Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹6.6 L
EMD Value
₹16,598
Closing Date
22 Oct 2026, 4:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Rural Development and Panchayat Raj Department
Shobha K
CONSTRUCTION OF A RETAINING WALL AND BUILDING REPAIR WORK OF THE GOVERNMENT AYURVEDIC DISPENSARY AT DODDAPALYA VILLAGE IN SRIRANGAPATNA TALUK
RDPR/2026-27/BD/WORK_INDENT29659
RDPR/2026-27/BD/WORK_INDENT29659
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Mandya
7 documents required · 7 mandatory
The Tenderer shall have valid Class-IV and above KPWD Licence.
Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years ie., 2021-22, 2022-23, 2023-24 2024-25 and 2025-26 Certified from Charted Accountant with compulsory UDI number Profit and Loss, balance sheet shall be enclosed
Reports on the financial standing of the tenderer such as profit and loss statements and auditors reports for the last five years
GST Registration and Returns for the year 2026-27 GSTR-3B
List of existing commitments and ongoing work
List of works for which tenders already submitted
Name and Address of Contractor for Communication
₹500
₹16,598
7 Oct 2026
7 Oct 2026
23 Oct 2026
21 Oct 2026
CONSTRUCTION OF A RETAINING WALL AND BUILDING REPAIR WORK OF THE GOVERNMENT AYURVEDIC DISPENSARY AT DODDAPALYA VILLAGE IN SRIRANGAPATNA TALUK
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Repairs to roof with available corrugated zinc sheets/ A.C.sheets with new J bolts, screws and washers etc., on existing reeper and rafters.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...
Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick inclu...
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, be...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Repairing and fixing shutters (panelled or glazed) to doors, windows,
ventilators and cupboards.
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1-GEN 2026-27_29659.docx
Tender Document • 1.17 MB
NIT_15_2026-27.pdf
Others - Tender NOTIFICATION • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .