Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC VILL PO KUMARHATTI DIST SOLAN HP | SOLAN | SOLAN | HIMACHAL PRADESH | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹41.3 L+₹1.5 L (3.69%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹42.0 L+₹2.1 L (5.26%)Rejected-AOC 217 ARHAT BAZAR KASAULI DISTT SOLAN HP 173204 | SOLAN | HIMACHAL PRADESH | 173204 | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹43.8 L+₹3.9 L (9.84%)Rejected-AOC | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹44.3 L+₹4.4 L (11.1%)Rejected-AOC | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
4 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Meena, IDSE, EE, Garrison Engineer
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
COMPREHENSIVE MAINT OF OTM ACCN AT MIL STN KASAULI UNDER GE KASAULI
2023_MES_584845_1
GEK-100/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
KASAULI UNDER GE KASAULI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹96,000
Yes
24 Apr 2023
7 Mar 2023
12 Apr 2023
7 Mar 2023
4 Apr 2023
21 Mar 2023
Amount
Schedule 'A' Section - I
S&F pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified, including Dismentling Plain or corrugated steel sheeting, any gauge,thickness and any pattern.
Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws as specified , including Dismentling Plain steel sheeting, any gauge,thickness and any pattern.
S&F for Fibre glass 2mm thick reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc. complete all as specified and directed, including Dismentling corrugated steel sheeting, any gauge,thickness and any pattern.
Dismantling timber scantlings in unframed works 40sq. cm and over in section, in any position.
M&L for rolled mild steel section Fe 410-W (Gde E- 250) quality A as in roof trusses (framed), trusses, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats gusset plate etc.
Steel work in tubular trusses ,purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.
M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed, including Demolition of Brickwork or stone/ boulder masonry, built in cement mortar.
ditto as above item No. 7.00 but except stone , including Demolition of Brickwork or stone/ boulder masonry, built in cement mortar.
M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 , including Demolition of Brickwork or stone/ boulder masonry, built in cement mortar.
S & F coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified, including dismantling existing wall tiling including cement mortar bedding (but not backing).
M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed, including dismantling floor tiling including cement mortar bedding (but not backing).
M&L Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed, including dismantling floor tiling including cement mortar bedding (but not backing).
Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed, including, dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).
M & L Coloured Prepolished chequered cement conc tiles (30cmx30cmx25mm thick) in white cement and pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified, including dismantling floor tiling including cement mortar bedding (but not backing).
Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.
M&L PCC 75mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring all as specified and directed.
M&L 75 mm thick Plain Cement Concrete (1:3:6) type C-2 using 40 mm graded stone aggregate laid in panels in plinth protection, even & fair surfaces without using extra cement all as specified.
Demolition of Reinforcement Cement concrete of any description and in any position not otherwise specifically provided for in landing and shelves etc complete all as specified.
Material and Labour for providing Reinforced cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, Beams, cantilevers, bressummers, all as specified. Note : (Reinforce bar paid and measured separately)
Providing pre cast cement concrete type B1 1:2:4(20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. , with plain fair faces, including hamfers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match all as specified .
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, for rough finished surface of concrete.
M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed .
M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed, including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for two coat cement plaster (up to 12m height including necessary scaffolding) ,on brick/concrete surace of wall first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement. (WPC will be paid seperately under respective item) , including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Supply only WPC complete all as specified and as directed .
Material and Labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified , including Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for preparation of plastered or unplastered new surfaces of walls of and applying two coat of cement base paint over a coat of cement priming coat of any approved tint complete all as specified & as directed.
M&L preparation of new surface applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer.
Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.
Taking down shutter of any description, exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified.
Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified.
Taking down shutter of any description n. exc 1.0 sq.m each complete all as specified.
Taking down and refixing in same location after making nessary repair and make the shutter fit for use, shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed .
Supplied and Fixed IInd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
Supply and Fixing 35mm thick, 2nd class HW, Plain framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed .
Supply and Fixing IInd Class HW 35mm thick, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified.
Supply and Fixing 30mm thick 2nd class hardwood, factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (b) complete all as specified and as directed .
S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded premale PVC sheet on the front face & 4mm thick prelam PVC sheet on back face, centre core will be PVC battern supplying & fixing in frame at site complete all as specified and directed by Engineer-in-Charge.
Anodised aluminium frame powder coated(50micron) for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S & F anodised aluminium powder coating of any colour (thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges anodised aluminum snap beading screws etc, complete all as specified. (Note : S&F of Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately under this Sch).
S & F anodised aluminium powder coated (thickness of powder coating not less than 50 micron) three track sliding window/Cupboard frame of size 45.2 x 35 x 1.3mm and window/Cupboard shutter of size 37.5 x 15 x 1.6mm with one or more rebates including joining cleat for fixing and self locking devices of approved quality in each shutter, handles etc complete all as specified and directed. (Note: quoted rate deemed to be included for self locking devices).
S&F anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately).
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified.
S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
S&F in repair Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed
Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.
M&L for 9mm thick Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination ,fixed with aluminium frame work.
S&F sheet glass 5.5 mm thick glass plain sheet ordinary quality in square exc 0.5 sq. m in each pane to be fixed in aluminum frame all as specified.
S&F sheet glass 4 mm thick glass plain sheet ordinary quality to be fixed in aluminum frame all as specified.
S&F in repair 3mm Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane
S & F Mortice lock, 4 levers, brass, vertical type of size 100mm, fixed in repair all as specifieed and directed.
Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.
Supply and fixing for stainless steel butt hinge ISI Marked 75mm size complete all as specified and as directed.
Supply and Fixing 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified in IS No 204-1991 and as directed .
Supply and Fixing 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified in IS No 281-1991 and as directed .
S&F 100mm Aluminium handles, cast type, anodised, fixed complete all as specified.
Supply and Fixing 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified in IS No 452-1973 and as directed .
S & F 4 mm thick frosted on one side sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified.
S&F GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 295mm X 295 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gsm/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. The exposed metal grid comprises of Main Runners and Cross Tees, roll formed from galvanized steel of 120/180gsm zinc coating. The main and cross tees are provided with bayonet coupling for quick installation and have a height of 32 mm and 24 mm. The grid (of size 300mm x 300mm) is suspended from the roof with G.I. wire rods for quick adjustment by suspension hangers at max. 1200 mm and is filled with 1200 mm / 600 mm cross tees(24X26). Hangers are fixed to roof by expansion fasteners. Wall angle are 24 mm X 24 mm X 0.4 mm thick coil coated steel matching the colour of the tile , including demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets.
Supply and Fixing galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .
Supply and Fixing in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .
Dismantling unframed fillets, rails, posts, rafters, purlins, etc under 40 sq. cm in section complete all as specified.
M & L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 6 sq.cm and not exc 13 sq.cm complete all as specified and as directed .
M & L plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 3 sqcm and n exc 6 sq.cm complete all as specified and as directed .
S&F of 18/19 mm thick block boards / veneered particle boards, grade 1 quality, interior grade, decorative type with decorative face veneer on both faces, fixed with screws to timber frame-work, including Dismantling boarding, any description, fixed any position with nails
Material and Labour for preparing new wood surfaces of any description, not otherwise descri-bed, over 10cm in width or girth, & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified
S & F in repair of 25 mm dia curtain rods, mild steel wall thickness .80mm, powder coated with fixing metal ornamental holder and side finals(in pair for each door and window)as approved, fixing with PVC wall plugs bracket and brass screws complete all as specified.
S & F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
S & F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified
S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed .
S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S & F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed .
S & F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
M&L Cutting holes into or through walls built in stone walls built in cement mortar or cement lime mortar and walls of cement concrete.Superficial area n.exc 150 Sqcm,complete all as specified.
S&F in repair 15mm bore CP fancy type brass bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 400gms).
S&F in repair 15mm bore angle cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repairs (weight not less than 400gms).
S & F in repairs swan neck Pillar cock, CP 15mm bore cast copper alloy with chromium plated screwed both ends,fancy type, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs, complete all as specified.
S & F in repair of 15mm size PVC connections with PTMT nuts of length 450mm complete all as specified and as directed .
S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .
Disconnecting existing tanks of capacity exc. 250 & n. exc. 500 litre, and removing to store complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litre, and removing to store complete all as specified and directed.
M&L for rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.
M&L for rotational moulded polyethylene water storage tanks1000 Ltr capacity (cylinderical vertical with closed top)hoisted and fixed in position all as specified in SSR Part 1 complete all as specified & directed.
S & F 20 mm bore ball brass valves high pressure with polythene float and flynut complete screwed or iron etc complete all as specified.
Taking up or down steel water tubing and connections of 15 mm bore fixed in any position complete all as specified.
Taking up or down steel water tubing and connections of 20 mm bore fixed in any position complete all as specified.
M & L for 15mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .
Refixing15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)
M & L for 20mm bore GI tubing Medium grade with all fitting and fixed complete to walls and ceilings or laid in floors as in repair complete all as specified and directed .
M & L in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified
S & F in repair sheet glass self asembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket and guard rail.
S & F 600mmx450mm bevelled edge mirror of selcted qulaity glass, mounted on 6mm thick AC building board or commerical ply wood and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified.
S & F as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed .
S&F in repair of Mixer 15 mm dia Brass CP Wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.
S&F in repair of Mixer 15 mm dia Brass CP mixer for WHB/sink mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.
S & F in repair of 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.
S & F as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts, Plastic seat & cover complete all as specified and as directed .
S&F of Vitreous china squatting pan, "Orissa pattern" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified.
S & F as in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed .
S&F 110 mm bore PVC (SWR) vent cowl, Complete all as specified and directed.
S&F of grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gm). Complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar sitution.
S & F 30 mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised.
S&F for 10 to 12mm pre laminated HDF flooring of tongue and groove interlocking flooring system (consisting of aluminium oxidecoated tissue to make the floor surface resitant to impact ,scratches,burn etc) over 200 micron polpethelene sheet/EPE foram sheet as in floor surface complete all as specifed and directed by Engr-in-charge.
Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLSH PVC insulated, unsheathed, copper conductor cable in and incl PVC casing -n-caping of any size/dia medium grade complete with all accessories/ fittings, brass screws, washer etc and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-
One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.
One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.
One two way point controlled by two, two way switches 06 Amps complete all as specified and directed.
All as per serial item No 108.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.
All as per serial item No 108.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.
Supply & fixing switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing socket outlet 5 pin, 06 Amps flush type 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing switch piano flush type,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing of socket outlet 3 pin, 06 Amps and 3 pin16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fixing bell push flush type , 06 amps , 240 volts all as directed by Engr-in-Charge
Supply and fixing door bell ding dong type , 240 volts AC
Supply & fixing switch piano flush type, 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge.
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge.
Supply & fixing/fixing in repair LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing in repair of 9/10 W LED bulk head luminairies incl LED light with clear prismatic diffuser,driver holder connecting up with three core flexible copper conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs wall mounted decorative luminaire suitable for 1 x 9/10 LED lamp including provisson of fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.
Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 4 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : 3 (three) run measured as 1(one) run.
Ditto all as item No 124.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 6 Sqmm for earth wire. Note: 3 (three) run measured as 1(one) run.
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.
-Ditto- all as per item No 127.00, but of size 08 way SPN.
-Ditto- all as per item No 127.00 but of size 12 way SPN.
Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 20 Amps to 32 Amps 10kA and making connections complete all as specified & directed.
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.
Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole 100 Amp isolator and MCBs of cap 20 to 40 Amps as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.
Supply & fix Isolator 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and directed.
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.
Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in hard/dense soil and gating out in hard/dense soil complete all as specified and directed.
Supply / laying and fixing 50 mm bore HDPE pipe PN10 with all fittings laid in trenches for cable protection complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.
Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.
Taking down carefully unserviceable tube light/building security light/recess light/Post light fitting of any type and size and making good the disturbed surfaces/walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Supply & fixing LED tube light fitting 18/20W, (single Side Connection) including LED Rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and installed LED security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp type of capacity 35 watt complete with bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing with recess/surface/suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire which provides soft-light and glare free symmetrical illumination, including all ace ssories for fixing in fall ceiling/ceiling/in hanging position all as specified and directed by Engr-in-Charge.
Supply and fix in replacement to existing lamp of any capacity with LED lamp 9/10 watt complete all as specified and directed.
Supply and fix LED 20 watt post top light fitting AC outdoor type with decorative post top for360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and 20 watt LED lamp all as specified and directed by Engr-in-Charge.
Supply and fix in repair LED driver for recess/surface/suspended mounting 36W Ultra modern designed architectural 2x2 LED luminaire which provides soft-light and glare free symmetrical illumination, all as specified and directed by Engr-in-Charge.
Supply and fix in repair plastic laminated bakelit sheet 3 mm thick of size 4"x 5" cm including screws nut and bolt and cutting of sheet complete all as specified & directed by Engineer-in-Charge.
S & F in repair of geyser element triangle type of capacity 1500 Watt including all material required for fitting complete all as specified and directed.
Taking down of the following accessories in repair works including all necessary fitting items such as screw, nut and bolt, connector, flexible copper wire 1.5/2.5Sqmm size etc including cheking/testing complete as directed by Engr-in-Charge.
Supply and fix in repair switch piano flush type, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge .
Supply and fix in repair socket outlet 5 pin, 06 Amps flush type 240 volts complete all as specified & directed of maby Engr-in-Charge .
Supply and fix in repair switch piano flush type, 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fix in repair socket outlet 3 pin, 06 Amps and 3 pin 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fix in repair lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 1 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 2 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 3 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 4 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 6 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 8 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 1/2 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 2 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 3 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 4 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 6 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair modular switch socket combination16 A, 6 pin, 3 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair modular switch socket outlet 03 pin 06 A, flush type complete all as specified & directed by Engr-in-Charge
Supply and fix in repair modular switch socket outlet 03 pin 16 A, flush type complete all as specified & directed by Engr-in-Charge
S & F in repair, security light brackets of 32 mm dia GI pipe medium grade upto 1.5 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting, including matching the surface with existing all as specified and directed.
Amount of credit of Rs. 169570.90 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
R. P. Suppliers and Construction Co.
Vinod Kumar Aggarwal
Sagar Builders
Varindera And Varindera Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .