Completion of 100 bedded KGBV Girls Hostel at Khansahib

Earth work in excavation by manual means in trenches of foundations, drains .pipes over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5mtr as directed by Engineer-in-Charge. All kinds of soil :

Providing and laying of stone soling duely hand packed,incl.levelling and ramming and carriages coplete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc.and removal of form for walls (any thickness) including attached pilasters, buttresses, plinth ,string courses beams etc.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing ornamental grill work for gate using flat,square bars, angle bars incl.bracing welding in single built up sections incl.primming and painting complete job.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (KD Wood)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.22.1 With ISI marked M.S. pressed butt hinges bright finished of required 30mm thick

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,

Providing High Rib Coloured G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) two or more coats.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats [email protected]/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing 4mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :

P/F of Fallowing inclding fitting and fixture complete.

P - Trap

Covel 75mm

Ball valve 32mm

Washbasin with padestal

Angle Valve

Bib cock

Basin mixer

Plain bend 75mm

Plain bend 100mm

PVC Connection 18"

Steel Sink 24"

PVC 2nd class pipes

Bathset complete

English WC with cistern

Indian type 24" with cistern

P/F of Almunium Hardware fittings inclding carriages complete.

Tower Bolt 100x10mm

Tower Bolt 300x10mm

Handle 125mm

10mm Mortise latch and lock

125mm MS window stays

Door Aldrop

PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.

Carriage of materails by MT, from source to site of work

Sand av. lead of 20.00 KM

Stone aggregate av lead of 20.00 KMs