Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹14.3 L+₹1.6 L (12.3%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹14.5 L+₹1.8 L (13.9%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹15.0 L+₹2.2 L (17.6%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | L5₹15.3 L+₹2.6 L (20.3%)Admitted-Finance | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | The Trikuta Engineer L6 | SUDERSHAN SINGH L1 | VINAYAK ENGINEERS L2 | V K ELECTRICAL CONTRACTOR L4 | M/s R.P Electronics and Electricals Company L3 | M/s Sai Essentials L7 | ASHISH SINGH L5 | M/s MAHASHAKTI ELECTRICAL WORKS L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00(Creation of 1x250 KVA Sub station at New building of J&K Service selection board office complex, Muthi, Jammu) Providing/Supplying, Erection/Installation, Testing & commissioning comp Job) | |||||||||||
| 1.01 | 11/0.433 KV, 3 Phase 250 KVA Distribution Transformer with Bi-Mettalic Terminal Connectors
(Energy Level-2) Copper wound with extrenly fitted MCCB 200 amp with cable box and 4x4 mtrs. Suitable cable of ratings | 1 | No | 5,50,000 ₹5,50,000 | 5,90,555 ₹5,90,555 | 5,75,000 ₹5,75,000 | 5,10,000 ₹5,10,000 Lowest | 5,50,000 ₹5,50,000 | 6,30,000 ₹6,30,000 | 7,13,698 ₹7,13,698 | 5,57,000 ₹5,57,000 |
| 1.02 | Gapless Surge Arrester, 9 KV, 10 KA, Lightening Arrestor with Polymer housing Station Type | 1 | Set | 2,000 ₹2,000 Lowest | 4,000 ₹4,000 | 6,000 ₹6,000 | 3,000 ₹3,000 | 7,500 ₹7,500 | 6,000 ₹6,000 | 6,000 ₹6,000 | 7,000 ₹7,000 |
| 1.03 | 11 KV GO, AB Switch 3 Phase, 3 Pole, 200 amp, vertical type | 1 | Set | 9,000 ₹9,000 | 7,500 ₹7,500 | 9,000 ₹9,000 | 7,000 ₹7,000 Lowest | 9,500 ₹9,500 | 8,500 ₹8,500 | 12,000 ₹12,000 | 9,000 ₹9,000 |
| 1.04 | 11 KV Horn Gap Fuse Set 3 Phase, 200 amp | 1 | Set | 3,000 ₹3,000 Lowest | 4,000 ₹4,000 | 4,000 ₹4,000 | 3,000 ₹3,000 Lowest | 5,500 ₹5,500 | 5,000 ₹5,000 | 6,000 ₹6,000 | 6,000 ₹6,000 |
| 1.05 | 300 mm² Single core cable, 1.1KV Grade, PVC insulated stranded conductor FRLS type | 44 | Mtr | 500 ₹22,000 | 520 ₹22,880 | 400 ₹17,600 | 300 ₹13,200 Lowest | 550 ₹24,200 | 300 ₹13,200 Lowest | 400 ₹17,600 | 650 ₹28,600 |
| 1.06 | ST Poles 9.0 Mtr long (ST -410 SP 33) | 2 | No | 18,000 ₹36,000 | 16,500 ₹33,000 Lowest | 18,000 ₹36,000 | 16,500 ₹33,000 Lowest | 21,500 ₹43,000 | 17,000 ₹34,000 | 30,000 ₹60,000 | 19,000 ₹38,000 |
| 1.07 | 11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings | 3 | No | 300 ₹900 | 420 ₹1,260 | 600 ₹1,800 | 300 ₹900 | 350 ₹1,050 | 300 ₹900 | 100 ₹300 Lowest | 400 ₹1,200 |
| 1.08 | GI Channel/Angle/Flat of sizes including clamps | 300 | Kg | 140 ₹42,000 | 120 ₹36,000 | 140 ₹42,000 | 130 ₹39,000 | 150 ₹45,000 | 120 ₹36,000 | 110 ₹33,000 Lowest | 150 ₹45,000 |
| 1.09 | Galvinized Nuts & Bolts | 8 | Kg | 140 ₹1,120 | 115 ₹920 Lowest | 160 ₹1,280 | 130 ₹1,040 | 150 ₹1,200 | 120 ₹960 | 200 ₹1,600 | 150 ₹1,200 |
Tender Value
Refer Docs
EMD Value
₹44,800
Closing Date
18 Aug 2025, 2:00 pmClosed
Executive Engineer ED-III
Office of Executive Engineer ED-III
Creation of 250 KVA Sub Station at New building of JandK Service selection board office complex Muthi Jammu under Deposit contribution work falling under the jurisdiction of Electric Sub Division Canal on Turnkey basis
2025_PDD_283260_1
ED-III/Jammu/23A of 2025-26
Open Tender
Electrical Works
Item Rate
30 days
Jurisdiction Of Electric SD Canal
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
Executive Engineer ED-III
₹44,800
1 Sept 2025
4 Aug 2025
19 Aug 2025
4 Aug 2025
18 Aug 2025
4 Aug 2025
Amount
11/0.433 KV, 3 Phase 250 KVA Distribution Transformer with Bi-Mettalic Terminal Connectors (Energy Level-2) Copper wound with extrenly fitted MCCB 200 amp with cable box and 4x4 mtrs. Suitable cable of ratings
Gapless Surge Arrester, 9 KV, 10 KA, Lightening Arrestor with Polymer housing Station Type
11 KV GO, AB Switch 3 Phase, 3 Pole, 200 amp, vertical type
11 KV Horn Gap Fuse Set 3 Phase, 200 amp
300 mm² Single core cable, 1.1KV Grade, PVC insulated stranded conductor FRLS type
ST Poles 9.0 Mtr long (ST -410 SP 33)
11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings
GI Channel/Angle/Flat of sizes including clamps
Galvinized Nuts & Bolts
Earthing of Sub-Station -Excavation of earth pitof diameter 650mm and deapth 3000mm, installation of earthing pipe of 40mm nominal bore and 4mm wall thickness and length 2.5m long as per IS 1239 GI Strip for neutral earthing of size 25mm into 3 mm for connection of transformer body, GO Set and lightening arrestor as per IS 2629/85, GI Nuts & Bolts, refilled with earth enhancement material
11 KV Polymeric composite Pin Insulators 12KV, 5KN,lighting inpulse 75KV positive and 80KV negative, creepage distance 320mm
Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete
Wedge connectors/PG Clamps
Danger Plates with Clamps
GI Barbed wire for Anti Climbing
Cement Bottoming 1:2:4 mix as per REC Standards 0.5cum/pole
Painting of Poles Red-Oxide
Painting of Poles Aluminium Paint
Sundry items like Aluminium Lugs, Jumpers, Binding Tape Aluminium Thimbles etc.
ST Pole 9.0 Mtr long (ST-410 SP33)
50 mm2 (HT Cable XLPE (11KV, 3C+ Earth)
Heat shrinkable outddor cable Termination Kit
Suspension/Tension Clamps with eye hook
Galvanized nuts & Bolts
Danger Plates with Clamps
Anti Climbing Device with Clamps
Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip
Red Oxide
Aluminium Paint
Cement Bottoming 1:2:4 mix as per REC Standards 0.45cum/pole
Mid span straight through Joining kit for 11 KV ABC
Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete
ST Poles 8.0 Mtr long (ST- 410 SP 15)
400 mm2 , 3 1/2 Core Cable, 1.1 Grade, Armoured , XLPE
Suspension/Tension Clamps with eye hook
Straight through Cable Joining kit
Galvanized nuts & Bolts
Danger Plates
Anti Climbing Device with Clamps
Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip
Cement Bottoming 1:2:4 mix as per REC Standards 0.45cum/pole
Red Oxide
Aluminium Paint
Insulating Piercing Connectors
PG Clamps
Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete
Supply, Installation, Testing & Commissioning of 11KV CT/PT unit with Trivector Meter
11kV Pilfer resistant metering cubicle for 3phase 4 wire metering system made of MS Sheet steel thickness not less than 2mm duly power coat painted suitable for indoor as well as outdoor as per the site requirement. The cubicle shall be painted through 7-tank process. The External dimensions should be adequate. Panel having two compartments upper Meter compartment and lower CT/PT compartment. Provided with synthetic or semi synthetic gasket firmly glued to the sufrace, Dust, weather and Vermin proof and shall comply degree of protection IP 65 both the chambers having one sided hinged door arrangments. The metering panel shall be provided with two No MS channels of size 100 x 50 mm on the front and rear sides duly welded and 4 No of lifting hooks. It should be possible to take meter reading manually, through CMRI and computer without opening the LV chamber door.
Single Phase, Single core, single ratio, Epoxy resin Cast Current Transformers suitable for 11kV, copper wound primary type with rated burden 5VA and accuracy class 0.5 or better and conforming to IS2705 (part-I & II) amended upto date. ISF shall be upto 5 The CT ratio shall be as 20/5 for 250kVA DT
11kV/ 110 V, Three phase epoxy resin cast PT with rated burden 15VA per phase and accuracy class 0.5 or better and conforming to IS:3156 (part-I&II) amended upto date with proper colour coded identification. PTs shall be of uniform insulating and withstand separate source 23kV pf for one minute.
Bus Bar details: CTs bus bar:- 40x6 mm copper strip or adequate size PTs bus bar: Copper wire 8 SWG or 30x0.6mm copper flat strip to connect PT terminal or adequate size duly insulated by the monoplast tape
PVC Copper wire flexible multi-strand of required size for secondary connections for CT wiring the minimum wire size shall be 4 mm2 (RYB) and for PT wiring minimum wire size shall be 2.5 mm2 (RYB).
Copper Lugs preferably ring type duly crimped for termination of wires and tapes
Grounding bus of minimum 40mm copper, 25cm long fixed to the unit in HV chamber. The CTs, PT meter and 11kV Cable sheath shall be grounded to the bus through grounding wire (green) of min size 10mm2
3Ph3 Wire HT CT/PT operated Fully static Smart Tri-Vector Energymeters DLMS Compliant Category 'C' with RS232 port for modem compatibility. 11kV/110V, Ph-Ph (3P,3W) meters for measurement of different electrical parameters including Active Energy (kWh/ MWh), Reactive Energy (kVArh/MVArh), Apparent Energy (kVAh/ MVAh) etc. (make L&T, Secure, ABB)
Independent flexible PVC pipes for CT wiring and PT wiring of appropriate size from HT compartment to meter compartment
Pedestal made out of MS Channel of size 75 x 40 mm or angle iron of size 65 x 65 x 5 mm, duly painted as per site requirement for mounting of metering panel including concrete foundation wherever required including cost of nuts and bolts
3 Core 11 kV Aluminium cable XLPE armoured 35 mm2 including cost of clamp for its fixing where ever required.
Cable termination kits suitable for 3 x 35 mm2 XLPE Cable (indoor/outdoor)
Earthing 40 mm GI Pipe or 20 mm GI rod, 2.5 mtr for metering unit. Earthing of metering cubicle through two No 25 x 5 mm flat iron.
VINAYAK ENGINEERS (BID ID -2444154)
M/s R.P Electronics and Electricals Company (BID ID -2443387)
V K ELECTRICAL CONTRACTOR (BID ID -2445102)
ASHISH SINGH (BID ID -2436920)
The Trikuta Engineer (BID ID -2438594)
M/s Sai Essentials (BID ID -2443908)
M/s MAHASHAKTI ELECTRICAL WORKS (BID ID -2444716)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .