8547(A) PROVISION OF CERTAIN MINOR WORKS AND CERTAIN REVENUE WORKS AT AFMC PUNE UNDER GE (CENTRAL) PUNE

Amount

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out any type of soil, or any type soft rock.

Excavating post holes (or similar holes) each n.exc0.5 cu.m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm complete all as specified and as directed.

M&L for Cement concrete type C2, 1:3:6 (using 20mm graded stone aggr) as in foundations, filling and mass concrete complete all as specified and as directed

M&L for PCC in 1:4:8 type D2(using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L for Moorum/red bajri filling under floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63 mm, using Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for 75mm thick Cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) as in sub base course.

M&L for nominal Mix RCC, Type Type B1 1:2:4 (20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete.

M&L for nominal Mix RCC, type Type B1 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, lintels, columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies, deck slabs etc. or in similar articles.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M & L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

Ditto- all as per item No- 14 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soils

Removing excavated materialn exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point as in soils

M&L for composite type decorative masonary, block- in-course and ashlar masonry,Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in in CM 1:6 NOTE : The composite masonary is to be carried out simulteneousaly one couse fly ash brick & Ashlar masonary

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:3 incl dismatling old masonary built in CM

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonry, regular coursed or brought upto courses

Extra over fine tooled face work hammer dressed facings, with maximum depression on face from straight edge held against the dressed surface n. exc 20 mm; to block-in-course ashlar masonry

M&L for Flush pointing to block in squared rubble masonry, coursed or uncoursed course or ashlar masonry or concrete block walling

M&L for telephonic black 18mm to 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platfoms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantaling Stone slabs and tiles laid, bedded and pointed in cement mortor of any description or thickness in floors, aprons etc.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

S &F framed work as in doors or gates of with tube section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and decorative cast iron artical etc.

M&L for 15mm thick rendering in CM 1:4 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement

M&L for applying two coats of cement based paint to walls over one coat of primer including preparation of surfaces complete all as specified and as directed

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde E-250) quality- A complete all as specified and as directed

Supply and fix steel hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding door fixed with angle cleat or other connecting plates etc complete conforming to IS-4923-1997 of FE 410-W (Gde-E-250) quality A complete all as specified and as directed

S&F 0.50 thick (total coated thickness) pre-colour, pre-profiled (Galvalume /Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

S & F pre - painted galvalume aluminium zinc coating GI based plain steel sheeting 0.5 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley,gutters,bridge board,roof covering / cladding to wall, fixed with self tapping screwes complete all as specified and directed.

M & L for 40mm thick Plain Cement Concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and as directed.

S&F glass dividing strip 3mm thick and 38mm wide, as in floor complete all as specified and as directed.

M & L for 30mm thick sand cushioning/sand filling under pavement incl watering, consolidationg with clean dry sand , complete all as specified and as directed.

M&L for 80 mm thick Machine Pressed Precast concrete interlocking Paver block glossy look any shape and size confirming to IS 15656 2006, M-40 grade with grey cement and pigment all as spd and directed

M & L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with grey cement and pigment over 15mm thick screed in CM 1:6 complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

S&F MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete as in cover of drain to enable vehicular access

Supplied and fixed Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 15cm and n exc 22.5cm long and Diameter 16 to 20mm all as specified and directed

S&F Joist, channel(, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or zink chrome primer on new steel urfaces al as specified.

Material and Labour for point wiring complete (for simple and modular type) with 1.5 sqmm single core PVC insulated heavy duty ISI Marked, FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through PVC conduit not less than 20mm dia/PVC casing and caping with all accessories like tee, straight joint, Bend, tee etc on waals/ ceiling alongwith provision of PVC insulated FRLS copper conductor, 1.5 sqmm for earth continuty conductor and connected to common earth dolly including suitable size of sheet metal Box (Simple/ Modular sunken box fixed and flushed inside the walls, with laminated sheet top cover/ modular cover plate for housing the switches, sockets outlets, fan regulators etc complete all as per directed by Engineer-in-Charge for the following :- (a) One light/ Exhaust Fan/ Ceiling fan point controlled by one switch.

Supply and fixing Exhaust fan, Domestic type, AC single phase 230 volts for size 200mm sweep including fixing arrangement (like plywood/cutting of window grill), nut, bolts, washer etc with necessary electric connection with suitable copper wire from ceiling rose complete all as specified and directed. Freshee MK II of Bajaj or equivalient techno commecial model

Supply and fixing Exhaust fan, PVC body, AC single phase 230 volts for size 200mm sweep including fixing arrangement nut, bolts washer etc with necessary electric connection with suitable copper wire from ceiling rose complete all as specified and directed.

Supply and Fixing ceiling rose ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and directed.

Supply and Fixing switch, single pole one way 5 Amp 230 Volt ISI mark complete all as specified and directed.

Supply and Fixing switch, single pole Modular one way 5 Amp 230 volts ISI marked complete all as specified and directed.

M & L for earthing as per IS: 3043 with galvanised steel earth plate electrode 600 x 600 x 6.0 mm buried directly in ground (earth pit not less than 2.25 m deep below normal ground level), with top edge of the plate not less than 1.5 metrebelow normal ground level connected to galvanized iron wire 4mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal/ coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/ screened funnel and making brick masonry finished chamber of internal size 300mm x 300mm x 300mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refiling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing of earth resistance as required Note : Earthing lead/G.I Earth wire upto 7.5metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately.

Making hole in the existing wall any type and size (without damaging the existing stucture) of size Round/ square to accommodate the 300 Sqmm exhaust fan, duly plastered and making good the disturbed sufaces matched with existing finished complete all as per specified and directed by Engineer-in-Charge.

Supply and Fix as in repai of Exhaust fan louver for size 300mm dia exhaust fan of shape (round/ square) as directed by Engineer-in-Charge.

L.T Associate (BID ID -3186295)

ANIL CONSTRUCTION CO. (BID ID -3187281)

Suma Construction (BID ID -3187257)

M/s.BAJRANG CONSTRUCTION (BID ID -3182338)

K.K.Enterprises (BID ID -3187146)

shiva traders (BID ID -3184565)

Gurukrupa Enterprises (BID ID -3186170)