Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC | L1 | Accepted-AOC Contract is awarded to M/s Yadav Enterprises | |
| 2 | L2₹25.5 L+₹2.5 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 3 | L3₹30.6 L+₹7.6 L (33.0%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest quoted rate |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Pramod Kumar Tripathi
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
WELCOME MAINT, PERIODICAL SERVICES AND OTHER MISC WORKS AT MIC AND S UNDER GE (S) AHMEDNAGAR
2023_MES_596226_1
8980/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹70,000
Yes
20 Jun 2023
17 May 2023
16 Jun 2023
17 May 2023
14 Jun 2023
31 May 2023
17 May 2023 - 24 May 2023
Amount
Dismantling of Kota stone slab, Cudappah, granite & chequered tiles of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floor & paving n. exc. 15cm thick below or above ground level all as specified and as directed.
Demolition of brick/ stone masonry built in cement or lime mortar including all quoins, arches, pillars,etc all as specified and as directed.
Taking down shutters of any description, area exceeding 1Sqm but not exceeding 2Sqm each all as specified and as directed.
Taking down shutters of any description, area exc 1 sqm and n exc 2 sqm each and refixing in the same opening complete all as specified and as directed.
Taking down old steel window / ventilator of any size & type complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exc exceeding 1.5 sq.m each all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 sq. m but not exceeding 4 sqm each all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing all as specified and as directed.
M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed.
M&L for second class hard wood, plain, solid, straight chowkats and frames ,wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and as directed.
S&F 35 mm thick, second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.
S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.
S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood beading all around complete all as specified and as directed.
S&F of solid PVC door frame of size 50mm x 47mm made out of 2mm thick 3D wood grain moulded PVC sheet Polyurethane painted on the front face & 2mm prelam PVC sheet on back face all as specified and as directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet Polyurethane painted on the front face & 2mm prelam PVC sheet on back face , supplying & fixing to frame at site as per specifications & drawing all as specified and as directed.
S&F 150 mm size aluminium anodised tower bolt of extruded section, fixed complete as specified and as directed.
S&F 300 mm long, aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.
S&F 100 mm size butt hinges medium weight, cold rolled mild steel, and fixed all as specified and as directed.
S&F continuous (piano) hinges, mild steel bright finish or electro-galvanised, 30mm width of flaps (when open) all as specified and as directed.
S&F 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.
S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.
S&F in repairs, 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel brass polished, bright finished complete all as specified and as directed.
S&F in repairs, ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.
S&F in repairs 100mm size hasp and staple safety type aluminium with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified and as directed.
S&F in repairs 75mm size hasp and staple safety type aluminium with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified and as directed.
S&F in repairs, harrison curtain rails, 20mm dia, anodised aluminium alloy, chromium plated wih fixed brackets, stops, rollers etc complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame complete all as specified and as directed.
S&F in repairs, galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame complete all as specified and as directed.
S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min)
S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)
S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.
S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and as directed.
S&F mild steel ventilators with top hung shutters including hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and as directed.
S&F mild steel framed work in door frames and similar work conforming to Fe-290,Gde-E-165, including cutting to required length, welding etc including necessary hold fasts complete all as specified and as directed.
M&L for welding in repairs, n exc 2.5cm in length, thickness of metal to be welded n. exc 6mm complete all as specified and as directed.
Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following :- (a) After demolition of floor and lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square meter duly blended with & including water proofing compound. (c) 15mm thick (Average thickness) plaster in cement mortar (1:4) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 hours by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non-woven fabric (weight not less than 150 gm/sqm (e) M&L for PCC 1:7:12 for filling of sunken portion after conceling all membrane and sealing all joints to the entire with broken bats and light weight, floor area of WC/Bath not exceedding 1.5 sqm and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling complete all as satisfaction of Engineer-in-Charge. Note- The rates include for drilling of the hole RCC @ 1.00m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimum 3 Kg/Sqm complete all as specified and directed.
M&L in repairs, for water proofing treatment to RCC roof slab, including parapet, comprising with the following treatment / specifications from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish not exceeding 100m distance from starting point. (ii) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC @ 3% by weight of cement or as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.
S&F in repairs, prelaminated particle board 18/19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work including teak wood lipping all around of 18/19 x 10mm thick including french polishing for inbuilt cupboard shutters and pelmet complete all as specified & as directed.
S&F in repairs, second class hard wood beads, wrought, straight sectional area not exc 13Sqcm each for gauged joinery including mitres and tightning and nailing of wire mesh including two coats of synthetic enamel paint over a coat of pink primer complete all as specified & as directed.
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for machine cut cudappah stone flooring, 20-25 mm thick laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust and roughening of old concrete floor surface complete all as specified and as directed.
M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.
M&L 18-20mm thick pre-polished granite stone slab of approved shade and colour Jet black / Telephone black as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edge, laid over and including 10mm thick backing coat in cement mortar 1:4, jointing, pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and as directed.
Rounding of edges of stone slabs, suchas one edge of steps, cooking platform and other similar work complete all as specified and as directed.
M&L for glazed coloured ceramic tiles 450mm x 350mm x 7mm thick, shade as approved by GE, as on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, shade as approved by GE, as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.
M&L for vitrified coloured ceramic tiles,10mm thick (square / rectangular), area of each tile exc 0.36sqm but n exc 0.42 sqm, shade as approved by GE in floor etc laid over and including 20 mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed.
All as per serial item No 53 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .
M&L for chequered cement concrete tiles, 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cment and pigment in floors, over and including 20 mm thick screed bed in cement mortar 1:6 in floors etc set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of tile complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick masonary surfaces or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.
M&L for 10 mm thick rendering in cement mortar 1:6 on other than fair faces of brick masonry surfaces or concrete surface, finished even and smooth with sagol complete all as specified and as directed.
M&L for preparation of old, plastered or unplastered decorated wall surfaces including cornices, pillars etc, and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.
M&L for preparation of old, plastered or unplastered decorated ceiling surfaces and applying one coat of white wash complete all as specified and as directed.
M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty including chalk whitining complete all as specified and as directed.
M&L for complete removal of existing treatment from Ceiling and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty including chalk whitining complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whitining complete all as specified and as directed.
M & L for complete removal of existing reatment of plastered or unplastered surfaces of walls by washing, rubbing down and stopping of painted marks, applying 1.00mm thick (average) wall care putty and applying two coats of plastic emulsion paint over one coat of primer complete all specified and as directed
M & L for complete removal of existing reatment of plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion weather coat paint over a coat of primer complete all specified and as directed
M & L for preparation of old decorated wall surfaces and applying one coat of exterior acrylic emulsion weather coat paint complete all specified and as directed
M&L for preparation of old decorated plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.
M&L for preparation of new plastered surfaces or previously untreated surface of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed.
M&L for preparation of old decorated plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed
M&L for complete removal of existing treatment by washing, rubbing down, stopping and applying two coats of cement base paint over a coat of primer all as specified and as directed.
Hacking out of old broken glass (any thickness ,size quality, or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S&F 3mm thick frosted / figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.
S&F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.
M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of pink primer complete all as specified and as directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.
M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for 15mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.
M&L for 20mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.
M&L for 15mm dia UPVC pipe, laid in floors / trenches/fixed to walls including fittings (Elbow, Tee, FTA, Socket, reducer, solvent etc) complete all as specified and as directed.
S&F in repairs, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed.
All as per item No. 81 above but 1000 ltr capacity
S&F in repairs, PVC cover/lid for rotational mounded polythene water storage tanks any capacity including fixing with necessary device complete all as specified and as directed.
S&F in repairs, bib tap, 15mm dia cast copper alloy chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, bib tap, 15mm dia cast copper alloy, fancy type, chromium plated, with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
S&F in repairs, stop valves, 20mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repairs, stop valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repairs, angular stop valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repairs, brass chromium plated mixer for sink/WHB for mixing hot and cold water, screwed down for iron pipe, 15 mm bore and fixed complete all as specified and as directed.
S&F in repairs, 32mm dia waste coupling of PTMT (Half or full threaded) minimum weight 40gms complete all as specified and as directed.
S&F in repairs, 32mm bore low density polythene pipe (LDPE) of pressure rating 6Kgf/sqcm including all fittings fixed to wall or laid in floors etc including fittings complete all as specified and as directed
S&F in repairs, ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 15 mm bore iron pipe (Minium weight 142 gms), complete all as specified and directed.
S&F in repairs, ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (Minium weight 210 gms), complete all as specified and directed.
S&F in repairs PTMT shelf (minimum weight 300gm) fixed with and including brass screws and wooden/ plastic cleats complete all as specfied and as dircted.
S & F in repairs, PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.
S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.
S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.
S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall all as specified and as directed.
S&F in repairs, 110 mm dia PVC (SWR) bends with access door, of any radius, complete all as specified and as directed
S&F in repairs, 75 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed
S&F in repairs, PVC (SWR) junction of 110 mm bore single, (single T) equal or unequal with access door, all as specified and as directed
S&F in repairs, PVC (SWR) junction of 75 mm bore single, (single T) equal or unequal with access door, all as specified and as directed
S&F in repairs, grating doom 125mm dia PTMT with waste hole (minimum weight 40gm) complete all as specified and as directed.
M&L in repairs, for PVC (SWR) floor trap, plain with grating including jointing with solvent cement to waste pipe fixed in cement concrete type (1:2:4) type B1all as specified and as directed.
S&F in repairs, jet spray chromium plated with one meter long heavy duty PVC hose butterfly type with chromium plated nuts complete all as specified and as directed.
S&F in repairs, brass chromium plated health faucet (hand shower) with 8 mm dia, 1200 mm long flexible tube, wall mounted / hooked all as specified and as directed.
S&F in repairs, brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union etc complete all as specified and as directed.
S&F in repairs vitreous china squatting pan, white, Orissa pattern of size 580mm x 440mm with integral foot rest, P or S trap, set in cement concrete including flush pipe and connecting to trap / flushing cistern and making good to floor complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet ( pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.
S&F in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe, 15mm dia 600mm long PVC connection complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet, one piece/ cascade with cistern set and soft close glossy (white) seat cover complete all as specified and as directed. Make- Hindware PEARL S-300 one piece set / Prayag one piece commode Niagra S-300mm 4170white or equivalent in Jaquar and Co Pvt Ltd/ Kolher. Note : 1. Tax invoice indicating make and model shall be submitted before payment in RAR/FB 2. Users completion indicating make and model shall be forwarded before payment in RAR/FB.
S&F in repairs, stainless steel sink made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 495 mmx 420 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.
S&F in repairs, glass shelf assembly consisting 5.5mm thick glass shelf, 12cm wide with SS chromium plated bracket guard and railing 60cm long and fixed to wall with stainless steel screws complete all as specified and as directed.
S&F in repairs, cockroach trap of 125 mm dia, chromium plated with or without waste hole complete all as specified and as directed.
S&F in repairs, corner piece of acrylic sheet, colour and design as approved, 30 cm radius fixed with screws all as specified and as directed.
S&F in repairs, stainless steel napkin hanger of dia 150mm fixed with screws on wall etc complete all as specified and as directed.
S&F in repairs, stainless steel toilet paper holder, fixed with screws on wall etc complete all as specified and as directed.
S&F, in repairs, PVC cabinet mirror, 450mm x 300mm x 100mm size, box type, best quality as approved by GE fixed with screws all as specified and as directed.
S&F in repairs, brass CP mixer for mixing hot and cold water and bend for connecting to shower screwed down for iron pipe 15 mm bore and fixed to wall complete all as specified and as directed.
S&F in repairs, wall corner glass shelf assembly of size 30cm x 30cm consisting 5.5mm thick glass and fixed to wall with stainless steel screws complete all as specified and as directed.
NATHKRUPA CONSTRUCTION
AMAR CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .