

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for plain or molded sills, cornice, jambs, block in course, or architraves of required size and shapes including steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided,finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete,With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying /pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer )

Supplying, erecting & commisioning work for Sludge dewatering centrifuge System for Recycal Unit, MOC of wet part-SS 304, MOC of casting/ housing -CSEP, Solide and liquid Chutes- MSEP along with 18.50 KW centrifugal Motor & enclosed control panel suitable feeding pump for 15 m3/hr max. including all Civil,electric & mechanical work

Daily Operation for 48 MLD WTP including required Dosing chemicals & manpower for 1 year period after completion of expansion work .

SHARDA INFRATECH (BID ID -7059472)