Upgradation/Renovation of Irrigation Guest House at Kanachak under UT Capex Budget 2025-26

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in mud mortar

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge:1:3:6 or richer mix (i/c equivalent design mix)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repair to plaster of thickness 12MM to 20MM in patches of area 2.sqm and under including cutting the patch in proper shape raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar inclidng disposal of rubbish all complete as per the direction of Engineer in charge.

12MM cement plaster of mix 1:4 ( 1 cement : 4 coarse sand).

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stair

Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Dismantling tile work in floors and roofs laid in cement mortar including cement mortar including stacking material withn 50 Meters lead for thickness of tiles 10MM to 25MM.

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of thenew tiles or brick excluded) within 50 meters lead.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing glazed shutters for doors ,windows and clerestory windows using 4MM thick glass panes including ISI market M.S pressed butt hinges bright finished of required size with necessary screws 9.10.5 second class Kail wood ( 30MM).

Providing and fixing wire guage shutters using galvanized M.S wiere guage of average width for aperture 1:4 MM in both directions with wire of dia 0.63MM for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per directions of 9.28.5 Second class Kail wood ( 30MM)

Providing and fxing panneled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately ,all complete as per directions of Engineer in charge. ( Note : Butt hingss and necessary screws shall be paid separately) : Second class kail wood 30MM.

Providing and fixing panelling or panelling and glazing in panelled or pannelled and glazed shutters for doors windows and clerestory windows ( Area of opening for panel inserts excludng portions inside grooves or rebates to be measured), Panelling or pannelled and glazed shutters 25MM to 40MM thick, plain particle boaard flat pressed 3 layers or graded wood particle board medium density Gradei, IS : 3087 marked.

Applying primiing coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( Hard and soft wood).

Painting with sythetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcxement for RCC work including straightgening cutting bending placing in position and binding all complete. Cold twisted bars.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsArea of slab upto 0.5 sqm).

Sweeper engaged for cleaning of drain lines.

Providing and fxing PVC pipe of 100 MM dia.

P/F PVC bend of size 110MM

P/F single TEE with out door 10MM

Provding and fxing CP soap dish

Provding and fxing CP Towel rain

Provding and fxing CP Cup.

Provding and fxing CP grating

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design.100 mm diameter S.W. pipe

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Engage 2nd class carpenter for various repair works.

Engage labour for demolishing almirah and as helper with carpenter.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 15MM mm dia. nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fxing white vitreious china wash basin with MS bracket pair of 15MM nominal bore CP pillar cock, CP brass waste coupling including PVC waste pipe, PVC connections and others accessories.

Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cockof approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

SProviding and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete..125 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete..100MM

Providing and fixing aluminium tower bolts ISI marked andozed ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screwss etc complete.250x10MM

Providing and fixing aluminium tower bolts ISI marked andozed ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screwss etc complete.100x10MM

Providing and fixing aluminium sliding doors bolts ISI marked andozed ( anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screwss etc complete.250x16MM

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and makinggood the wallswherever required :510x1040mm bowl depth 250mm

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing uplasticized PVC connection pipe with brass unions.15 mm nominal bore

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws

Filling available excavated earth ( excluding rock) in trenches,plinth sides of foundations etc in layers not exceeding 20CM in depth, consolidating each deposited layer by ramming and watering, lead upto 50M and lift upto 1.5M.

Carriage of bricks average 20KM by MT to site of work.

Carriage of sand and stone average distance c10 KM by MT

Supplying and fixing of following sizwes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good tdhe same in case of recessed conduit as required -ISI Marked Anchor/High power/AkG/ equivalent make of of required specification to be approved by the Engineer, in charge -25MM dia.

Wiring for light point/fan point /ceiling fan point /exhaust fan point/call bed point with 1.5sq mm FRLS PVC insulted, copper conductor cable in surface /redcessed medium class PVC conduit, with pioano type switch, phenolic laminated sheet , suitable size M.S box and earthing the point with 1.5sq mm . FRLS PVC insulted copper conductor single core cable etc as required. ( Wire make ISI marked Havells/Anchor/HPL /KEI/Polycab conduit make-ISI marked Anchor/High power/AKG/equivalent make of required specification to be approved by the Enginer, in charge.

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 1x2x1.5sqmm +1x1.5sqmm

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 2x2.5sq mm + 1x2.5sq mm

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 2x6 sqmm + 1x6sq mm

Wiring for circulat/sub main wiring along with earth wire with the following sizes of FRLS PVC insulted copper conductor , single core cable in surface/recessed medium class PVC conduit as required ( Wire make ISI marked havells/Anchor/HPL /KEI/ Polycab) equivalent make of required specification to be approved by the Enginer in charge. 2x10 sq mm

Supplyng and fixing 5Amp to 32Amps rating, 240/415 volets, 10 KA C curve minature circuit breaker of single pole in the existing MCB DB complete with connection=s, testing and commissioning etc as required.Single pole ( Make Havells./Anchor/C&SD/HPL/equivalennt make of required specfication to be approved by the Enginer, in charge.

Supply and fxing following ratings, double pole 40 volts isolator in the existing MCB DB complete with connections, testing and commissioning etc as required 63 Amp ratings ( Make Havells /C&S/HPL /equivalent make to be approved by the Engineer in charge.

Supply and fixing of metal box of following size on the surface/recess with suitable size of phenolic laminated sheet cover in front including painting etc as required 200mm x125 MM x60mm deep.

Supply and fixing of metal box of following size on the surface/recess with suitable size of phenolic laminated sheet cover in front including painting etc as required100MM x100MM x60MM deep

Supplying and fxing 15/16 amp piano type switch on the existing switch box or cover including connection as required. ( Make Anchor/Havells/HPL/Great white/equivalent make of required specification to be approved by the Enginer in charge.

Supplying and fixing 6 pin 15/16 amp socket outlet on the exisiting switch box or cover including connection as required ( Make Havells/HPL/Anchor/Great white /equivalent make of required specification to be approved by the Enginer in charge.

Supply and fixing 5/6 amp piano type switch on the existing switch box or cover including connection as rrequired ( Make Havells/HPL/Anchor/Great whjite/equivalent make of required specification to be approved by the Enginer in charge.

Supply and fixing 3 pin 5/6 amp socket outlet on the exising switch box or cover including connection as required ( Make Havells/HPL/Anchor/Greast white /equivalent make of required specification to be approved by the Enginer in charge.

Supplying and fxing brass batten/Angleholder includng connection etc as required ( Make Havells/HPL/Anchor/C&S/Great white /equivalent make of required specication to be appro.ved by the Enginer, in charge

Supply and fixing two module stepped type electronic fan regulator on the existing modular plastic /switch box including connections but excluding modular plate etc as required ( Make havells/HPL/Anchor SSK /C&S/Great white /equivalent make of required specification to be approved by the Enginer, in charge.

Supplying and drawing of following sizes of FR PVC insulted copper conductor, single core cable in the existing surface /recessed steel/PVC condit as required ( Wire make ISI marked Havells/HPL /Anchor /KEI/Polycab/equivalent make of required specificaition to be approved by the Enginer in charge.( x1.5sqmm )

Providing and fixing 6 SWG dia G.I strip surface or in recess for connection etc required.

Supply & installation of following type of surface mounted /recessed mounted decorative Indoor Linear energy saving, energy efficient LED Lumainiers complete with connection testing and commissioning, Make /( Halonix/Havells/Syska/Bajaj/Great white /Philips/HPL/equivalent make of required specications to be approved by the Enginer in charge. (a 18 to 22 Watt, 220 volets,50Hz,1200mm with rated input 140V to 270V, Lumen efficiency 100 lumens/watt/driver lumens/watt, driver efficiency 90 percent starting voltage 90v ,Thd< ,CRT> 80 CT 6500K, Life 25000 hours, surge 2.5 KV,P.F= 0.95 made of high grade polycarbonate body LED batten complete.

Supply ,installation testing commissioning of 1200Mm sweep ceiling fans complete with blades BEE 3 to 5 start rated engergy efficient ( Make Havells/Anchor/Orient/cromption/UHA equivalernt make of required specications to be aproved by the Enginer in charge.

Supply ,installation testing commissioning of heavy duty 300 MM sweep BEE 3 to 5 star rated engery efficient exhaust fan. Make ( Anchor/Havells/Bajaj/cromption/eqivalent make of required specifation to be approved by the enginer in charge.

Supply, testing and commissioning of water GEYser 25 Litre capacity of approved make like, Bajaj Havells cromption etc.

Supply, testing and comissioning Air conditioner of 1.5 Ton Capacity with 3 star rating or above. Complete Job.