Completion of Yatri Niwas up to finishing level at Chilling

Amount

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2

Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P.brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)Anodised aluminium (anodised transparent ordyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.)window shutter (45x45x1.4mm)

Providing and fixing 12mm thick prelaminated particle boardflat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-l type-11) in panelling fixed in aluminium doors, windows shutters and partition frames with C. P. brass I stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorativelamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.)With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg I sqm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Budloo I Fir wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary 35 30 screws.second class Kail wood

providing and fixing of ladakhi ornamental shingchak with polishing all complete job

providing and fixing of sundried bricks laid in mud motar all complete job

providing and fixing of readymade colourfull ceiling all complete job

providing and laying of mud concrete under wooden flooring

providing and fixing of 1.5'' thick wooden plank for flooring with T&G including cost of wood and labour all complete job

Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 15 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required.

Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required

Supplying and fixing 0f 1 inch, ¾ inch pvc conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp 240 volt single pole mounted in recessed including m.s box complete as required

Supply and fixing of combined 3 pin 240 volt 10 amp. Socket outlet with safety shutter and 10 amp. 240 volt single pole mounted in recessed including complete MS box complete as required.

3 modular plate

6 modular plate

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required A) Single p[ole 6/10/20 Amp

B) Double pole 63 amp

Wiring for change over 63 amp. And installation with complete accessories and hole on the wall as required

Supply and fixing the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed / tube lightning 20 watt 3000k, round led luminaries as per Philips

Supply and fixing of following single pole and netural sheet steel MCB distribution box 240 volts on surface recess complete with tinned busbar netural link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN

M/S STANZIN GURMAT