Civil Work

Amount

Providing post constructional anti termite treatment by drilling holes 1/2" dia at uniform intervals of 12" at the junction of walls and floors to a depth of 4" to 6" inside the building best quality anti termite solution shall be injected into these holes by using hand pump or pressure pump till its refusal. The wooden frames shall be treated with the anti termite solution and the outer periphery of the building shall be treated by making a small channel alround the building with suitable intervals after completion of the treatment all the holes drilled in the floors and walls will be closed and finishing neatly with cement mortar 1:3 and with the white cement or other suitbale materials to render the surface to original condition at his own cost. The rate is inclusive of all labour and the work should be done as per IS 6313 of 1981 etc compete complying with standard specification and as directed by the departmental officers at site of work.

Removing and stacking the old paver block and clearing away carefully disposal od damaged materials to a lead of 50m etc., complete complying with standard specification and as directed by the deaprtmental officers at site of work.

Dismantling the damaged broken flooring tiles and clearing away carefully disposal of unserviceable materials to a lead of 50m etc complete complying with std specfn. and as directed by the deptl officers.

Dismantling the damaged broken wall tiles and clearing away carefully disposal of unserviceable materials to a lead of 50m etc complete complying with std specfn. and as directed by the deptl officers.

Dismantling, Plain cement concrete and clearing away the same 50 m away from the site and roughening the surface etc., complete complying with standard specification and as directed by the Departmental officers.

Dismantling the damaged Brick work in cement mortar under 3m height and clearing away carefully disposal of unserviceable materials to lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling , removing and carefully stacking Doors &windowsincludung removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged broken brick jelly lime concrete and clearing away carefully disposal of unserviceable materials to a lead of 50m etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and filling in foundation, basement, etc with filling M sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Relaying the Plain Cement concrete 1:5:10 (One cement five sand and ten broken Machine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers.

Levelling Course 20mm thick, Plain cement concrete 1:2:4 (one of cement two of river sand four of aggregate) using 3 to 10mm chips hard broken granite stone jelly an top rubbing smooth, thread lining etc complete complying with standard specification and as directed by the departmental officers at site of work.

Relaying Brick jelly cement concrete 1:2:5 (One of cement two of lime five of brick jelly) using 20mm brick jelly for foundation etc including dewatering if found necessary and laid in layer of not more than 15cm thick etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and erecting centering for sides and soffits including supportsand strutting upto 3m height for plain surface such as RCC slbs, rectangular beams, TEE or Ell beams lintels, bed blocks, staircase, waist and landing slab, landking beams, canopy etc., with all cross bracings using deck slab profile sheet stiffened with welded mild steel angles of size 25mm x25mm x6mm for boarding laid over silver oak (country wood) joist of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fabricating palcing the M S Galvanised Deck profile metal sheet 3 mm thick of approved quality and make including labour for fabrication and petty iron works and welding welding rigidly with the aid of 10guage electrode grinding smoothy and conveying the post to the site and erecting the same with necessary scaffolding materials Bolts, nuts etc complete as directed by the Departmental officers

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

For Super structure in Ground floor

Construction of Brick work in C.M1:5 (one of cement five of river sand) in foundation, and basement and superstructure walls using second class ground moulded chamber burnt bricks of size 9"x4 3/8"x 2 3/4" etc complete complying with std specfn.

For Super structure in Ground floor

For Super structure in First floor

Brick partition walls of 11.50cm thickness using best quality II Class Table Moulded Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three M Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm thick mixing the Fibre modified compound using the Fosroc Nito Bond SBR or equivelent branded 2% by weight of cement in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50mm thickness in RCC 1:2:4 (one cement, two M sand and four aggregates), using 20mm HBGS jelly including cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Renewing the damaged broken cuddapah slab with new Black galaxy Granite slab for working top slab of 18 to 20 mm thick over the existing RC slab bed CM 1:3 (one cement three sand) including labour for fixing in position etc., complete complying with standard specification and as directed by the departmental officers.

Providing water proof treatment for toilet sunken area by using new elastomeric coat and removing all existing paint, putty and Loose plaster over wall, clean surface preparation with metal brush & putty blade also complete touch up work with applying acrylic polymer modified bonding coat with Acrylic primer added to the cement with 1:1.5 ratio apply one coats as a protection coating & to make the surface strong and laying 45 GSM fiber mesh. Followed by two coat of elastomeric (Polycons Proof) water proofing coating over the mesh. The rate including labour charges, Acrylic primer, Elastomeric, POP and scaffolding etc., complete complying with standard specification and as directed by the departmental Officers at site of work.

Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick mixing the Fibre modified compound using the Fosroc Nito Bond SBR or equivelent branded 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Supplying laying and jointing best variety CPVC pipe of approved quality of the 20mm dia (˘SDR 13.50) including labour for fixing CPVC specials, cutting, Treading fiixng to wall with in posiiton excluding cost of specials etc complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and fixing in position of the following dia CPVC/PVC specials of approved quality and variety of various size confirming to ISS and providing leak proof joint by CPVC/PVC adhesive etc., including necessary cutting, threading and fixing and giving connection to UPVC/PVC pipes etc., complete complying with standard specification and as directed by the Departmental Officer

3/4" CPVC Elbow

3/4" CPVC Tee

3/4"x1/2" CPVC Tee

3/4"x1/2" CPVC Elbow

4" PVC Elbow

2 1/2" PVC Elbow

4" PVC Door Tee

2 1/2" PVC Door Tee

Renewing and laying and jointing PVC Pipe of approved quality and best variety confirming to ISI and ISS make including cutting threading and firming PVC specials but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.

PVC Pipe of (4") 110mm dia size 6 Kg/cm2

PVC Pipe of (2 1/2") 75mm dia size 6 Kg/cm2

Supplying and fixing in position of /PVC nahini /Floor Trap with SS Grating type of size 100x75/75x50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1:2:5(One lime two sand and five aggregate) brick jelly 40mm and finishing with CM 1:3(One cement and three sand) including dismantling masonry wherever found necessary and making good to the original condition and giving connections to the cast iron pipes etc., complete complying with standard specification and as directed by the Departmental Officer

Relaying and paving flooring with new ceramic tiles of Rustic finish Aspira Dark Kajaria branded (or) equvelent make of size 400mm x 400mm x 9mm thick of approved quality colour and and set in cement mortar 1:3 (one of cement three of river sand) 20mm thick and pointing with colour cement at the rate of 0.40kg/m2 and laid in situ in true and straight alignment with out any air gap in between cement tiles and pointing flush with tiled surface etc complete complying with standard specification and as directed by the departmental officers at site of work.

Dadooing the walls using special printed glazed finish with High lighter concept design Ceramic tiles of Aspira Decor Kajaria branded (or) equvelent make ofsize 800 x 400 x 9mm thick of approved qualtiy colour and quality and set in cement mortar 1:2 (One of cement and two of river sand) 10mm thick and pointing with colour cement at the rate of 0.40Kg/m2 and laid in situ in true and straight alignment without any air gap between ceramic tiles and pointing flush with tiled surface etc complete complying with standard specification and as directed by the departmental officers at site of work.

Repaving the floor with Double charged vitrified tiles of size 800mm x 800mm x 10mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.ncerned before use on work, etc., complete.

Providing Teak wood wrought and put up for frames of doors, window and ventilators and any other similar joinery works including cost of teak wood scantlings of size over 2m and below 3m in length and labour for manufacturing the frames and fixing hold fasts and fixing in position etc for all lengths as per architect designs.

Renewing the damaged broken ply with new one supplying and fixing both side teak finished finished premium branded of approved quality and brand and fixing the same over the solid core flush door shutter 35 mm thick and fixing Teak wood lipping alround sides over the solid core flush door with necessary Tw lipping alround the door shutter 40x8mm thick and fixing the 12 mm thick brushed steel finish T Section at horizontal position 3Nos each side of approved quality and make including labour charges fixing in postion Labour for wrought and putup, fixing necessary furniture fittings Such as Brass Butt Hinges, Brass Tower bolt, Brass Door Stopper, etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken worn out ply with new one supplying fixing and finished with 4mm OST Plywood both side over the existing solid core flush door shutter 35 mm thick and fixing Teak wood lipping alround sides over the solid core flush door with necessary nails etc including labour charges fixing in postion , Labour for wrought and putup, fixing necessary furniture fittings Such as Brass Butt Hinges, Brass Tower bolt, Brass Door Stopper and finally fixing in postion as directed by the Departmental officers s etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken white ants eaten Door Shutter with new one of teak wood glazed Door Shutter 2/3 Door opening and 1/3 Door Opening glazed Door Shutters with outer frame of approved design using the teak wood frame outer 0f size 100mmx75mm and fixing the Teak wood shutters using the teak wood styles of size 75mmx40mm (6 Nos) and fixing the teak wood rails (6Nos ) Of size 75mmx40mm , fixing the chamfer edge plain glass 8 mm thick for fixed portion and Shutter area , labour for wrought and put up in position fixing the furniture fittings such as 125 mm Antique finish Butt Hinges Hinges,150 mm Antique Finish Brass Handle150 mm , Antique finish Brass tower bolt , magnetic catcher (1Nos ), etc., complete Complying with standard specefication and as directed by the Depart mental officers

Renewing the damaged broken glass panes with new one of supplying and fixing the 12mm thick tinted grey toughned glass sliding door with fixed glass partition of approved required size and as per site condition and directed by departmental officers the sliding door and partition made of toughned glass panes 12mm tk shall be erected and fixed with out frame (frame less) and assembles with necessary patch fittings using dorma (or) Agile branded branded fittings, Sliding Special type Track for accomdating the sliding glass with easy move ment and fixing the Dorma branded fittings such as ''H'' type SS 304 grade 25mm x450 mm Handle , Hook lock , Floor Guide etc including cutting the glass sheet and grinding neatly and erecting the glass panes in position as per drawing and direction with necessary scaffolding structural supports etc including floor cutting, if found necessary during execution as directed and full statisfication of deptl officers ( The rate inclusive of Transportation, Loading and unloading charges)

Renewing the damaged broken white ants eaten cupboard with new one of supplying and fixing floorbase semi modular kitchen cabinets with shutters unit as per design drawing given by the deptl.officers using first quality 19mmtk marine grade ply with both side laminated ply edge banded for alround box and fixing the marine grade 19mm tk ply with first quality laminated both side edgebanded shutters including labour for wrought and put up ,labour for manufacturing and fixing in position with necessary furniture fittings such as magnetic catchers ,butterfly hinges ,Handles and fixing the black granite 18 to 20 mm thick over the modular CB etc complete and as directed by the Departmental officers

Renewing the damaged broken white ants eaten cupboard with new one of supplying and fixing wall units kitchen cabinets 300mm wide with glazed shutters unit as per design drawing given by the deptl.officers using first quality 19mmtk marine grade ply with both side laminated ply edge banded for alround box and fixing the marine grade 19mm tk ply with first quality laminated both side edgebanded shutters including labour for wrought and put up ,labour for manufacturing and fixing in position with necessary furniture fittings such as magnetic catchers ,butterfly hinges ,Handles etc complete and as directed by the Departmental officers .

Supplying and fixing the following acessories / Appliances including labour for installation as directed by the Departmental officers .

Plain pull out

Oil Pull out

PVC Plain Tray

Renewing the damaged broken white ants eaten CB Shutters with new one of Supplying and fixing the teak finished CB 450 mm wide with shutter arrangements as per design drawing given by the Departmental officers and using the Pre laminated Ply 1mm thick both side over the 19 mm thick BWR Ply with necessary TW lipping , including labour for manufacturing the Ward Robe shutter , labour for wrought and put up,fixing the furniture fittings such as Butter fly hinges ,Handle profile ,multi purpose lock , and finally melamine Varnishing two coats of over primer etc complete complying with standard specefication etc complete.

Supplying and fixing the teak finished wall panelling using the vertical and Horizontal frames country wood make of size 75mmx40 mm at 750 mm c/c both ways and fixing the 4mm OST venner ply exterior sides over 19mmtk water proof ply with necessary teakwood ornamental design beeding 45mmx40 mm and finally melamine varnishing two coats of approved matt shade colour labour for wrought and putup fixing with necessary clamps, naills and cost of fevicol etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged Doors with new one of Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Door of Casement type sections. The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fushion welded. windows should bed steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. All the hardwares like friction stays, handle should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. The window system should be galzed with 5mm Plain float glass / 6mm bison lam. The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcemnet chamber. The window system should be fixed directly to the Plastered brick wall using self expanding nyl;on plug and driving ms eletroplated screws into plug.

Renewing the damaged broken unserviceable European water closet Concealed tank with new one of European Water Closet concealled tank single piece concealed cistern body (Front top Actuation) with floor mounting frame, installation kit and "s" typr drain pipe connection set for wall Hung (WC) ROCA model or equivalent branded of approved quality and make including Dismantling the existing brick work, Level Flushing Tank kohinoor connection, labour for fixing in position, packing alround concealed tank, etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable European water closet with new one of European Water Closet Wall Gap sq Compact wall Hung WC 480 x 347 x 315 with UF slim Soft close seat cover, Hinges, Accessories ROCA model or equivalent branded of approved quality and make including labour for fixing in position with necessary anchor bolts on the wall etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Wash basin with newone of supplying and fixing earthernware Hall Wash Basin 550 x 485mm white with Half pedestal Roca Model or equivalent model make in position using the best quality wash basinwith a pair of CI brackets including cost of 32mm dia plug and chain, 15mm dia brass nipple 15mm dia nylon connection including fixing the wash basin in the wall in position of GI brackets with teakwood plugs screws and giving necessary water supply connection painting the brackets with two coats of over a priming coat of anti corrosive paint including testing for leakage etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Wash basin with newone of supplying and fixing Khroma Wash Basin Bowl Counter top basin with bottle trap Roca Model or equivalent model make in position using the best quality wash basinwith a pair of CI brackets including cost of 32mm dia plug and chain, 15mm dia brass nipple 15mm dia nylon connection including fixing the wash basin in the wall in position of GI brackets with teakwood plugs screws and giving necessary water supply connection painting the brackets with two coats of over a priming coat of anti corrosive paint including testing for leakage etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable two way bib cock with new one of Saona two way bib cock ROCA model or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damage broken unserviceable Health faucet with new one of Health Faucet with Hose & Hook - chrome Roca model or equivalent make of approved quality and make including labour charges for fixing in position etc. complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Pillar cock with new one of Saona Pillar cock Roca model or equivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Divertor straand Spout singulier new one of Saona High flow Built in Bath shower Concealed body and Bath shower mixer upper trim Roca model or equivalent make of approved quality and make including labour for fixing in position etc complete complying with standard specification

Renewing the damaged broken unserviceable Spout tub with new one of 170mm wall Spout with flange Roca Model or equivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Over head Shower with arm new one of Rainsense Square 200 x 200mm and Straight wall arm for shower head Roca branded or equivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Hand Shower new one of Plenum Square Hand shower with hose Roca branded or equivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken Stop cock with new one of Concealed stop cock and Exposed Part kit of Concealed stop cock Roca model or Equaivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Angle Valve with new one of Saona Angle valve Roca model or Equal branded approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Soap dish with new one of Lure soap dish Holder Roca model or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Tumbler Holder with new one of Twin Tumbler Holder wall mounted Roca Model or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Soap dispenser with new one of Lure soap dispenser Roca Model or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Towel Rail with new one of Lure Towel Rail Roca Model or equivalent branded of approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Towel Rack with new one of Lure Towel rack 600mm Roca model or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Towel ring with new one of Lure Towel ring Round 200mm dia Roca branded or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Glass Shelf with new one of Hotel 2.0 Glass shelf 600mm Standard size Roca branded or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Twin robe hook with new one of Twin robe hook standard Roca branded or equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Paper Holder with new one of Lure Paper Holder with cover Roca Model or equivalent branded approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable connection hose dia with new one 450mm Braided Hoses for Geyser or equivalent make approved and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Full threaded waste coupling with new one ALD-CHR-705-Waste coupling 32mm full thread or equivalent quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable cock roach trap with new one of 48516 Drain with cockroach trap (2 Bowels Type) VG equivalent approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable fisher bolt with new one of RAG BOLT or FISHER bolt Jaquar model or equivalent branded approved quality make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken unserviceable Stainless steel Sink with new one 75 x 40 x 20 sink Double Bowl with Drainer Corner CL Roca or equivalent quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken Sink cock with new one of Atlas Sink cock Roca or Equaivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Renewing the damaged broken Dustbin with new one of Dustbin 3L T6601A1 Parryware model or Equaivalent branded of approved quality and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.

Through scrapping the External Wall surface and filling the cracks and holes using the crack seal and white cement and fine sand 1:3 Ratio seal and Applying water based external wall putty (Acrylic Binders for filling and smoothening out cracks and dents on the plastered wall) over the priming coat surface after drying period of 20 to 24 Hours and again applying water based exterior primer one coat to make surface clean and smooth finish and finally applying second coat externall wall putty to wall surface including provision for the arrangements for labour safety, provision for temporary shielding arrangements for inside to safe guard them filling the public high scaffolding charges safety belt, neat finishing and painting two coats of interior emulsion paint over the base coat etc complete complying with standard specification and as directed by the departmental officers at site of work.

Melamine Varnishing the old wood work two coats over one coat sealer coats including through scrapping, sand papering and scrapping including removal and refitting of shutters etc complete. complying with std specfn

Labour charges for removing and Stacking existing sanitary fittings and water supply fittings and as directed by the departmental officers at site of work.

European water closet

Washbasin

Three in one wall mixer tap

Health faucet

Over head shower

pillar cock

Angle cock

Towel Rod

Paper Holder

Soap dish

Straight shelf

Labour charges for fixing the existing sanitary fittings and water supply fittings after cleaning the surface neatly by using glove (or) similar cleaning powders, etc., including the fixing charges, bolts, traps, packing white cement, shellac, threads, self tapping screws, etc., complete complying with standard specification and as directed by the departmental officers at site of work.

European water closet

Washbasin

Three in one wall mixer tap

Health faucet

Over head shower

pillar cock

Angle cock

Towel Rod

Paper Holder

Soap dish

Straight shelf

Supplying, erecting , manufacturing and fixing the tensile roof structure using the steel structure and membrane shall be 2 KN / m in both warp and minimum 950 GSM. The structure is to be tensioned after erection to maintain a smooth surface to minimum of 10% specefied as priested levels. The complete steel structure will be 76mm dia circular pipes for truss and 80 x 40mm MS rectangular section purlin, with thickness with necessary bolts, nuts wire rope, corner plate finished with two coats of Epoxy primer, two caots of Epoxy paint and approved colour, the memberane fabric patterned with high frequency ferrari 902 Fabrics and welding rigidly and fixing the necessary special aluminium extrusions at the end of the roof truss and special screws etc and finally finishing the surface neatly as directed by the departmental officers. Etc., complete complying with standard specification.

Providing and laying factory made chamfered edge cement concrete paver blocks 60mm thick of approved colour, design & patern in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over required 50mm compacted bed of M sand, compacting and proper embedding laying of inter locking paver locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as per direction of Engineer-in-charge.

Labour charges for relaying the old available paver blocks over the compacted bed of course sand or quarry dust etc compacting and proper embedding / laying of inter locked paver blocks in ture and straight alignment with proper gradient over the sand bedding layer through vibratory compction by using the plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and compacting the paver surface neatly with out any undulations and sweeping the extra sand and cleaning the paver surface neatly etc., complete complying with standard specification and as directed and full satisfaction of departmental officers

Hire charges for providing the two legged pipe scaffolding using the 40mm dia first class MS pipe including fixing cross bracing, couplings, EJP couplers for cross bracings and base plate including erection of scaffolding, conveyance charges, loading and unloading charges and removing the scaffolding after completion of the works and removing from the site etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Repairing and recoditioning upholstery sofa, renewal of uholstery cloth, resetting the wooden frame work, providing new springs, new cushions and new legs with new cushion etc., and finishing the sofa covered with superior quality D.Decor cloth and finishing the sofa neatly, etc.,

Three Seater Sofa

Single Seater Sofa

Cum Bed Sofa with polish

Three seater carving wooden sofa with polish

Two seater carving wooden sofa with polish

Single seater carving wooden sofa with polish

Writing table chair

Cushion Dining chair seat and back & out back with polish

Cushion Dining table chair seat only with polish

Renewal of furnishing with new ones

Sleepwell king size mattress Nexa premium 78" x 72"-8"

King size Bed sheet with pillow cover

Sleepwell foam sensus pillow standard size

Supplying & fixing the ISMC Beam box section over all Size 200mmx150mm with M.S. Chaq plate 6mm thick both side (22.30Kg / M) of approved quality and make including cutting the ISMC of required length and removing the Bend connecting the Channel and welding rigidly with the aid of 10guage electrode grinding smoothy and conveying the post to the site and erecting the same with necessary scaffolding materials Bolts, nuts including , two coats primer coat etc complete complying with standard specification and as directed by the departmental officers at site work.

Supplying , Fabricating ,erecting and fixing the Hilux 8 mm thick False ceiling or Equivelent Board False ceiling up to a ceiling Height of 4.50 m From Floor Level and scaffolding charges etc complete complying with standard specificatin and as directed by the departmental officers at site of work.

Supplying and fixing the POP impored cornice 3" of approved quality and make including labour forfixing in postion as directed by the Depart mental officers

Venkatesan

T RAJESH