Tender for the work of providing & erection of 50mmx50mmx6mm razor blade fencing on compound wall protecting 1st, 2nd & 3rd stage pumping station in Tataguni coming under the jurisdiction of AEE(K-O&M)-2-2

Name of the Work: Tender for the the work of Providing & erection of 50mm x 50mm x 6mm razor blade fencing on compound wall protecting 1st, 2nd and 3rd stage Pumping Station in Tataguni coming under the jurisdiction of AEE(K-O&M)-2-2.

Sl. No Specification Unit Qty Unit rates to be quoted

In figures In words

1 Fabricate the new Y angle frame by using 50mm x 50mm x 6mm with proper degree of inclination by maintaining the minimum 50cm width between two 50*50*6mm angles at the top and weld these angles to the existing metal poles at an Intervals of 2m. Make the holes and rectangle gap for barbed wire attachment on both sides of the Y angle. Run the barbed wire on both sides of the angles along the bank of canal and fix properly by using binding wire or by welding. Supply and Erect the 7 lanes x 75 meter length of razor blade roll fencing between the angles of size 2 feet width in round shape and bind the fencing properly by using binding wire. After completion of fixing and erection of barbed wire fencing & razor blade fencing, apply the anti-corrosive enamel paint on the base coat of red oxide paint. This work includes all required tools, machines, power, labour charges, GST and all taxes. Also it includes all neccessary safety precautions during the execution of the above said work. Rmt 2038

The rates are Exclusive of GST

Terms and Conditions:

1 All the works should be carried out as per KTPP Act and as per specification and as directed by the Engineer- in-charge.

2 Rates quoted above are including clearance of the site (prior to commencement of work and its completion) in all conditions of site, moisture, weather, monsoon etc.

3 The Board reserves the right to bifurcate the work and entrust if warranted and if found expedient and advantageous to the Board of lowest approved rates.

4 The BWSSB reserves the right to accept or reject any OR all of the tenders without assigning any reason.

5 The firm should have requisite manpower/machineries at their disposal to complete the work within the stipulated period.

6 Rates quoted should be inclusive of all taxes, insurance and freight charges and any other charges and Excluding GST

7 Rates should be quoted by the contractor/firm on Item war basis both in figures and in words.

8 The firm has to upload Turn Over Certificate which is counter signed by Chartered Accountent.

9 The payment will be made after completion of work.

10 The firm has to upload "Form of tender" in the standard format or otherwise, the tender will be liable for rejection.