Special repair for House No. 11 B and 12 B at Session Marg Karnal

Amount

Scrapping white wash and colour wash[HSR 8.32(a)]

Dismantling brick work, tile masonry or tile lining and tile terracing . (b) in cement,[HSR 8.5(b)]

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantlled:- (HSR 8.18) a) Door

b) Window

Dismantling white or coloured glazed tiles (to be carefully removed) [HSR 8.38]

Cement Concrete 1:4:8 with stone aggregate 20mm nominal size in foundation and plinth. [HSR 10.38]

Tile terracing with one layer of tiles, 22.86 cm x 11.43 cm x 3.81cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1:3 and top surface to be left clean (HSR 13.14).

Precast chequered tiles of 20 mm thickness in ordinary grey cement without chips laid on 20 mm thick bed of cement course sand mortar 1:3 with neat cement slurry between joints and over the base in floors , treads of steps and landings [HSR 14.45] + Note

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturers like NITCO, KAJARIA, SOMANI, ORIENT, RAK & JOHNSON. (HSR 14.89)

Providing & fixing vitrified tiles of size 600mm x 600mm of approved make in skirting/dados laid in any pattern as specified over base of 12mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturers like: NITCO, KAJARIA, SOMANI, ORIENT, RAK & JOHNSON. (Double charged tiles shall be used as approved by Engineer in charge. (HSR 14.90).

Providing and fixing ceramic tiles / anti skid tile of size 400 mm x 400mm of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, RAK & JOHNSON. (HSR 14.91)

Providing & fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92) b) Size of ceramic Glazed tiles 300 x 450 mm

P&laying Baroda Green marble stone 17mm or above thick in risers of steps, skirting, dado Laid, pillar & wall lining i.e. Matching the grains of marble slab in any patterns as specified over 12mm thick cement sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble i.e. rubbig & polishing. The rates are for all height / story. The sample shall be got approved from EIC (HSR - 14.98)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level ( HSR 11.9)

12 mm thick cement plaster 1 : 4 on walls ( HSR 15.5 )

Painting two coats with synthetic enamel paint in all shades on old wood-work or metalic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.5)

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)].

Cost of aluminium fittings complete for doors and windows such as tower bolts, handles etc. and screws for these fittings (excluding sliding bolts) [HSR 17.72]. a) for single leaf shutter

Factory manufactured wire gauze door and window shutters of commercial hard wood, such as hollocks, champ, chikrassy and chaplash, etc., (non-coniferous timber other teak, conforming to I.S. specification No. 1003, kiln seasoned), with 100 mm wide vetical styles, 150 mm wide lock rail, 200 mm wide bottom rail and wire gauze of 140G or 120G designation including cost of iron hinges, screws, chocks/cleats,stops, nails etc., complete fixed in position (execluding the cost of any fittings, other than specified above but including labour for fixing the same in position) [HSR 17.92 (-)Note (i) under item No. 17.18] ii) 35 mm thick.

Wrought iron and mild steel(using angles, flats ,square bars , tee and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Pressed steel sheet frames (chowkats ), consisting of 2mm thick steel sheet of the specified section,including iron lugs(hold fasts) iron hinges conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame, and cement concrete 1:3:6 for lugs complete (HSR 18.34) a) Door and Window frame of size 89 mm x 50 mm with 40 mm wide single rebate

Door and window frame of size 114 mm x 50 mm with 35 mm wide double rebate

Providing and fixing poly carbonate sheet 1.25 mm thickness on gates & grills excluding the cost of MS framework but including the cost of nut, bolts, welding rods complete in all respect as per direction of engineer-in-charge (HSR 18.43)

Providing and fixing in position best indian make (as approved by the Engineer-in-Charge) European type water closet suit with non-concealed 'P' or 'S' trap with or without vent and all other necessary fittings as fully described in item no. 30.3 above [HSR 30.4 (i)] White

Extra over item Nos. 30.1 to 30.4 and 30.6 for providing and fixing 15 litres capacity low level vitreous china ware cistern complete with flush bend all other necessary fittings instead of C.I. High level cistern complete with fittings. [HSR 30.12 (i)] White

Extra over item Nos. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. [HSR 30.13 (i)] White plastic seat (Solid)

Providing and fixing in position best Indian make (ordinary)lavatory suites, consisting of Lavatory in vitreous chinaware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary. R.S. or C.I. Brackets for building into wall including painting, 32mm C.P. brass waste with C.P brass chain and rubber plug, 15mm C.P. brass screw down pillar tap with jamnuts or couplings best design (as approved by the Engineer-in-Charge). All fittings best Indian make and; to the approval of the Engineer-in-Charge. All brass work chromium plated and complete in all respect including cutting and making good the walls floors and painting of fittings etc. [HSR 30.41] White (iv) Size 550mm x 400mm with one no. tap.

Providing and fixing in position best quality stainless steel sink of size 600mm x 450mm x 200mm size [HSR 30.53]

Providing and fixing in position best Indian make shower with 15 or 20 i/d in-let. [HSR 30.66] c) C.P. brass with revoiving joint

Providing and fixing in position best Indian make Towel rails fixed in with rawl plugs embedded in walls with C.P. brass screws. Complete in all respect including cutting and making good the walls etc. [HSR 30.68] e) C.P. Brass towel ring

Providing and fixing in position glass shelf fixed in with rawal plugs with C.P. brass screws complete including cutting and making goods the walls etc. [HSR 30.69] a) With C.P. brass brackets and guard rail (i) 600 mm x 125 mm

Providing and fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 Nos. chromium plated brass screws and washers over rubber washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) complete including cutting and making good the walls etc. [HSR 30.71] a) Indian make (i) 600 x 450mm

Providing and fixing in position 15mm i/d C.P.brass & bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75] c) Bib cock

Providing and fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of the Engineer-in-charge) [HSR 30.78] ii) Two way

Providing and fixing in position best Indian make flexible tube connection [HSR 30.82 b (iii)] b) C.P. Brass (iii) 15 mm x 450 mm

Providing and fixing in position automatic brass ball valves in tanks [HSR 30.110] a) WITH PEASTIC BALL (ii) 20mm i/d

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K., Supreme make with covers / lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with sutiable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in-Charge. (except civil work). (HSR 30.119) 1000 Ltr. capacity.

Recovery items:- The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Dismantiling of bricks and Removing of Door and windos in the DNIT. In case it is not possible to use this material on the work, the agency can take away this material after approval from employer. This material will be issued at the price quoted by the agency. However the reserve price is as under:- i) Doors @ 800/- Each

ii) Windows @ 500/- Each

iii) Iron Gate @ 2500/- Each

iv) Good tiles @ 5.20/- Each

v) Brick Bats @ 450/- cum Note:- All quantities of the above materials have been worked out on the basis of theoretical quantities laid on this building. However, agency may visit site before quoting rates and assess the extent of retrieved material. There shall be no measurement after actual dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of quoted rate and quantity exhibited in the BOQ shall be made. The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price. Note:- 1. In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make/brand exhibited in HSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items/works at site.

The Quality Coop Society Ltd

The Global Coop L and C Society Ltd