PROVISION OF WEATHER SHELTER NEAR MGR AT AFS AMLA

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed. (7+22)

M&L for hardcore of guage n.exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works (rough finish) complete all as specified and directed.

M&L for RCC in 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundation including rafts footings foundation beams, plinth beam base for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) Quality B) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other end or screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 10 cm but n.exc 15 cm long complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and direcetd.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding on ridge of roof to wall, fixed with self tapping screws complete all as specified and direcetd.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and direcetd. (2+16)

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and direcetd. (5+6)

All as per item No 17 above but one fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed.

All as per item No 17 above but one 3 point 5 Amps switch socket outlet point controlled by one switch on same board complete all as specified and directed.

All as per item No 17 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No. 17 above but using 2.5 sqmm single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLS PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed.

S&F modular switch piano flush type, single pole, one way, 5/6 Amp single module complete all as specified and directed.

S&F modular switch piano flush type, single pole, one way, 15/16 Amp single module complete all as specified and directed.

S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

M&L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 2.5 Sq mm nominal area drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 1.5 Sq mm (nominal area) stranded copper conductor FRLS cable as earth wiring complete all as specified and as directed Note: - Two runs of 2.5 Sqmm cable, one run of 1.5 Sqmm cable and one run of PVC conduit will be measured as one unit.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCB single pople and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S&F MCB single pole rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA 'C' curve complete all as specified and directed.

S & F ceiling fan 230V, 50 Hz AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified and directed.

S & F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of size 4 core x 16 sqmm complete all as specified and directed.

Supply and laying river bed fine sand in trenches/ducts 15 cm under cable and 8 cm above the cable n.exc 1.5 mtr above protection to cable including spreading, levelling and get thick 18 cm after hand punning complete all as specified and directed.

Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cable as in cable protection in trenches over cables perpendicular to direction of cable abutting each other complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level, connecting to GaIvanised earth strip size 25x4 mm dia by means of nuts, bolts, Washers of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC (1:3:6) type C-1 pit with precast RCC cover slab 40 mm thick in PCC (1:2:4) type B-1 reinforced with 6mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing point complete all as specified and directed. Note: - On testing after completion if less than 1 Ohm earth resistance is not obtained the earthling will be redone by the contractor at no extra cost the department.

S&F Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified and directed.

Shri Sai Enterprises (BID ID -3490500)

M/s Shree Ganesh Traders (BID ID -3486770)

M/s Vinod Yadav (BID ID -3488689)

M/s SHAKTI INFRASTRUCTURE (BID ID -3490329)

RAJBAITHE CONSTRUCTION COMPANY (BID ID -3489071)