Supply and Installation of Laboratory Furniture along with associated Civil/Interior, Electrical, and IT Jobs for Proposed Infrastructure development for the Laboratory in Siliguri Regional Office -Cum -Lab Complex of WBPCB at Paribahan Nagar

Amount

CIVIL WORKS

Dismantling all of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. a) Upto 150 mm thick

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. LS – 50 sq.m.

Removal of rubbish, earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge LS - 10 cu.m.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, as per relevant IS codes. at Pakur Variety LS – 2 cu.m.

Supply of Mazdoor (Male)

Providing & fixing 10 mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge. 1) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)

125 mm thick brick work with 1st class bricks in cement mortar (1:3) in the ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary [Excluding cost of chipping over concrete surface] (i) With 1 : 6 cement mortar (a) 20 mm thick plaster

Dressed wood work in post, plate, battens etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected up to three decimals) Sal : Malayasian

Rendering the surface of walls and ceiling with white cement-based wall putty of approved make and brand (1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. (Two Coats)

Applying Acrylic Emulsion paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of superintending Engineer : ( Two Coats)

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (a) On timber or plastered surface: i) Two coats (with any shade except white)

b) On steel or other metal surface: ii) Two coats (with any shade except white)

Supplying, fitting and fixing boiling water-resistant ply conforming to IS:303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-charge. excluding the cost of supporting frame work and teak wood batten/Lipping1 In Ground Floor (i) 9 mm

Supplying, fitting and fixing decorative lamination conforming to IS:2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on particle/MDF/Ply Boards with recommended/ approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in-charge. The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. (i) Thickness of laminate 1 mm i . 2 x 52.7 x 3 – 316.20 sq.m. (For partition) ii. 9 x 2.1 X 1.2 = 22.68 sq.m. (for Door)

Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 4 mm thick

Supplying, heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS:6315 or any approved make as per direction of Engineer-in-charge.

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete..

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (a) Heavy type (I.S.I. size 3)

Door stopper (Brass)

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to IS : 2202 timber frame consisting of top and bottom rail and side styles of well-seasoned timber 65 mm wide each and the entire frame fitted with 27.5 mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings: (a) 35 mm thick shutters (single leaf)

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S. clamps. (The quantum should be corretedupto three decimals). Sal : Malayasian

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (Add Extra 30% for Oxidised Fittings.) 100 mm x 75 mm x 3.5 mm

Aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to IS 204/74 fitted and fixed with cadmium plated 300 mm long x 12 mm din bolt

Scantling upto 50 mm wide and 12 mm thick (chamfering or rounding) for ceiling/partition battens including fitting, fixing in position with washers, coach screws etc. complete : (a) Ordinary teak 50 m

Anti-termite treatment to the junction of wood work and masonry walls with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying at the points of contact with the adjoining masonry by drilling 6m. dia holes at a downward angle of about 45 degree at the junction of woodwork and masonry and squirting chemical emulsion into these holes at the rate of half litre per hole. The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. The shutters are to be sprayed with emulsion. on both sides. All wooden fixtures like almirahs, racks etc. are also to be thoroughly sprayed with chemical emulsion. (Payment will be made on the basis of outside measurements of doors and windows).

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials. Payment for painting will be made separately) (a) For Exposed Work PVC Pipes 15 mm

(b) For Exposed Work PVC Pipes 25 mm

(c) For Exposed Work PVC Pipes 50 mm

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. a) 75 mm Dia

b) 110 mm Dia

B) UPVC Fittings: a) Plain Tee

(i) 75 mm. Dia.

(ii) 110 mm Dia

b) Plain Y (i) 75 mm. Dia.

(ii) 110 mm. Dia.

c) Bend 87.5 degree (i) 75 mm. Dia.

(ii) 110 mm. Dia.

d) Shoe (i) 75 mm. Dia.

(ii) 110 mm Dia

(Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand).

Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 50 mm Dia

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 40mm Dia

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 32 mm Dia

FURNITURE AND INTERIOR WORK

Office Chair Overall height: 960±10 mm, overall depth/width = 760±10 mm Made of 15mm thick hot pressed commercial plywood (IS 303: 1951) padded with high resilience polyurethane foam (30+25) mm thick having density (40 & 32)kg/m³ Back made of (15+6) mm thick double layered moulded plywood (IS 303: 1951) padded with high resilience polyurethane foam 30mm thick having density 32kg/m³. The seat and back with leatherite tapestry 1mm thick and 571 GSM. PVC arm with cushion having leatherite covering top and MS powder coated steel Knee tilt 360-degree revolving mechanism having tilt tension adjustment The pneumatic seat height adjustment up to 65mm with standard class-3 gas-lift The Pedestal should have five legged made of MS CRCA Powder coated having pitch circle dia. 640 mm The seat size: 515±10 mm (D) X 545±10 mm(W) and back size shall be 580±10 mm(W) X 490±10 mm(H) from seat. Overall height: 960±10 mm, overall depth/width = 760±10 mm.

Steel Storage Cabinet 900X375X1950(WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and double leaf door.

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

Visitor chair seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 520±10 mm(H) from seat & overall height = 960±10 mm. Made of 15mm thick hot pressed commercial plywood (IS 303: 1951) padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back with fabric tapestry 1mm thick and 300 GSM. 50-60µ thick powder coated HR steel spine and the armrest The pneumatic seat height adjustment up to 65mm with standard class-3 gas-lift The pedestal with five-legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 520±10 mm(H) from seat & overall height = 800±10 mm.

Steel Storage Cabinet 900X375X1950(WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and double leaf door.

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

Glass Door Book Shelf 900X375X1950(WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

Steel Storage Cabinet 900X375X1950(WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and double leaf door.

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door

Office Table 1200X600X750(LXDXH) Made up of Plyboard 18mm, will be constructed onsite, with self closure hinges, Lock and handle along with 1mm PVC edge bend, All the fitting should be of reputed make, fitting screw should be fixed on PVC dowel to prevent looseness and repeat use, must be supplied with One removable partition slab, Power facility for running PC/Printer/Laptop/Mobile application. one side of table must consist of 3 Drawer 450mm

Steel Storage Cabinet 900X375X1950(WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability.The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

Steel Rack 900X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option Steel Rack 900X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option Steel Rack 900X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option Steel Rack 900X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option Steel Rack 900X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option

CRC wall facing workbench wet lab (3 storage) Modular Wall Facing Workbench with 3 base cabinet ( 1 drawer 2 shutter 2 nos. + 2 shutter unit 1 no ) with 1 sink & tap and 2 electrical raceway consisting of 1 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 1 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom one Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-4200mm W*750 mm D*900 mm H

CRC island workbench wet lab (4 storage) Modular island Workbench with 4 base cabinet ( 1 Drawer & 2 Shutter 4 nos ) , with 2 sink & tap, and 2 Double tier Reagent Rack & electrical switches and sockets with granite top . (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top: 18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 2 PP sink and 3 way swan neck CPVC/ Brass tap Material of Construction for Work Bench: 18-20G thick CRC Sheet. Interior & Exterior will be provided with powder-coated finish. Under Bench Cupboards will be provided with Top Drawer and Bottom Two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided. (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-3600mm W*1500 mm D*900 mm H Reagent Rack Dimension-1200 mm W *300 mm D*620 mm H Storage Dimension-600 mm W* 520 mm D

Steel Rack 900X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability.The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

CRC wall facing workbench dry lab ( 3 storage) Modular Wall Facing Workbench with 3 base cabinets(1 Drawer 2 shutters 3 nos.) with 2 electrical raceway consisting of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant Material of Construction for Work Bench:18-20G thick CRC Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom Two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-4200mm W*750 mm D*900 mm H Storage Dimension-600 mm W* 520 mm D

Modular Wall Facing Workbench Modular Wall Facing Workbench with 5 base cabinet ( 1 drawer 2 shutter 4 nos. + corner unit 1 no) with 1 sink & tap and 3 electrical raceway consisting of 1 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 1 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRC Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom Two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension- 4125 +900+900+1725 mm W*750 mm D*900 mm H

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

CRC wall facing workbench Modular Wall Facing Workbench with 6 base cabinet ( 1 drawer 2 shutter 3 nos. + 2 shutter - 2no + corner unit -1 no) with 3 sink & tap and 4 electrical raceway consisting of 1 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 3 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom two Shutter with one Horizontal Partition. with 2 shutter under sink with corner unit All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension 5325+900+900+1700mm W*750 mm D*900 mm H

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

Modular island Workbench Modular island Workbench with 4 base cabinet ( 1 Drawer & 2 Shutter 4 nos ) , 2 Double tier Reagent Rack & electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top: 18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant Material of Construction for Work Bench: 18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish. Under Bench Cupboards will be provided with Top Drawer and Bottom Two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided. (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-3600mm W*1500 mm D*900 mm H Reagent Rack Dimension-1200 mm W *300 mm D*620 mm H Storage Dimension-600 mm W* 520 mm D

CRC wall facing workbench wet lab (3 storage) Modular Wall Facing Workbench with 3 base cabinet ( 1 drawer 2 shutter 2nos. + ) with 1 sink & tap and 3 electrical raceway consisting of 2 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 1 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRC Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom one Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-4200mm W*750 mm D*900 mm H

Steel Rack 900X300X1800 (WXDXH)\ MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

Modular Wall Facing Workbench Modular Wall Facing Workbench with 5 base cabinet ( 1 drawer 2 shutter 3 nos + corner unit 2 no .) with 2 sink & tap and 4 electrical raceway consisting of 1 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 2 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom Two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-1600+900+900+2275+900+900+1800 W*750 mm D*900 mm H

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

Anti Vibration Table Modular Anti vibrating Table with 2 Layer granite top to reduce vibration Table top:18 +/- 1 mm thick well-polished Jet Black Granite with full round nosing, acid-resistant, alkali-resistant Material of Construction for Work Bench:18-20G thick CRC Sheet. Interior & Exterior will be provided with powder-coated finish. Table Dimension-750mm W*750 mm D*900 mm H

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

CRC wall facing workbench Modular Wall Facing Workbench with 8 base cabinet ( 1 drawer 2 shutter 6nos. + corner unit 2 no) with 2 sink & tap and 6 no electrical raceway consisting of 1 nos of 16/6 Amp electrical switches and sockets with granite top. (MCB Socket Make : Havells/Anchor / North-West / Norysis) Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 2 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRC Sheet. Interior & Exterior will be provided with powder-coated finish.(40-60Microns) Under Bench Cupboards will be provided with Top Drawer and Bottom two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-3200 + 900 +900+3730+900+900+3000 mm W*750 mm D*900 mm H

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

Anti Vibration Table Modular Anti vibrating Table with 2 Layer granite top to reduce vibration Table top:18 +/- 1 mm thick well-polished Jet Black Granite with full round nosing, acid-resistant, alkali-resistant Material of Construction for Work Bench:18-20G thick CRCA Sheet. Interior & Exterior will be provided with powder-coated finish. Table Dimension-750mm W*750 mm D*900 mm H

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

Overhead wall mounted storage cabinet 600X375X600 (WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

CRC wall facing workbench wet lab (3 storage) Modular Wall Facing Workbench with 3 base cabinet ( 2 shutter 2 nos + corner unit - 1 no .) with 1 sink & tap Table top:18 +/- 1 mm thick well-polished Jet Black Granite with half round nosing, acid-resistant, alkali-resistant with 1 PP Sink & 3 way swan neck CPVC & Brass Faucet. Material of Construction for Work Bench:18-20G thick CRC Sheet. Interior & Exterior will be provided with powdercoated finish.(40-60Microns) Under Bench Cupboards will be provided with Two Shutter with one Horizontal Partition. All necessary hardware fitting like Heavy Duty Drawer Channels for smooth rolling to be provided (Hardware Make : Ebco / Hettich / Godrej) Table Dimension-900 + 900+900+900mm W*750 mm D*900 mm H

Fabrication & fixing of Aluminium Partition

Overhead wall mounted storage cabinet 600X375X600(WXDXH) MOC: 20SWG CRCA/ Sheet with PU Powder Coating, Supported with Lock, Handle D type of 100mm, self closing hinges with soft close, and glass glazed view door.

Steel Rack 800X300X1800 (WXDXH) MOC: 20SWG CRCA Sheet with PU Powder Coating Overall load capacity: approx. 120kg, load capacity per shelf: approx. 30kg. 06 Nos Steel shelves Supported with 4 Slotted channel with height adjustment option

Stool Features a high-back design that offers superior lumbar support and adjustable height to fit any work surface. The durable steel frame is strong and sturdy, with a powder-coated finish that resists scratches and damage. The five-legged base ensures stability. The upholstered seat is comfortable and easy to clean, Mounted on 5 Cm swivel castors Size: 19x19x22 Inches

ELECTRICAL AND IT WORK

Maintenance free Chemical Earthing with dual pipe flat Technology, 80mm dia, 3 meter long with chemical Compound. Model:G803

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necy. connection as required 4 x 126/0.4 (16 sqmm) + 2 x 80/0.4 (10 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necy. connection as required 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necy. connection as required 2 x 36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the pre-laid polythene pipe and by the pre-laid GI fish wire and making necy. connection as required 2 x 56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FRLS' (Brand approved by EIC) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed: Average run 6 mtr

Supplying and fixing vertical run with 25 x 6 mm GI flat on wall etc proper saddles not exceeding 2'-0" (0.6 mtr) apart including making bolted connections with air terminals etc including mending good damages (inclusive of hiring charges of scaffolding).

Supplying and fixing 25 x 6 mm GI flat from earth installation to test point partly 30 cm below ground level and partly above ground on wall including supplying and fixing 40 mm bore GI protection pipe (Class-B) filled with compound and making connection at terminal ends with nuts, bolts and washers etc and mending good the damages.

Servicing of Main LT Panel, Sub Main Panel, J.B, Main Switch, LDB & PDB Including Supplying of all sundry materials as and when required as per approved practice.

Supply and installation of new EPABX Telephone System with the following specifications. i) EPABX 06 Trunk Lines/ 16 Extensions Lines, Expandable up to 24 Lines ii) Auto Redial.iii) Computer connectivity. iv) Restriction of outgoing calls. Make:- Accord/Matrix or Similar reputed make

Supply and installation of single line Telephone.Make: Beetle/ BPL/ Panasonic.

supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in pre laid PVC rigid conduit/ in polythene pipe embedded in wall.

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Supplying and making end connection in existing and possible enhance network system including supplying ferules, junction boxes, tapes as required as per approved practice.

Supply and installation of maintenance-free compatible SMF Battery for three (three) hours of Backup Power During Power failure. N.B: Battery Voltage Should Be Maintain as per Manufacturer Recomendation. Make; Amco/EXIDE/Amaron

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works : 6 Modules

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works : 8 Modules

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switchboard and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capacity 10kA (C- Curve) in SS enclosure fixed on the wall and cecessary conection.

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Legrand Up to 160A 8 way Enclosure (607914)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A SP MCB

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Legrand 160 A

Painting of existing 7.5 mtrs long steel tubular pole as per 410-SP-9 conforming to IS:2713/1980 Having the dimension(bottom 13907mm ODX5.40 THICKX4.5MTRS LONG, MIDDLE 114.3mm OD X3.65mm thick x1.5mtr long ) with 1.2mtr long 40mm dia projected bracket etc.

Supplying & Laying of 1.1KV Grade PVC insulated armored aluminum conductor cable of the following sizes through the existing trench, excavation of soil with brick protection as per approved practice( TPN DB to pole and pole to pole etc.) 4C x 6 Sq mm PVC/Ar./AL Cable

Supplying & Laying of 1.1KV Grade PVC insulated armored aluminum conductor cable of the following sizes through the existing trench, excavation of soil with brick protection as per approved practice( TPN DB to pole and pole to pole etc.) 3C x 6 sq mm PVC/Ar./AL Cable

Supplying & Laying of 1.1KV Grade PVC insulated armored aluminum conductor cable of the following sizes through the existing trench, excavation of soil with brick protection as per approved practice( TPN DB to pole and pole to pole etc.) 2C x 6sqmm PVC/Ar./AL Cable

End connection including supplying and fixing compression type cadmium nickel-plated cable gland and finishing the cable ends of following cables by crimping with cable socket including supplying cable sockets, tapes etc all jointing materials and making connections including earthing as per approved practice. 4C x 6sq mm PVC/Ar./AL Cable

End connection including supplying and fixing compression type cadmimum nickel plated cable gland and finishing the cable ends of following cables by crimping with cable socket including supplying cable sockets, tapes etc all jointing materials and making connections including earthing as per approved practice. 3Cx6sqmm PVC/Ar./AL Cable

End connection including supplying and fixing compression type cadmimum nickel plated cable gland and finishing the cable ends of following cables by crimping with cable socket including supplying cable sockets, tapes etc all jointing materials and making connections including earthing as per approved practice. 2Cx6sqmm PVC/Ar./AL Cable

PARYAVARAN TECHNOLOGIES (BID ID -5802843)

Orientallabs Retail Services Private LImited (BID ID -5792060)