REPAIR REPLACEMENT OF INTERNAL WATER SUPPLY, SANITARY FITTINGS, CLEANING OF OH TANKS AND MISC WORKS AT AF STN DINJAN UNDER GE(AF) MOHANBARI

Amount

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc nexc 10cm girth complete all as specified and directed

Taking down or up 15 mm bore GI pipe and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Ditto all as per item No.2 here-in-before but 20 mm bore GI pipe complete all as specified and directed.

S&F 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass thereaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed

Ditto all as per item No.4 here-in-before but 25 mm dia complete all as specified and directed.

Re-fixing 15 mm bore old GI pipe and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed.

Ditto all as per item No.6 here-in-before but 20 mm bore pipe complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 Ltrs capacity, valveless, syphonic action type, low level white with inlet, ball valve, float and handle complete including brackets and connection to pipe complete including dismantling of existing CI flushing cistern high level incl flush pipe etc complete all as specified and directed

S & F in repair for Vitreous China wash down water closet pan (pedestal pattern), white with 'P' pr 'S' trap front or back inlet, fixing bolts, (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Vitreous China Squatting Pan (Orissa Pattern) size 580 mm x 440 mm, white, coloured with 'P' or 'S' strap front or back inlet with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S & F in repair Vitreous China bowl type urinals, size of 465x395x265mm (minimum) ,white with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.

S & F in repair for 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S&F in repairs CP fancy type Bib tap 15 dia cast copper alloy with crutch or butterfly handle ,screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified..

S&F in repair for 15mm dia fancy type pillar taps, cast copper alloy with capstan heads chromium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron complete all as specified and directed

S&F in repairs of Stop Valve(angle valve) 15 mm dia CP Fancy type cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified.

S&F in repairs Shower Rose 125mm size CP with swivel joints, any size, including fixing to steel pipe or union all as specified.

S & F in repairs Brass chromium plated tubelar towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 32mm dia PVC waste pipe approx 850mm long for sink/WHB complete all as specified.

S&F in repair health faucet CP brass with minimum 1.50m long CP flexible pipe, Hose & Wall Hook connection complete all as specified and directed

S&F in repair brass soap dish approximate size 160x160x90mm complete all as specified and directed.

S&F in repair towel ring brass chromium plated with flange fixed on wall with PVC rawl plug & cadmium plated brass screw complete all as specified and directed.

Supply and Fixed in repairs 75 mm dia PVC (SWR) Plain floor trap, with grating including jointing with solvent cement complete all as specified and directed.

M&L in repairs 125 / 110 mm size PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling, finished even and smooth without using extra all as specified and directed.

Material and labour for preparation of new surfaces of walls and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes complete all as specified and directed

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying two coats of cement based paint over a coat of primer white or tinted complete all as specified and directed

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection, cemented path, hard standing and finished surfaces even and fair complete all as specified and directed

M&L for 40 mm thick PCC 1:2:4 type B-1, (using 20 mm graded aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 20 mm thick screeding in CM 1:6 complete all as specified and directed

Material and labour for glazed ceramic coloured tiles of size 300 mm x 200 mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match including over 10 mm thick screeding in CM 1:4 complete all as specified and directed

Dismantling of water tank exc. 250 Litres but not not exc. 500 Litres capacity complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

Dismantling of water tank exc. 500 Litres but not not exc. 1000 Litres capacity complete all as specified and directed.

S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S&F Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed

S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and directed

Cleaning and removing all scale, dirt etc. from OH tanks of capacity 500 Ltrs and from mouths of circulating pipes including writing date of cleaning with white paint complete all as specified and directed.

Cleaning and removing all scale, dirt etc. from OH tanks of capacity 1000 Ltrs and from mouths of circulating pipes including writing date of cleaning with white paint complete all as specified and directed.

Supply and fixed in repairs Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc., overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S&F in repairs 40 mm size waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end, bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fixed in repairs, central hole basin mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.

Supply and fixed in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

M/S CHANDAN ENTERPRISE

M/S N K SAI TRADING

M/S RK Trading

HIND CONSTRUCTION