PROVIDING NEW GATE AND GEARING SYSTEM AND REMODELING OF CANAL REGULATING STRUCTURES PHILLAUR DISTY and GORAYA DISTY HEAD AT RD 0 OFFTAKING FROM TAIL RD 75000 OF NAWANSHAHR BRANCH

Amount

Dismantling brick work tile, masonry or tile lining in Cement

Dismantling Concrete (Cement concrete plain 1:4:8 or 1:5:10)

Dismantling Concrete Cement concrete plain1:2:4 mix

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Cement concrete 1:3:6 mixing by mechanical means using concrete mixer volumetric type CC M10

Cement concrete lining 10cm. thick or less with mechanical Paver for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

First class brick on edge paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical and bartering including attached pillasters buttresses etc). Complete in all respect.

Nicking cement concrete surface (over 28 days old) including preparation and laying slurry

Cement pointing 1:2 deep variety

Cement pointing 1:2 flush on flat brick flooring

Brick lining 7.5cm thick in 1:3 cement sand mortar over 12.5 mm thick base plaster 1:6 over dressed sub?grade including laying, trenching and jointing of low density polyethylene.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.

Filling brick bats in crates and hand packing.

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge.

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providingof hollow bulb seal (Side Seal) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and fixing in position of flat/wedge Seal including preparation of surface complete in all respect and to entire satisfications of engineer in charge.

Providing & Fixing MS Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel casting as per IS specifications and grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide

Providing and Fixing GI pipe of 1.5" dia complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing J -anchor dia 16mm complete in all respect and to entire satisfaction of engineer in-charge.

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

CI Housing Cover worm & worm wheel assembly shaft, handle GM Bust with triple start threading inside for sprindle complete including labour charges.

Providing and Fixing MS Spindle of 1 Ton Capacity

Providing and Fixing MS Spindle of 1.5 Ton Capacity

Providing and Fixing MS Spindle of 1.75 Ton Capacity

UNITED ENGINEERING COMPANY