Improvement of road and Laying of Paver Block in Aryapuri Ratu road under ward No 30

Labour for cleaning the work site before and after work etc.

Labour for site clearence before and after the work etc.

Granular Sub-Base with Coarse Graded Material (Table:-400-1) :- Construction of granular sub- base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (For Grading-II Material)

Providing and laying 80mm thick factory made concrete interlocking pavour block of M-40 grade made by block making machine with strong vibratory compaction of approved size, design and shaped, laid in required colour and pattern over bed as per relevant IRC code filling the joints with fine sand etc all complete as per the direction of E/I

Tack coat on Cement concrete pavement (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.)

Bituminous Macadam Grading (i) with VG-30 Grade Packed Bitumen (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.)

Bituminous Concrete Grading (i) with VG-30 Grade Packed Bitumen (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.2 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

STONE CHIPS-LEAD-15KM

Good & Service Tax (GST)

Labour Cess