AUGMENTATION OF TRAINING SHED AT 411 I PARA FIELD COMPANY

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soild complete all as specified and directed.

M&L for Broken Stone or boulders as Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in with CM 1:6.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:4 mixed with water proofing compound finished even and smooth complete all as specified and as directed : Note water proofing compound shall be measured separately.

M&L for Returning, filling in, including speading, leveling watering and well ramming in layers not exceeding 25 cm in soft/loose soil,Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

M&L for removing of excavated material to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 M above the starting point.

Supply only integral water proofing compound

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, kbed plates, plinth coursed parapets and like including weathering, slighly rounded or chamfered angles and throating including use and waste or necessary form work etc complete all as specified.

M&L for RCC Design mix M-25 as in Foundations, including rafts, footings, foundation beams, plinth beams bases forcolumns above GL, Roof Slab, linted all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement cut to lenth bent in shape required including cranking, bending, spirally booking ends and binding with and including mils steel lwire (annealed) not less than 0.9 mm dia or securing with clips etc.

M&L for mild steel TMT bars 6 mm to 8 mm dia and over as in reinformcement cut lto length, bent in shape required including cranking, benting, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc.

M&L form work to sides of concrete foundation, footings bases of columns, raft beams, sides and soffits of foundationa nd plinth beams and similar work vertical or to better tharough finished flat surfaces

M&L form work to soffits or suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thck (horizontal or sloping) flat rough finished surfaces

M&L form work to sides and soffits or floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilivers, shelves incL supoorts, overhangs, etc also palys between floors and beams etc

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20 mm thick screed bed in CM 1:6 complete all as directed.

S&F Steel door for size (7x3 Feet) including steel chowkhat.

S&F Steel ventilator with top hung shuttyers including hinges, steel peg stay, complete all as specified and as directed

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide (For steel door and Ventilator)

S&F 3 mm thick sheet glass ordinary quality and glazing with oild putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

M&L for preparing newly plastered surfaces of walls, Ceiling surface and applying three coats of oil bound distemper

M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M& L for Screw/Hook and other materials for fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour

M&L for water profing treatment of roof slabs all as specified below :-

(a) Preparation of roof surfaces by brushing, cleaning and M&L for applying 10 mm thick plaster in CM 1:4 with water proofing compound @ 2% by weight of cement.

(b) Applying a priming cool with bitumen primer @ 0.5 Kg/Sqm

(c) Applying a hot blown bitumen grade 85/25 @ 120 Kg/Sqm

(d) Laying polymoric water proofing membrane weighing not less than 3 Kg/Sqm. (Note WPC shall be meausred and paid separately)

M&L for concealed point wiring with 1.5 Sqmm PVC insulated and unsheathed cable copper conductor multistranded in and including PVC non metalic rigid conduit ISI marked with complete accessories including provision of PVC insulated cable of 1.5 Sqmm unsheathed copper conductor as earth wire through on the same conduit to common earth and connected to earth dolly including MS sheet terminal box of 2mm thick of required size duly painted with two coats of black bituminous paint over one coat of red oxide primer sunk type and 3 mm thck plastic laminated top cover of required size ISI marked for mounting switches, sockets, regulators etc complete all as specified for the following

(a) One light point comntrolled by one switch 5 Amp SP one way

(b) S&F Modular switchs 1 way 6 A 1 Module, Make : Havells

(c) S&F ultra slim liner LED tube light, environmental friendly 20 W, Make Havells

(d) S&F Ceiling rose Make : Havels

(e) S&F 5 Amp S/S Make : Havels

(f) S&F 15 Amp S/S Make : Havels

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuild loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardeant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar, 4 way double door open able complete all as spcified and directed.

S&F MCB single pole 240 volts any rating from 6 to 32 Ampswith rupturing capacity 10 KA 'C'

Supply and fix in replacement MCB Single pole and neutral 240 volts any rating from 6 to 32 Amp with rupturing capacity 10 KA 'C' seris including providing thimble for out goind cables. Make : Cat pt No 4086 14 of Legrand lor equivalent in Schneider (Acti-9)/L&T.Hanger.

S&F Lamp holder/single holder insulated body with black/white plate for batten fittings complete all as specified and directed

MNR ASSOCIATES

Attar Singh and Sons