PROVN OF 06 CONSTRUCTIONAL STAFF QUARTERS AT COLABA UNDER GE (P) (NW) NO 2 MUMBAI

Amount

Surface excavation not exc 30 cms deep and averaging 15 cms deep and getting out in soft/ loose soil complete all as specified and as directed by Engr-in-charge.

Excavation in trenches not exc 1.50m wide and not exc 1.50m in depth; for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and getting out in hard/ dense soil complete all as specified and as directed by Engr-in-charge.

Returning /filling in including spreading, levelling, watering and well ramming in layers not exc 25 cms in soil complete all as specified and as directed by Engr-in-charge.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

Material and labour for hardcore broken stone or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15mm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge.

Material and labour for cement concrete (1:4:8) type D-2 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for design mix concrete of grade M-30 in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for design mix concrete of grade M-30 in columns, pillars, piers, posts and struts complete all as specified and as directed by Engr-in-charge.

Material and labour for design mix concrete of grade M-30 in slabs supported on walls complete all as specified and as directed by Engr-in-charge.

Material and labour for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc 200mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc 10 cms and not exc 20 cms in rough finished surfaces of concrete complete all as specified and as directed by Engr-in-charge.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

Material and labour for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

Material and labour for AAC block work, straight or curved on plan exc 6m mean radius, built in ready mix jointing mortar 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 10mm thick in CM 1:6 on concrete /wall surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 5mm thick in CM 1:4 mixed with WPC at 3% by weight of cement on concrete wall surfaces over 10mm thick CM 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note: WPC to be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed by Engr-in-charge.

Material and labour for provision of polymeric water proofing treatment to sunken RCC floor description as under complete all as specified and as directed by Engr-in-charge:- (a) Preparation of RCC floor surfaces and providing 15mm thick cement plaster in CM 1:4 mixed with water proofing compound as per manufactures instruction and applying bitumenous based primer conforming to IS-3384-1986 @ 0.3 Kg/sqm on prepared surface till the surface is properly impregnated. (b) Applying one coat hot air blown bitumen of 85/25 grade at the rate of 1.2 Kg/sqm. (c) Material and labour for laying of polymeric water proofing membrane weighing not less than 3 Kg/sqm consisting of centre core of minimum 90 micron HM HDPE processes on both sides with a high quality polymeric asphaltic mix with further protected with thermofusible HM HDPE film with a over lap of 100mm on both sides and ends. (d) Applying one coat of hot bitumen of 85/25 grade @ 1.2 Kg/sqm.

Material and labour for loose filling of broken brick bats of gauge 80 to 150mm as in sunken floor complete all as specified and as directed by Engr-in-charge.

Material and labour for cement concrete (1:3:6) type C-2 (Using 40mm graded stone aggregate) in mass concrete (filling in sunken floor) complete all as specified and as directed by Engr-in-charge.

Material and labour for plain cement concrete type B-1 (1:2:4) (Using 20mm graded stone aggregate), as in copings and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work as required complete all as specified and as directed by Engr-in-charge.

Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 7mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed by Engr-in-charge.

Material and labour for providing and fixing 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed by Engr-in-charge.

Material and labour for 75mm thick, cement concrete type C-2, 1:3:6 (Using 40mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement as in plinth protection including filling of joint with bitumen and sand in the ratio 1:2 complete all as specified and as directed by Engr-in-charge.

Material and labour for providing 75mm thick cement concrete type D-2 (1:4:8) (Using 40mm graded stone aggregate) as in sub floor, sub base of floor complete all as specified and as directed by Engr-in-charge.

Material and labour for vitrified ceramic tiles light shade polished (square/ rectangular) of 10mm thick, area of each tile not exc 0.36 sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for vitrified ceramic tiles light shade polished (square/ rectangular) of 10mm thick, area of each tile not exc 0.36 sqm as in skirting /vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 10mm thick rendering in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square /reactangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm, in floors etc., set and jounted in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed by Engr-in-charge.

Material and labour for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-charge.

Material and labour for machine cut cudappah stone slab 20-25mm thick over cement screed base (below cooking platform), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-charge.

Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of mangalore pattern of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, fastening and heavy bracket framing (beam, tee, angle, channel or flat sections), including distance pieces, cleats etc., including cutting, welding etc., confirming to Fe – 410 – W(Gde E - 250) quality 'B' complete all as specified and as directed by Engr-in-charge.

Supply and fix for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc., confirming to Fe – 410 – W (Gde E - 250) quality 'B' complete all as specified and as directed by Engr-in-charge.

Supply and fix for decking sheet 0.80mm thick made of corrosion resistant complete all as specified and as directed by Engr-in-charge.

Material and labour for applying two coats of acrylic distemper over one coat of primer over 1mm thick wall care putty to new plastered wall surfaces inluding preparation of surfaces complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new or previously untreated wall surfaces and applying two coats of acrylic base weather shield paint (1st quality) over one coat of exterior grade primer including complete all as specified and as directed by Engr-in-charge.

Material and labur for applying two coats of synthetic enamel paint on steel and iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and as directed by Engr-in-charge.

Supply and fix for 10mm thick toughened glass in varandah /railing complete all as specified and as directed by Engr-in-charge.

Supply and fix for 6mm thick asbestos plain cement sheets fixed with coach screws and washers as in roof covering, walls etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc., overall size 495x420mm with bowl size 410x330x160mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for vitreous china wash down water closet pan (pedestal pattern), white, fixing bolts, (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engr-in-charge.

Supply and fix for plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix for 10 ltrs capacity PVC flushing cistern white valveless shyphonic action type low level with inlet, ball valve, float valve and handle including bracket and flush pipe fixed to wall complete all as specified and as directed by Engr-in-charge.

Supply and fix for wash hand basins, vitreous china, white, flat back, size 630x450mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and as directed by Engr-in-charge.

Supply and fix for brass CP wall mixer 15mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm bore bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm bore bib taps, long body, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and fix for 15mm bore angular stop valves, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge.

Supply and fix for health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge.

Supply and fix for brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed by Engr-in-charge.

Supply and fix for toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for soap dish, vitreous china, white, approxmate size 160x160x90mm, fixed to plug with chromium plated brass screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and as directed by Engr-in-charge.

Supply and fix for towel ring of PTMT, fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90 gram) complete all as specified and as directed by Engr-in-charge.

Supply and fix for 600mm long PVC connection with two Nos PTMT nuts internally threaded and PVC washer suitable for 15mm bore pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fix for peg set of three complete all as specified and as directed by Engr-in-charge.

Supply and fix for kitchen plate rack of size 900x200x600mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for hanger of size 1200x600mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 40mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 50mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 25mm bore galvanised steel water tubing medium grade with and including all fittings and laid in trenches complete all as specified and as directed by Engr-in-charge.

Supply and fix for 40mm bore galvanised steel water tubing medium grade with and including all fittings and laid in trenches complete all as specified and as directed by Engr-in-charge.

Supply and fix for 50mm bore galvanised steel water tubing medium grade with and including all fittings and laid in trenches complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC pipes of outer diameter 20mm, SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and as directed by Engr-in-charge.

Supply and fix for 1000 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part–I and hoisted, fixed in position including tank nipple and other required accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix for ball brass valves 25mm size, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix for anodised aluminium frame powder coating (Minimum thickness of powder coating 50 micron) for door, window and ventilator with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for anodised aluminium powder coating of any colour window and ventilator shutter fixed type /sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for anodised aluminium grill 10mm thick including rubber packing and fixing arrangement complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick figured glass, pin head type glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge.

Supply and fix for 30mm thick flush shutters, solid core construction, with block boards core and plywood face panels, commercials type on both side complete all as specified and as directed by Engr-in-charge.

Supply and fix for mild steel flat iron 25x3mm as in band, straps, hold fasts etc., and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed by Engr-in-charge.

Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engr-in-charge.

Supply and fix for 30mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement complete all as specified and as directed by Engr-in-charge.

Supply and fix for 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm long butt hinges, medium weight cold rolled mild steel complete all as specified and as directed by Engr-in-charge.

Supply and fix for 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-charge.

Supply and fix for 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-charge.

Supply and fix for 150mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed by Engr-in-charge.

Supply and fix for 300mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed by Engr-in-charge.

Supply and fix for 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed by Engr-in-charge.

Material and labour for 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as in linings, panelling, kitchen cabinets, similar location complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new or previously untreated wood and wood base surfaces of any description, not otherwise described exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge.

Material and labour for stainless steel magnetic hinges 19mm long 'L' type suitable for kitchen cabinet shutters complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm brass handles, fancy type suitable for kitchen cabinets complete all as specified and as directed by Engr-in-charge.

Material and labour for PVC (SWR) floor trap of 75mm outlet plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge.

Material and labour for PVC (SWR) multi floor trap of 75mm outlet with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge.

Material and labour for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC soil or waste pipe 110mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC soil or waste pipe 75mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor/ wall complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC (SWR) bend in any radius 110mm dia bore with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC (SWR) bend in any radius 75mm dia bore with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC (SWR) branch pipe (single Y) equal or unequal 110mm dia bore with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC (SWR) branch pipe (single Y) equal or unequal 75mm dia bore with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC (SWR) junction single (single T) equal or unequal 110 mm dia bore with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for UPVC (SWR) junction single (single T) equal or unequal 75mm dia bore with access door complete all as specified and as directed by Engr-in-charge.

Supply and fix for PVC (SWR) vent cowl of 75mm bore complete all as specified and as directed by Engr-in-charge.

Supply and fix for PVC (SWR) vent cowl of 100mm bore complete all as specified and as directed by Engr-in-charge.

Supply and fix for 32mm size (dia of discharge pipe) waste coupling of PTMT half or full threaded (minimum weight 45 grams) complete all as specified and as directed by Engr-in-charge.

Supply and fix for mild steel chromium plated aluminium anodized tubular curtain rails, 20mm dia, with fixing brackets, stops, rollers etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for low density polyethylene (LDPE) pipes 32mm bore of pressure rating 6 kgf/sqcm complete all as specified and as directed by Engr-in-charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for providing cement concrete (1:2:4) type B1 (Using 20mm graded stone aggregate) as in copings, benching to manholes, water troughs and the like including weathering slighty rounded or chamfered angles and throating, and including necessary form work complete all as specified and as directed by Engr-in-charge.

Material and labour for extra forming fair finished drain or channel 30 cms inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for precast cement concrete type B-1(1:2:4) (Using 20mm nominal size graded crushed stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces fair faces, including chamfers, weatherings, throating etc., and setting in cement mortar (1:6) with joints to match complete all as specified and as directed by Engr-in-charge.

Material and labour for reinforced concrete pipes 150mm dia, class NP3, laid and jointed with collars complete all as specified and as directed by Engr-in-charge.

Material and labour for cement concrete (1:3:6) type C2 (Using 40mm graded stone aggregate) as in concrete bed to drain pipes 150mm bore, including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engr-in-charge.

Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc 25 cms watering and removing surplus soil to a distance not exc 50m and making good surface as in hard/ dense soil complete all as specified and as directed by Engr-in-charge.

Supply and fix for MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint complete all as specified and as directed by Engr-in-charge.

Material and labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nuts, not exc 5 cms long and dia of bolt 11 to 15mm complete all as specified and as directed by Engr-in-charge.

Material and labour for providing 100mm thick cement concrete type D-2 1:4:8 (Using 40mm graded stone aggregate) as in sub floor, sub base of floor complete all as specified and as directed by Engr-in-charge.

Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-charge. Note: Only punned thickness shall be measured for payment.

Material and labour for 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006, M-35 grade as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Black colour), 1100 volts grade cable, FRLS, passing through PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface and PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc., including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following complete all as specified and as directed by Engr-in-charge:- One light point controlled by one way switch

One Ceiling fan/ exhaust fan point controlled by one way switch

Bell point controlled by one way switch

TV point

Internet point

One 3 pin socket outlet, 5 Amps on the same board with other switches

One 3 pin socket outlet, 5 Amps on the Independent board

All as per item No. 127.00 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15/16 Amps on the independent board.

Material and labour for ceiling rose, 3 phase / PVC /polycarbonate, isolated body complete all as specified and as directed by Engr-in-charge.

Material and labour for modular switch, 1 way 6 Amps, 1 module complete all as specified and as directed by Engr-in-charge.

Material and labour for modular bell push, 1 way 6 Amps, 1 module complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular socket 6 Amps, 2 /3 pin, combined, 2 module complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular socket 6/ 16A, 6 pin, combined, 2 module complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular switch, 1 way 16 Amp, 1 module complete all as specified and as directed by Engr-in-charge.

Supply and fix for TV socket complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular type 1 module telephone socket with shutter complete all as specified and as directed by Engr-in-charge.

Supply and fix for bell multi music type AC, 230 Volts, single pole complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED lights fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED security/ street light fittings 25W wall mounting type extruded metal /alluminium body, and electronic LED driver, etc., with all accessories internal prewired and including connecting up with 2 core flexible copper conductor cable with suitable size etc., and fix GI pipe bracket 25mm dia 0.9m long and 2 set of clamps made out of 30x5mm MS flat and fixed with anchor bolt complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED light fitting mirror type with high out put diffuser 2 feet, 1x10 watt, 220V, AC decorative type with driver, holder including LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge.

Supply and fix for stepped modular type electronic fan regulator FSC type 2M complete all as specified and as directed by Engr-in-charge.

Supply and fix for ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep and connecting up including provision of three core flexible copper wire of size 23 /0076 rom ceiling rose to ceiling fan complete all as specified and as directed by Engr-in-charge.

Supply and fix for exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, copper winding of sweep 300mm and connecting up including provision of three core flexible copper wire of size 23/0076 rom ceiling rose to exhaust fan complete all as specified and as directed by Engr-in-charge.

Supply and fix for single pole and neutral enclosure with a three pin and earth plug and socket complete with one single pole MCB 10 Amps, SP 10 KA complete all as specified and as directed by Engr-in-charge.

Supply and fix for rating 240 V, 10 KA 'C' curve, miniature circuit breaker (MCB) of single pole and 6 Amp to 32 Amp current carrying capacity in the MCB DB with connection, testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fix for rating 240 V, 10 KA 'C' curve, miniature circuit breaker (MCB) of single pole neutral and 40 Amp to 63 Amp current carrying capacity in the MCB DB with connection, testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fix for double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200 Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/ wires complete all as specified and as directed by Engr-in-charge.

Material and labour for earthing to OH/ sub station with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of MES schedule pt-I 1991, GI earth lead wire protected by GI pipe 15mm dia light grade and connected to earth test point including excavation in any type of soil, returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and as directed by Engr-in-charge.

Supply and fix for sub main wiring with two single core (Red and Black Colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 2.5 sqmm and including drawn through PVC copper conductor, single core cable in PVC conduit pipe 25mm dia including accesssories (ISI marks), one run of single core (Green colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 2.5 sqmm for earth continuity wire and connected of common earth dolly complete all as specified and as directed by Engr-in-charge.

Supply and fixing for AC sub main wiring with two single core (Red and Black Colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 4 sqmm and including drawn through PVC copper conductor, single core cable in PVC conduit pipe 25mm dia including accessories (ISI marks), one run of single core (Green colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 4 sqmm for earth continuity wire and connected of common earth dolly complete all as specified and as directed by Engr-in-charge.

Supply and fix for meter sub main wiring with two single core (Red and Black Colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 6 sqmm and including drawn through PVC copper conductor, single core cable in PVC conduit pipe 25mm dia including accessories (ISI marks), one run of single core (Green colour) PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 6 sqmm for earth continuity wire and connected of common earth dolly complete all as specified and as directed by Engr-in-charge.

Supply and fix for meter panel board, indoor, 2mm thick enclosed including 6 Nos single phase prepaid energy meter conforming IS 16444, 6 Nos SPN MCB 32 Amps, one 40 Amp TPN MCB and all inter connection using copper cable complete all as specified and as directed by Engr-in-charge.

Excavating in trenches, in soft/ loose soil not exc 1.5m wide and not exc 1.5m in depth for foundation, etc or not exc 10 sqm on plan and not exc 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out complete all as specified and as directed by Engr-in-charge.

Material and labour for modular type sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and as directed by Engr-in-charge.

Supply, laying, jointing and testing in trenches /ducts or fixing to pole/ wall or passing through pipe XLPE insulated, armoured, heavy duty electric cable size 50 sqmm x 4 core with aluminium conductor 1100 V grade complete all as specified and as directed by Engr-in-charge.

Supply and fix for galvanised steel tubing light grade 80mm bore laid in trenches or fix to wall /hole with fitting as required for cable protection complete all as specified and as directed by Engr-in-charge.

Supply and fix for galvanised steel tubing light grade 40mm bore laid in trenches or fix to wall /hole with fitting as required for cable protection complete all as specified and as directed by Engr-in-charge.

Cutting of existing CI pipe in position for inserting of tee, bend collar other type of CI fitting for addition/alternation of existing system for following sizes complete all as specified and as directed by Engr-in-charge:- 150mm bore

100mm bore

Supply, fixing and laying only GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/ wall /ceiling/ floor of following size complete all as specified and as directed by Engr-in-charge:- 80mm bore GI pipe

50mm bore GI pipe

40mm bore GI Pipe

25mm bore GI pipe

Supply and fix for gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixing for following sizes complete all as specified and as directed by Engr-in-charge:- 50mm bore

25mm bore

Supply and fix for 40mm dia brass ferrules screwed both end for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for 25mm dia brass ferrules screwed both end for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and fix for Kitchen cupboard (6'X2'X1’) wooden (12mm BWR Ply both side laminated, 50mm Hinges SS, 75mm Handel SS, Main Gate Shutter) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Bed MS (6’x5’) (Black power coating + Hydraulic open type storage) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Side table MS (12”X15”) MS Black powder coating, one drawer, openable shutter) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix for Cupboard MS (6'X4'X2’) (Grey powder coating with total 3 Door Shutters in which one shutter will be provided with Mirror on it.) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix for Wall hang T.V. unit wooden of size (4’x1.5’x1’) (18mm ply BWR Type both side laminated, one 10mm glass shelf, back side 6mm ply BWR, 10mm Glass Top) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Chair MS, (MS black powder coating with cushion) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Sofa set MS 3 seater with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Dinning table MS (4’X2.5’), (MS Black powder coating, Top 10mm thick toughen glass) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Mattress (6’X5’X4.5”) with all accessories complete all as specified and as directed by Engr-in-charge.

Supply only Center table (3’X2’) (MS Black powder coating, Top 10mm thick toughen glass) with all accessories complete all as specified and as directed by Engr-in-charge.

SHREE JAGDISH FURNITURE CO.

ORIENT ELECTRIC CO

Idustrial products India

Nilesh Construction

shubham construction

Garima Construction Co

jay enterprises

Darpan Construction