REPAIRS TO ROADS AND ROAD FURNITURE AT KV DAD ULHASNAGAR AND ERANGAL UNDER GE NW BHANDUP

Amount

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as specified and directed.

M&L for applying evenly a tack coat with paving bitumen of VG-10 grade @ 5 Kg per 10 Sqm with pressure sprayer over existing black top surface etc, complete all as specified and directed.

M&L for premix bituminous macadam with 4% binder content (paving bitumen of grade VG-30) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, duly rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and vibrating roller etc complete all as specified and directed. Notes: The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing BM. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.37 per Kg

M&L for applying evenly a tack coat with paving bitumen of VG-10 grade @ 3 Kg per 10 Sqm with mechanical pressure sprayer over premix bituminous macadam surfaces etc, complete all as specified and directed.

M&L for Bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed. Notes: The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing BM. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.37 per Kg .

M&L for Bituminous with plastic premix semi dense asphaltic concrete 40mm consolidated thickness with 6% binder content by weight of which 92% to be bitumen of VG-30 grade and 8% to be of waste plastic to be used (plastic should be of only low density polythylene (LDPE) or high density polythylene (HDPE) and not to be heated mare than 180 degree centrigrade while mixing. Waste plastic mixing should be done using dry mixing process as per para 6.1 of IRC : SP : 98-2013 (available on open media). The waste plastic will not be provided by the department and the contractor is directed to refer IRC : 98-2013 and IRC : 111-2009 before quoting the rates. The surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed.

M & L for thermoplastic road marking paint, white or golden yellow, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, not exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions, using thermoplastic application unit etc, complete all as specified & directed.

S&F in replacement reflective Cat Eye (Road stud) of ABS plastic body conforming to INC code 67-3977 having load capacity of 20 Ton (point load) of approx size 110mm x 90mm x 17mm high with reflectors on both sides fixed on road surface with approved adhesive all as per manufacturer's instructions, complete all as specified & directed. Make : 3M290 Series or of make Avery Dennison C-80 Series or ARSDM-01 as approved by the GE.

S&F in replacement convex mirror made of polycarbonate of size 80cm dia (Make : Sun eyes Cat No SE-207 or equivalent as approved by the GE) complete including MS pipe, medium grade, 32 mm bore, 2.00metre high (duly painting of external steel surfaces with 2 coats of synthetic enamel paint over 1 coat of red oxide primer) with suitable fixing accessories such as nuts, bolts, washers etc and inserted in PCC 1:2:4 type B-1 (using 20mm graded aggregate) block of size 300mm x 300mm x 500mm with necessary excavation and disposal of soil as per site requirement, complete all as specified and directed.

S&F Solar Road Stud made out of aluminium housing and precast constrution, solar powered by SIEMENS monocrystal solar panel 2 W 120mA type of battery NI-CD 1.2V 2500m AH & flash rate 2 Hz, view distance over 200 metre fitted with and including 2 Hz, EL 805-3 pieces on each side on 2 ends total 6 pieces LED's, flashing upto 12 hours of light at night and solar battery automatically charge in day / sun light duly fixed with cement and hardner, 125 x 125 x 85mm in red/yellow colours, Make: SOLAR/SIMPSON/EL 805A/ALEXIS 1901/DIGTMAX/3M.

S&F in repairs metal guide post delinators of size 1000 x 110 x 5 mm with twin reflectors, made out of PVC pipe 51 mm dia & 2 plates of plastic metal of dimention 302mm x 167mm fitted with 2 Nos of 110mm dia high reflectivety reflectors and 2 Nos 70 x 23mm rectangular reflectors on each side for excellent reflectivety in dark hours, complete all as specified and directed, Make : Dark Eye Guide post Cat No. Da 74 or equivalent as approved by the GE.

RS Enterprises

Genius Construction Co.