GE/863/EWS-T-66 OF 2023-24

Amount

Demolition of stone/ boluder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-charge.

Demolition of precast concrete articles and precast concrete block walling, built in cement mortar or cement lime mortar for ashlar facings, dressed stonework, complete all as specified and directed by Engr-in-charge.

Taking down cement plaster of any description on brick or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by Engr-in-charge.

M&L for walling of random rubble stone masonry uncourced, well bonded, bedded and solidly hearted built in CM 1:4, complete all as specified and directed by Engr-in-charge.

All as per item No. 4 above but EXCEPT STONE, complete all as specified and directed by Engr-in-charge.

M&L for precast PCC 1:3:6 type C1 (20mm graded agg) as in bond stones set in cement mortar 1:6 complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as specified and directed by Engr-in-charge.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and directed by Engr-in-charge.

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring jointsfixed on wall with MS clamp, complete all as specified and directed by Engr-in-charge.

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm bore, complete all as specified and directed by Engr-in-charge.

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm bore, complete all as specified and directed by Engr-in-charge.

All as per item No 11 above but fixed in wall, complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) branch pieces single socketed Y equal or unequal of for 110mm bore pipe, complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends any radius 110mm bore pipe, complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends for 75mm bore pipe with oval acess door, complete all as specified and directed by Engr-in-charge.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150mm dia set in cement mortar, complete all as specified and directed by Engr-in-charge.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150 mm bore pipe, complete all as specified and directed by Engr-in-charge.

Supply, laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement, complete all as specified and directed by Engr-in-charge. (Note- cement concrete used for haunching concrete shall be measured and paid seperately)

Demolition of reinforced cement concrete of as staircase, landing, chajjas, drain cover and similar suspended work of any description and any position not otherwise specified, complete all as specified and directed by Engr-in-charge.

Providing precast RCC using 20mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in CM 1:6, complete all as specified and directed by Engr-in-charge.

M&L for TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also, complete all as specified and directed by Engr-in-charge.

Demolition of Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 B1, 20mm graded stone aggregate as in surface channels and drains, complete all as specified and directed by Engr-in-charge.

M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement, complete all as specified and directed by Engr-in-charge.

M&L for 40mm thick plain cement concrete (1:2:4) type B1, (using 20mm graded stone aggregate) as in floor including finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.

M&L for PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6), complete all as specified and directed by Engr-in-charge.

M&L boulder or broken stone filling and packing (any thickness) at back of wall and raising to be required level, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggrgate as in coping to wall, complete all as specified and directed by Engr-in-charge.

Raking out cement mortar joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs etc., complete all as specified and directed by Engr-in-charge.

M&L for cement mortar (1:4) raised pointing to random or polygonal rubble, uncoursed or brought upto courses, complete all as specified and directed by Engr-in-charge.

S&F machine made precast cement concrete blocks (interlocking paver) of 60mm thick with grey cement and pigment over 25mm thick sand cushion including watering and consolidation. The interlocking joints shall be filled with fine sand, complete all as specified and directed by Engr-in-charge. (Note: Sand filling shall be paid separately as material only)

Material only for sand filling under floors or in foundations, complete all as specified and directed by Engr-in-charge.

M & L chequered cement concrete tile 25cm x 25cm /20cm x 20 cm x 22 to 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.

M & L for 75mm thick PCC(1:4:8) Type-D2 using 40mm graded aggregate as in sub base of chequered tile, complete all as specified and directed by Engr-in-charge.

M & L providing 35 mm thick pre-cast cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.

Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mould, mitred/stopped ends etc., complete all as specified and directed by Engr-in-charge.

M&L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded stone aggregate, any width and setting in cement mortar 1 : 6, complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work/PCC block wall or concrete surface finished fair and even without using extra cement, complete all as specified and directed by Engr-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed, complete all as specified and directed by Engr-in-charge.

M&L for Machine cut kota stone of size 550mmx550mm as in slab flooring 18-20 mm thick as in floor over and including 15mm thick screed bed in CM 1:4 laid, bedded and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar, complete all as specified and directed by Engr-in-charge.

Dismantling fencing wire mesh any type, complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire, complete all as specified and directed by Engr-in-charge.

Supply only chain link MS galvanised fencing any size or any type, complete all as specified and directed by Engr-in-charge.

Dismantling posts or struts (Steel or RCC) any section, including taking out embedded portion in concrete, brick work or masonry and making good disturbed surfaces, complete all as specified and directed by Engr-in-charge.

Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceedings 25cm watering and removing surplus soil to distance n exc 50 m and making good surfac in soft/loose soils, complete all as specified and directed by Engr-in-charge.

S&Fsteel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed by Engr-in-charge.

S&F mild steel Framed work ornamental and intricate design such as grills, gratings, etc with ends of bars shouldered or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balluster; walk ways; railings; framework of water tanks and simillar works conforming to Fe290 gde-E-165, complete all as specified and directed by Engr-in-charge.

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying any crossings with provn of MS wire staples or steel pins etc., complete all as specified and directed by Engr-in-charge.

Restraining, resecuring including making good staples etc. of galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in any type of standard rails, straining bolts incl securing or tying any crossings with provn of MS wire staples or steel pins etc., complete all as specified and directed by Engr-in-charge.

M&L for two coats of cement base paint on walls including preparation of new plastered surfaces, complete all as specified and directed by Engr-in-charge.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed by Engr-in-Charge.

M&L for applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth including preparation of surfaces, complete all as specified and directed by Engr-in-charge.

Schedule of Credit

NIRMAL SINGH BHOGAL AND SON

M/S SHIV NATH ENTERPRISES