Balance work for the C/O PHC Building at Jangi in District Kinnaur HP (SH--Building portion and WS and SI works

Amount

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all lenghth and width, including dressing of sides and ramming of bottoms, lift upto 1.5 m (one point five meter), including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts in all kinds of soil , including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation tranch of required width of pipes cables etc., Pipes, cables etc., not exceeding 80 mm ( eighty milimeter) dia complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form work complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Foundations, footings, bases of columns.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access plat form

Shelves (In cast situ)

Edges of slabs and break in floor and walls inder 20cm (twenty centimeter) wide

Stairs, (excluding landings) except spiral-staircases.

Columns, Piers, abutments, pillars, posts and struts.

Providing and laying in position reinforced cement concrete, 1:1.5:3 (one cement : one point five coarse sand : three graded stone ) aggregate 20 mm (twenty millimeter) nominal size), excluding the cost of centering, shuttering, finishing and reinforcement in foundation and footing, basses of columns and the like and mass concrete,- All work up to plinth level complete, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and layng in position reinforced cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone) aggregate 20 mm (twenty millimeter) nominal size, excluding the cost of centering, shuttering, finishing and reinforcement in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. all work above plinth level complete up to all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position reinforced cement concrete 1:1.5:3 (One cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty milimeter) nominal size) excluding the cost of centering, shuttering, finishing and reinforcement in beams, suspended floors, roofs having slope up to 15° (fifteen degree), landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level, complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering up to plinth level complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cement concrete grade 1:5:10 (one cement : five coarse sand: ten graded stone aggregate) 40 mm (forty millimeter) nominal size.

Cement concrete grade 1:4:8 (One Cement : four coarse sand) : eight graded stone aggregate) 40 mm (fory millimeter) nominal size.

Cement concrete grade 1:2:4 (One Cement : two coarse sand : four graded stone aggregate)40 mm (forty millimeter) nominal size.

Cement concrete grade 1:3:6 (One Cement : three coarse sand : six graded stoneaggregate) 40 mm (forty millimeter) nominal size.

Providing, hoisting and fixing precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (one cement : three coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm twenty milimeter) nominal size), complete upto all floor level,including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying damp-proof course 50mm (fifty milimeter) thick with cement concrete 1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20mm (twenty milimeter) nominal size, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Making plinth protection 50mm (fifty milimeter) thick of cement concrete 1:3:6 (One cement : Three coarse sand: Six graded stone aggregate 20 mm (twenty milimeter) nominal size) over 75mm (Seventy five milimeter) thick bed of dry brick ballast 40 mm (forty milimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm (twenty millimeter) nominal size upto plinth level with : cement mortar 1:6 (one cement : six coarse sand), complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in Cement mortar 1:4 (one cement : four coarse sand), complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Deodar wood 1st class) complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 35 mm (thirty five milimeter) thick ISI (Indian Standards Institute) marked factory made flush doors shutters conforming to IS : 2202 (Part I) (Indian Standard : two thousand two hundred two part one) non-decorative type, commercial board phenol bonded termite resitant and water proof core of black board construction with frame of 1st class hard wood and well matched commercial 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm (thirty five milimeter) thick i.e. ISI ( Indian standard institute) marked Stainless Steel but hinges with necessary screws, complete all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters using galvanised M.S. ( mild steel) wire gauge of I.S. gauge designation 85 G. (eighty five gram) with wire of dia 0.56 mm (Zero point fifty six millimeter) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws . 2nd class deodar wood, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm (eighteen milimeter) thick, 150 mm (one hundred fifty milimeter) wide pelmet of flat pressed 3 (three) layer of graded wood particle board medium density grade I, IS: 3087 (Indian standard: three thousand eighty seven) marked, including top cover of 6mm (six milimeter)commercial ply wood conforming to IS 303 (Indian standard : three hundred three) BWR grade, nickle plated M.S. Pipe 20 mm dia (twenty milimeter diameter). (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into three milimeter) M.S. Flat 10 cm (ten centimeter) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (Hundred milimeter into forty milimeter into forty milimeter) on both inner side of pelmet and rawl plugs 75 mm (seventy milimeter) long etc. complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick commercial board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc. complete), complete up to all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12 mm (twelve milimeter) thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm (forty milimeter) thick frame complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6mm Cement thick plaster on cement concrete or reinforced cement concrete work with a Cement mortar 1:3(one Cement: three fine Sand) complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (fifteen milimeter) cenment plaster on rough side of single or half brick wall of mix: 1:4 (one cement : four coarse sand) complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (fifteen milimeter) Cement plaster on the rough side of single or half brick wall of mix: 1:6 (one cement: six fine sand)complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (fifteen milimeter) Cement plaster in single coat on fair side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeter) in girth and finished even and smooth. complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (twenty milimeter)thick Baroda green marble having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty milimeter) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all level complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Precast terrazzo tiles 22 mm (twenty two milimeter) thick with graded marble chips of sizes upto 12 mm (twelve milimeter), laid in floors, and landing , jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete , on 20mm (twenty milimeter) thick bed of cement mortar 1:4 (one cement : four coarse sand)Light shade pigment using white cement, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6 mm (Six millimeter) thick White glazed tiles dado 30x45 cm (thirtry into forty five centimeter) in skirting risers of steps and dado 12mm (Twelve milimeter) thick cement mortar 1:3 (One cement : three sand) and jointed with cement slurry omplete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Chequered terrazo tiles 22 mm (twewnty two milimeter) thick with graded marble chips of size up to 6 mm (six milimeter) in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm (twenty milimeter) thick bed of cement mortar 1:4 (one cement : four coarse sand) : Light shade pigment using white cement upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622 (Indian Standard fifteen thousand six hundred twenty two) of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killograme/square meter) including grouting the joints with white cement and matching pigments etc., complete at all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Precast terrazzo tiles 22 mm (twenty two milimeter) thick (with graded marble chips of sizes upto 12mm (twelve milimeter) in skirting and risers of steps not exceeding 30 cm (thirty centimeter) in height in height on 12 mm (twelve milimeter) thick cement plaster 1:3 (one cement: three sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles (wherever required) including rubbing and polishing complete with tiles of complete at all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Vetrified tiles in diffrent sizes (thickness to be specified by manufacture) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS : 15622 (Indian Standard fifteen thousand six hundred twenty two)of approved make in all colours and shade in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (One Cement : three Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilograme/square meter including grouting the joint with white cement and matching pigment etc., complete at all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 60mm (sisty milimeter) thick faciory made cement concrete interlocking paver block of M -30 (M-Thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty milimeter) thick compacted bed of coarse sand, filling the joints with line sand etc. complete at all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(A) Steel reinforcement (TATA/SAIL/JINDAL PANTHER/RINL) for R.C.C. (Reinforcemetn cement concrete) work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wire complete upto plinth level Thermo-Mechnically Treated bars of grade FE-500D (Fe-Five hundred D) or more steel bars complete upto all floor, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

(B) Steel reinforcement (TATA/SAIL/JINDAL PANTHER/RINL) for R.C.C. (Reinforcemetn cement concrete) work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wire complete above plinth level Thermo-Mechnically Treated bars of grade FE-500D (Fe-Five hundred D) or more steel bars complete upto all floor, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. (miled steel)(TATA/SAIL/Apollo/JSW Make) grills of required pattern in frames of windows etc. with M.S. (miled steel) flats, square or round bars etc. including priming coat with approved steel primer all complete, Fixed to steel windows by welding complete upto all floor, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size type foot rests 580x440 mm (five hundred eighty into four hundred forty millimeter) with integral, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type of CERA, HINDWARE, PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete upto floor all level, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. (Water closet)pan with ISI marked white solid plastic seat and lid, hindware or cera EWC No 20049 (twenty thousand forty nine) snow white shade complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimeter) diameter C.P. / S.S. Jet with flexible tube upto 1.00 (one point zero zero)metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquar Opal series) complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) C.P. brass pillar taps, 32 mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred milimeter) with a pair of 15 mm (fifteen millimeter) C.P. brass pillar taps complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) (Indian standard three hundred four (eighteen by eight) kitchen sink as per IS:13983 (Ondian standard:thirteen thousand nine hundred eighty three) with C.I. brackets and stainless steel plug 40 mm (forty milimeter) including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 510x1040 mm ( five hundred ten into one thousand forty milimeter) bowl depth 200 (two hundred milimeter) including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimeter) diameter P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe. complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, 100 mm (Hundred millimeter) inlet and 100 mm (Hundred millimeter) outlet, Sand Cast Iron S&S as per IS- 3989 (Indian standard: three thousand nine hundred eighty nine), complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI (Indian standard Institute) marked including fixing with approved adhesive etc. complete complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75 mm (Seventy five millimeter) diameter

110 mm (One hundred ten millimeter) diameter

Providing and fixing PVC (Polyviny chloride) door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI (Indian Standards Institute) marked complete including fixing with approved adhesive etc. complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75 mm (Seventy five millimeter) diameter

100 mm (One hundred millimeter) diameter

Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75 mm (Seventy five millimeter) diameter

100 mm (One hundred millimeter) diameter

Providing and fixing PVC (Polyviny chloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked insertion rubber washer 3mm (three milimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75 mm (Seventy five millimeter) diameter

100 mm (One hundred millimeter) diameter

Providing and fixing PVC (Polyviny chloride) collars ISI (Indian Standards Institute) marked including fixing with approved adhesive etc. complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75 mm (Seventy five millimeter) diameter

100 mm (One hundred millimeter) diameter

Providing and fixing PVC clamps ISI marked of approved design with steel screw and rawal plugs etc. complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75 mm (Seventy five millimeter) diameter

100 mm (One hundred millimeter) diameter

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 (Indian standard-fifteen thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to with stand temperature up to 80°C( eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge, Concealed work, including cutting chases and making good the wall etc. 20mm (twenty milimeter) nominal size of Kitchen make complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

1216 (16 mm (sixteen milimeter) OD) pipe

1620 (20 mm (twenty milimeter )OD) pipe

2532(32 mm (thirty two milimeter )OD) pipe

Providing and fixing gun metal gate valve with C.I. (Cast iron) wheel of approved quality (screwed end) make of Leader, Zoloto, Kilbum, CIM, Valves Sant , complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

32 mm (thirty two milimeter) nominal bore

20 mm (twenty milimeter) nominal bore

Providing and fixing 20 mm (twenty millimeter) nominal bore, size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal/Tata make complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimeter) nominal dia CP (chrome plated) Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge make of Jal, Jaquar Parryware, Hindware, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) make of Atul, Modi Guard Golden Fish complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing toilet paper holder : C.P. brass, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT soap Dish Holder having length of 138mm (one hundred thirty eight millimeter) , breadth 102mm (one hundred two millimeter), height of 75mm (seventy five millimeter) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six grames), of Jal, Jaquar Parryware, Hindware Make complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm (eighty eight millimeter), weighing not less than 190 gms (one hundred nintey grames), complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeter) dia C.P.( chrome plated) brass bib cock of approved quality : complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimeter) dia C.P. (chrome plated) long nose brass bib cock of approved quality conforming to IS (Indian standard) standards and weighting not less than 810gms.(eight hundred ten grams) complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeter) dia. C.P. (chrome plated) brass stop cock (concealed) of standard design and of approved quality, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC ( Polyviny chloride) connection pipe with brass unions : 30 cm (thirty centimeter) length, 15 mm (fifteen millimeter) nominal bore, Cera/Jaquar/Finolex/hindware make complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 (Indian Standard : Eight thousand nine hundred thirty one), 15mm (fifteen millimeter) nominal bore complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing soil, waste and vent pipes, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

100 mm (hundred millimeter) diameter, PVC pipe as per IS: 1729

75 mm (seventy five millimeter) diameter, PVC pipe as per IS: 1729

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm (fifteen millimeter)nominal bore, 107 mm (one hundred seven millimeter)long foam flow, weighing not less than 110 gms(one hundred ten grams), complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for stop cock, with C.I. surface box 100x100x75mm (hundred into hundred into seventy five milimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20mm (twenty milimeter) nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (one cement :five fine sand : ten graded stone aggregate 40 mm (forty milimeter) nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve milimeter) thick, finished With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing square-mouth S.W. gully trap class SP-1 (one) complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred milimeter) size (inside) the weight of cover to be not less than 4.50 kg (four point fifty kilograme) and frame to be not less than 2.70 kg (two point seventy kilograme) as per standard design: providing and fixing square -mouth S.W. gully trap class SP-1(one) complete with 100x100 mm (hundred into hundred milimeter) size P type, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701(Indian standard: twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, Sintex make Tripple Layers complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty milimeter nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty milimeter) 1:3 (one cement :three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty milimeter nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm (nintey into eighty centimeter) and 45 cm (forty five centimeter) deep including C.I. cover with frame (medium duty) 500 mm (five hundred milimeter) internal diameter, total weight of cover and frame to be not less than 116kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram)and weight of frame 58 kg fifty eight kilogram) : With Sewer bricks confirming to IS : 4885 complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying and jointing glazed stoneware pipes class SP-1 (one) with stiff mixture of cement mortar in the proportion of 1:1 (One cement : One fine sand) including testing of joints etc. complete : 150 mm (one hundred fifty milimeter) diameter, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty milimeter nominal size) all-round S.W. pipes 150 mm (one hundred fifty milimeter) diameter complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC (Polyviny chloride)Cowl, complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75mm (Seventy five milimeter) diameter.

110mm (One hundred ten milimeter) diameter.

Ramesh Kumar Sharma