32/2025-26

Amount

Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work.

PCC Pole /STP Pole 8.5/11/13 Mtr long

11kv Pin Insulator .

11kv Disc Insulator .

11kv X-ARM

MS Earthing Rod

Transformer 25/63/100 KVA

ABC Cable 3x50SQ. MM.

ABC Cable 3x95 SQ. MM.

ABC Cable 3x120 SQ. MM.

ABC Cable 1x25+1x16 SQ. MM.

11 KV XLPE Cable 3x70++3x120+3x185 sqmm

ACSR Weasal Conductor

LT D.B. Box

11 KV CT/PT Unit

11 KV Metering Cubical/pilfer

Stay Set Complete

Other Line Material

Dragging of pole from JE Dump Store to site

Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc.

Stringing and sagging of 11 KV line with ACSR Weasal Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department)

Pipe Earthing ( Boring type 40 Feet)

Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor)

Mounting of 25/63/100 KVA Tranformer

Installation of fixing 11 KV CT/PT with required meterial.

Installation of fixing 11 KV Pilfer Unit with required meterial.

Errection of Substation type double pole with PCC /STP 8.5/11/13 Pole Mtr. Long . including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt, fitting of 33/11 KV pin & Pin insulator.

Errection of single PCC /ST Pole for Stringing, jumpharing and sagging of conductor 1/6 of total length of poles

Stringing and Sagging of LT 1x16 ABC Cable (LT ABC Cable will be provided by the department)

Stringing and Sagging of LT 3x50 ABC Cable (LT ABC Cable will be provided by the department)

Stringing and Sagging of LT 3x95ABC Cable (LT ABC Cable will be provided by the department)

Stringing and Sagging of LT 3x120ABC Cable (LT ABC Cable will be provided by the department)

Installation of D.B. Box

Earthing of pole with MS Earthing.

Provinding & Fixing of various type materials. All materials shall be supplied by the contractor.

Nut & Bolt

PG CLAMP

F-Clamp

Clamp for Top/ Dropper and T-off2/Stay/LT etc.

GI Pipe 3"&4'' DIA

L T Insulator

SMC box (Fuse Set)

TPMO SET

Looping and Choopping of tree branches in laying on the route of line.

Laying of 11kv XLPE Cable 3x70, 120,185 Sq. By MM Manually

felling and heat treatment of cable box

Concreating and pilinthing of ST& PCC Pole 18x24 CM.

Construction of masonry type transformer plinth of sutable size 1.5×1.5×1.5 M with brick, cement, Coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. MS Channel of size 100×50×200 mm on the top of the plinth for placement of transformer. (All the material will be arranged by the contractor)

Construction of retaining wall, fabrication & erection of Wire Mesh fencing of suitable size as per physical condition.. (All the material will be arranged by the contractor at his own cost).

Construction of LT Distribution Cum LT Protection Box in Rectangle Shape made of MS Angle of Size 50x50x6 MM, 7.5 Feet long For Installation of Henley Type Tailness Fuse Unit 300 AMP 650 Volt 3 nos Outgoing Circuits With Copper Bus Bar of size 1000x50x6 mm Including Proper Grouting of Structure by digging of pits off size 300x300x600 mm with the help of cement, coresand and aggregate in the ratio 1:3:6 and fabrication of structure complete.

Fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc.

Looping of cable and mounting of pole.

Gaurding of 11 KV Line

Dismentaling of 11 KV Line & poll

Othar line work

POOJA ENTERPRISES (BID ID -5285270)

M/S J P CONSTRACTION COMPANY (BID ID -5286018)