Estimate for dismentling, repairing, renovation, oiling and Greasing of grooves and gates of cross regulators of Bhakhra Main Branch at Fatehpur, Kusla and Golewala Headworks

Project in-charge

Work Manager/Site Engineer

Engineering Graduate

Skilled employees

UnSkilled employees

Punjab Water Resources Department

SCHEDULE (C) (Summary of Experience of Agency/Contractor/L&C Society for similar nature of work)

Name of the Contractor / L&C Society

Name of the Work

Please fill information about the each relevant work completed during the last Five years for works Costing more than Rs._________________

Name of Employer

Punjab Water Resources Department

PRE-QUALIFACTION SCHEDULE (D) AFFIDAVIT

1. That I have submitted a bid for execution of work relating to"

in response to NIT issued by the

2. That all information given in the pre-qualification schedule forms and in the attachments are true and correct.

3. That the undersigned hereby authorize (s) and request (s) any bank/person/firm or corporation to furnish pertinent information required by the Deptt. deemed necessary regarding my (our) competence and general reputation

4. That the undersigned understands that if any further qualifying information shall be required I/We agree to furnish such information at the request of department/project/implementing agency.

Punjab Water Resources Department

SCHEDULE (E) ADDDITIONAL INFORMATION

Name of the Work

WATER RESOURCES DEPARTMENT, PUNJAB

MANSA DIVISION I.B. JAWAHARKE

Name of the work : Estimate for dismentling, repairing, renovation, oiling and Greasing of grooves & gates of cross regulators of Bhakhra Main Branch at Fatehpur, Kusla & Golewala Headworks

Name of Firm

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

Over hauling of Gate mechanism of all types including dismentling, greasing, oiling and re instalation of mechamism complete in all respects

b) more than 10 feet - up to 30 feet width gates

Dismentalling Of Brick Work ( As per CSR item NO. 8.5 (b))

Dismentalling Of Cement concrete plain

Removing, & fixing of roller pin in position complete in all respects and to entire satisfaction of Engineer-in- charge.(upto 75mm/above 75mm)

Dismantling of damage wire rope/de-linking gates and holst mechanism complete in all respects and to entire satisfaction of Engineer in charge.

Threading of pins, complete in all respects and to entire satisfaction Engineer In charge above 75 mm.

Supply & installation of new steel wire rope in position including linking gate & boist mehanism for smooth balance operation including olling and greasing complete in all respects as per specification 637 IS Code 2266 and to entire satisfaction of Engineer in charge( 25 mm dia wire rope) (iii) 20-30mm dia

Removing, damaged structural steel and stacking clear from working space by Gas cutting, complete in all respects and to entire satisfaction of Engineer in charge.

Removing damaged old rubber seal bulb or flat including clamp plate of all sizes & types

Providing & fixing in position of flat wedge seal including preparation of surface complete I all respects and to entire satisfaction of Engineer in charge (80*12 mm)

Providing and fixing in position pipe seal, complete in all respects and to entire satisfaction of Engineer in charge 75mm x 8mm th.

Providing & fixing of Galvanized nut & bolts of all size & length required.

supply of Stainless steel Plate ( I/C carriage of material & loading and unloading)

Removel of Rivets from plates/angles/I- girders/channels with blow torch including supply of LPG Cylinder And Oxygen Cylinder complete in all aspects.

Miscellaneous minor repair of items such as M>S Falate, ISA, ISMC, ISMB etc to make gates operational including Labour charges

Providing Grease Nipple

Supply of multipurpose synthetic Hctiv Grease

Supply of multi grade mobile oil

U- clamps of steel wire ropes.

supply of M.S. ISA,ISMC ,ISMB ,Plate etc. ( I/C carriage of material & loading and unloading)

supply of Anchor

Steel Rope Pully

Fillet welding with high strength steel rods, including complete in all respect and entire satisfaction of Engineer in incharge ( 8mm Wide)

cutting straightening

Machining & finishing of any part to desire shape & size ,complete in all respects and to entire satifaction of Engineer in charge.

Hiring of 35 tonn capacity crane for lifting purpose

Cement Conc M-25 mechanically mixed with stone ballast or shingle using concrete mixer volumetric type

Providing LED light of Standard Company With Minimum 2 year Warranty (v.) 100W

PVC Insulated & PVC sheathed aluminium conductor cable overall Size 10mm Twin Core

First class Brick Work in 1:5

10mm thick Cement plaster 1:4

Gate Wheel Assembly complete in all respects to entire satisfaction of engineer in charge (b) 180 dia

Scraping brushing to remove paint to base metal surface

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.