Repairing of farmers training centre building at Silvassa, D.N.H

Amount

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

Providing material and labour for Distempeing (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth.

Providing material and labour for Finishing wall with weather proof exterior mulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Demolition of terrace including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) Brick tile covering.

WATER PROOFING TREATMENT : Cleaning existing Terrace Surface, Providing and laying Waterproofing Treatment in DOUBLE LAYER to Terrace with APP (Atactic Polypropylene polymer) Modified Pre-Fafabricated Five layer Water proofing Membrane, HYDROSTOP of TIKIDAN make, comprising of 1st layer of 3mm thick and Minimum 3.5 Kg / m2 Weight Membrane HYDROSTOP 3 FGP, Upper and bottom surface finished in plastic Polyethylene Film and having Reinforcement of Fibre Glass at Core and 2nd Layer of 3mm Thick and Minimum 3.5 kg/m2 Weight Membrane HYDROSTOP 3 PYM, Upper surface finished in Minerals and Bottom surface finished in plastic Polyethylene film and having reinforcement of Non Woven polyester Matt at core, including a coat of bitumen primer TIKI PRIME S for Bitumen Membranes Manufactured to IS : 3384. Over the dried Primer Coat, Laying APP Membrane HYDROSTOP in DOUBLE LAYER using Butane Torch, the 1st Layer torch Bonded to the Primed Surface followed by Torch Bonding of 2nd Layer to the first, while maintaining the side Overlaps 100mm and END Overlaps 150mm, sealing all overlaps etc. complete, including treatment at all juctions and corners to accomodate stresses with 300mm Wide strips of 3mm HYDROSTOP 3 PYP and treatment over the Vertical Plane upto 200 mm height above the Finished Floor level with 3mm APP Membrane HYDROSTOP 3 PYM, the Waterproofing Membrane terminated by tucking it into the groove made on Vertical Plane, the groove sealed with cement : Sand Mortar, etc. all complete.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cIeat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed

Providing material and labour for fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x16mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x16mm dia, with Providing and fixing S.S. Pipe Handle for door 30cm size on both side of Door shutter, with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing wood work in frames of Doors, windows cleare story windows and othersimilar works wrought, framede and fixed in position. (A) Indian Teak Wood

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- Graded brick bat aggregate 40mm normal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

Providing TMT Bar FE 500 D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

Providing and fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including 3 coats of oil painting to wood work etc.complete.

Providing material and labour for Painting two coats (excluding priming coat) on previously printed steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star Rating of current year (c) for 2 ton capacity

Supplying and erecting approved make Instantaneous type water heater with 3Itr.capacity rust free container housed in ABS plastic body insulated with glass wool / puff insulation and 3 Kw heating elements,adjustable thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 C ) auto reset indication lamps, thermal cut-out, safety valve fusible plug etc. Cat.II

Jignesh K Rathod

HITENDRA A PATEL

Kuvarji B Parmar