Replacement of Electric control panel

Amount

Supplying and fixing 5 amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make Havells /Legrand /Anchor/ C&S/L&T/Siemen/IA/HPL/Standard) Single pole

Supplying and fixing of following ratings and pole 240/415 volts, SPN/Isolators in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make Havells /Legrand /Anchor/C&S/L&T/ Siemen /IA/HPL/Standard) 40 Amp 240 volts double pole

Supplying and fixing following ways and poles, plain/horizontal sheet steel MCB Distribution Board on surface/in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections including powder painted earthing etc. as required (But without MCB/RCCB/Isolators) (Indokapp, Havells/Anchor /I.A /Legrand/Standard) 8 way 240 volts Single Door

Providing and fixing following rating and breaking capacity MCCB with Thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. (Make Siemens/Schreinder/ L&T/Hager/Havells/Anchor) 100 AMP 16KA TP MCCB

--------------do-------------- 200 AMP 36 KA FP MCCB

S/drawing of following size of FR PVC insulated Copper Conductor Single core cable in the existing surface/recessed steel/PVC conduit as reqd. (Wire Make ISI Marked Havells/Anchor/Shalimar/KEI/Polycab) (Conduit Make - ISI Marked Anchor/High Power /Finlox/National Gold/Shalimar /Ravindra) 2 x 2.5 sqmn

--------------do---------------- 2 x 6 sqmmm

Design, manufacture, testing at works & supply, installation, testing & commissioning cubicle panel floor mounted (on base frame) totally enclosed and extensible type . The general construction shall comprise to IS 8623-93. The design shall include all provisions for safety of operating and maintenance personal. IP 42 for indoor and IP54 for outdoor, shall be compartmentalized type having space and arrangements for I/C. cable/bus ducting/incoming switch gears, bus couplers, insulated and properly supported compartmentalized switch gear, outgoing compartmentalized switch gear, bus bar support and terminations, interconnection between bus bars & switch gear with auxiliary bus bars/insulated conductors/strips etc. The panel shall be fabricated out of CRCA not less than 2.00 mm thick for the load bearing members and 1.6mm for doors of L.T Panels. The frame work may be Agle Iron/Channel/Bolted type construction should be arrangement for I/C/O/G. Cable termination with 2 Each. 20x5mm cu. Strip fixed all around the panel connected to 2 Each. earth bars cu-strips connected to incoming earth conductor. (Make Electric Field/ Hindustan/Bharti Engineers/ Gupta & Friends/ Semon/ Jai maa/U.S.Electrical works/JK Power Control) MAIN OUTDOOR /BUILDING CONTROL PANEL a. INCOMING Space for 1 No. 100 to 630 Amp 4-pole MCCB of 25 to 50 KA. INDICATING PANEL The indicating panel of the incomer shall be provided with the following: i. Ammeter of required range with ASS, CT's. ii.Voltmeter of required range with VSS. BUS BAR Space for 1 No. 100 to 630 Amp TPN Al. Bus bar of equal cross section for power load and light load. OUTGOING Space for minimum 4 to 6 No. 100 to 630 Amp 4 pole MCCB of 25-50 KA. Dimensions (4’x3’x1’6”)