REPAIR AND REPLACEMENT OF ROOF SHEETS, WINDOWS, DOORS AND OTHER CONNECTED WORKS IN NORTH AND MUTGA CAMP UNDER GE(AF) SAMBRA

Amount

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off. shutters from the frames) including hold fasts from wall and making good the disturbed portion in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5Sqm each but not exceeding 4Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good the disturbed portion in cement mortar 1:4 complete all as specified and directed.

Taking down shutter of any description and material exceding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

Supply, hoisting and fixing of double layer, ISI marked, 500 Litre rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position all as specified in SSR Part I including PTMT 25mm bore ball valve high pressure with epoxy coated aluminium rod and high density plastic ball including dismantling exisiting water tank of any type and any capacity complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (below or above ground level) including removal of debris out of MD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal of debris out of MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) of any thickness and in any position and rubbish off the premises complete all as specified and directed.

M&L for providing and laying plain cement concrete (1:2:4), type B-1 (using 20mm nominal size crushed and graded stone aggregates) for in mud stops, roof kerbs, rounded or chamfered or similar items finished fair and even including necessary form work complete all as specified and directed.

M&L for providing and laying cement concrete, 25mm thick, (1:2:4), type B-0 (using 12.5mm nominal size crushed and graded stone aggregates) for levelling/to receive screed for laying floor finish, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:6 over walls surface of any description and material, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 over walls surface of any description and material, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3 over ceiling surface of any description and material, finished even & smooth without using extra cement including taking down of existing plaster complete all as specified and directed.

M&L for 20mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

M&L for 20mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(risers), jambs, pillars, dado/skirting and like laid over cement screed bedded with 15mm thick cement mortar (1:4) and jointed with grey cement slurry including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

M&L for full round and polished moulding (as per main stone polish) to edges of stone slabs upto 20mm thick, such as in window cill, jambs, counters, steps etc. and of other similar situations complete all as specified and directed.

S&F window guard bars, hold fasts of plain/square conforming to Fe-290, Gde E-165 and fixed in walls of any description including bed blocks cutting, angle iron/flat iron frame of appd design and similar articles fixed with fastners over wall surface complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described duly filled the voids with enamel based putty and applying two coats synthetic enamel paint over a coat of red oxide Zinc chromate primer complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 Kg per Sqm without leaving the pores/voids in the surface over primed or APP membrane surface including cleaning the surfaces & taking down existing water proofing treatment complete all as specified and directed.

M&L for applying bitumen based primer for use in waterproofing and damp-proofing treatments applied @ 0.30 litre per Sqm in two coats over concrete/plastered surface including cleaning the surface complete all as specified and directed.

M&L for providing and laying APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) forced application with the fire torch complete all as specified and directed.

M&L for preparation of bituminuous surface of any description and applying two coats of Aluminium paint complete all as specified and directed.

Supplying and laying of 20mm bore nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and making good the disturbed portion to match with the exisiting surfaces complete all as specified and directed.

Supplying and laying of 25mm bore nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and making good the disturbed portion to match with the exisiting surfaces complete all as specified and directed.

S&F in repairs 25mm nominal bore dia CPVC, globe or gate valves, connected with pipe with solvent of any material complete all as specified & directed.

M&L for applying two coats of oil bound distemper over a coat of primer and 2mm thick wall care putty in two coats on walls, pillasters, cornices, etc., on newly plastered surfaces using spunge roller complete all as specified and directed.

M&L for three coats of white wash on newly plasterd ceiling surfaces including necessary filling of voids with wall care putty complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm² , modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm² , modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

S&F floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece complete all as specified and directed.

S&F 125mm long cast type anodised aluminium handle complete all as specified and directed.

S&F150mm long cast type anodised aluminium handle complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid one side decorated and other side plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified & directed.

S&F to chowkats 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.

S&F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick dark black tint plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20798 or equivalent make as specified in list of makes of Particular Specifications (b) Main Frame top & sides section : Jindal section No 20678 or equivalent make as specified in list of makes of Particular Specifications (c) Sliding shutter section (handle ) : Jindal section No 20707 or equivalent make as specified in list of makes of Particular Specifications (d) Sliding shutter section for top & bottom : Jindal section No 20842 or equivalent make as specified in list of makes of Particular Specifications (e) Sliding shutter section for interlock : Jindal section No 21091 or equivalent make as specified in list of makes of Particular Specifications

M&L for providing and fixing factory made uPVC colour Sliding window Three track, area of each window not exceeded 2 Sqm, made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (90mm x 42.5mm), sliding sash (54mm x 32mm). Sliding mesh Sash (54mm x 32mm) Sliding interlock (One vertical length in each shutters) (30mm x 35.50mm), Glazing bead (22mm x 14.5mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (18mm x 10mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. The rates includes fiber mesh and 4mm thick frosted toughned glass.. Note: The unit rate quoted by contractor includes all other connected accessories. Net Opening will be measured lor payment purpose.

M & L for joint less/edge cutted glazed/matt finish light/dark shade double charged Vitrified tiles 7 to 9mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, set and jointed in neat cement slury over cement screed bed or bedding layer15mm thick in CM (1:4) complete all as specified and directed.

M & L for joint less/edge cutted glazed/matt finish light/dark shade double charged Vitrified tiles 7 to 9mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, over and incl 10mm thick plastering in cement mortar 1:4 complete all as specified and directed. Note:- Those tiles fixed right angled to each other the each tile should be chamfered/trim at 45 degrees at joint/corner /edge, the quoted rates are inclusive of this.

S & F prepainted galvalume Aluminium Zinc coating GI based trapezoidal profile steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, ridge etc., fixed with L-type or J type or cranked hook bolts or self tapping screws including dismantling old exsiting sheets of any type and any thickness complete as specified and directed.

S & F Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, or as in ridges etc. fixed with L-type or J type or cranked hook bolts or self tapping screws including dismantling old exsiting sheets of any type and any thickness complete as specified and directed.

M&L for Rolled/hollow tube mild steel of any type/size/sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165) including dismantling old existing rusted mild steel sections complete as specified and directed.

M & L for Rolled/hollow tube mild steel of any type/size/sections as in roof trusses (framed) of Fe 290 (Gde E-165) including dismantling old existing rusted mild steel sections complete as specified and directed.

M & L for compound girders and stanchions, steel columns, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more as beam or channel sections or angles with plates, hollow sections, including all lattice bars, stiffeners, gusset plates, etc. using Fe 290 (Gde E-165) including dismantling old existing rusted mild steel sections complete as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in coping, drain channel, benching of manhole, bed plates or similar works including necessary form work and demolition of existing PCC complete as specified and directed.

AARADHYA ENTERPRISES (BID ID -3469199)

RUDRAYYA I GHANTIMATH (BID ID -3474590)

RAJENDRA KRISHNA SARAF (BID ID -3474636)

M/S ADITYA CONSTRUCTIONS (BID ID -3465264)