REPAIRS TO CUPBOARDS, KITCHEN CABINETS, JOINERY AND MISC B/R WORKS UNDER AGE B/R-I OF GE (AF) LOHEGAON AT AF STN PUNE.

Amount

Demolition of cement concrete (un-reinforced) of any description as in sunken slabs, existing roof treatment any type complete all as specified and directed.

M & L for rendering 10mm thick in CM 1:3 finished even and smooth using extra cement with liquid water proofing compound slab treatment as in sunken slab plaster complete all as specified and directed. Note : Water proofing compound measured and paid seperately.

Supply only integral liquid water proofing compound .

S&F 40mm bore HDPE pipe as in spout pipes in sunken floors complete all as specified and directed.

M & L for applying two coats of water proofing coating, water and cement ratio 1:4:7 or the ratio as instructed by manufacturer on sunken floor and wall complete all as specified and as directed.

M&L PCC 1:5:10 lean concrete type D2 40mm graded aggregate as in filling of sunken floors complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded aggregate 40mm thick as in sub base to receive floor finishes complete all as specified and directed.

Dismantling roof treatment of any description including cement mortar bedding(But not backing)cleaning the surface by blowing,washing and rubbish off the premises complete all as directed. (a) M&L for10 mm thick rendering on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 3complete all as specified and as directed (b) M&L for priming evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sq.m including cleaning the surface. (c) M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application complete all as apecified and directed (Primer should be measured and paid as per Item above). (d) M&L applaying two coat of Aluminium paint over APP Membrane complete all as apecified and directed.

Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M&L for 25mm thick PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in padding concrete and the like all as specified and directed.

Taking down cement plaster on brick work or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for two layer (15 mm thick ) Rendering of top layer 5 mm thick with WPC over a 10 mm thick base layer rendering in CM 1:4 on concrete masonary or surfaces other than fair face of brick work finished fair and even without using extra cement.Note WPC shall be measured and paid separetely in supply only item.

M & L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M& L for rendering 10 mm thick cement plaster in CM 1:3 on fair faces of brick work on concrete surfaces on ceiling including finished even and smooth all as specified and directed.

M & L for preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper on wall surfaces over a coat of alkali resistant primer ocomplete all as specified and directed.

M&L for preperation of new plastered wall surface of any description and applayng two coats of cement based paint over a coat of primer complete all as specified and as directed.

Preparation of ceiling surfaces and applying two coats of white wash on surface of on ceiling /soffits of slabs, chajjas all as specified and as directed.

M&L for preperation old treated plastered surface of walls Stone, RCC roof of any description and applayng one coat of weather proof exterior emulsion paint all as specified and as directed.

M & L preparing of old decorated surfaces of walls and applying one coat of distemper oil-emulsion complete as specified and directed.

M&L for complete removal of existing finishes from old plastered surface of wall , Stone, Concrete surfaces of any description all as specified and as directed.

M&L for preperation of completely removed surface of wall , Stone, Concrete surfaces of any description and applayng two coat of distemper oil-emulsion over a coat of primer all as specified and as directed.

M&L for 1mm thick wall care putty on walls old/new surfaces of any description all as specified and directed.

M & L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M & L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for applying two coats of smart care crack seal with open and widen the cracks in a 'V' shaped groove and provide a strong base for adhesive ofcrack seal to the surface wire brush and clean the area throughly with water to free it from dust and loose particles any algal /fungal growth must be cleaned using bio - wash such as leaching powder complete all as specified and directed.

M& L for applying two coats of Damp proof ( Acrylic water proof) of fiber reinforced elastomeric liquid on filling of crack seal applied portion on both sides of cracks each side 75mm wides complete all as specified and directed.

M&L for applying two coats of Damp proof ( Acrylic water proof) of fiber reinforced elastomeric liquid including filling of crack seal on walls complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in all as specified

M & L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) in PCC 1:3:6 type C1 using 20mmgarded aggregate and setting in mortar 1:4 complete, in walls complete all as specified and directed.

Dismantling of floor hearth or wall tiling, terrazo tiles of anmy thickness including cement mortar bedding (but not backing) removing tiles and rubbish off the premises complete all as specified and directed.

M&L Glazed Ceramic Coloured Tiles, 450x300/300x600x7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M & L for 25mm thick cement concrete type B-0, 1:2:4 (12.50 mm grade aggregate) as in levelling course in flooring finished even and fair under floor finishes complete all as specified and directed.

M&L for vetrified ceramic tiles 10mm thick full body (light shade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/Rectngler) area exceeding 0.11 sqm and but n exceeding 0.18 sqm , in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/Rectngler) area exceeding 0.11 sqm and but n exceeding 0.18 sqm , in dado/Skirting etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including cement screed or bedding layer of cement mortar 10 mm thick in 1:4complete all as specified and directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick of size 300mmX300mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15 mm thick in 1:4 complete all as specified and as directe.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc.complete all as specified and as directed.

S & F 35. mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides as per manufactures instructions complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size Aluminium handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 300 mm long Aluminium sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: including stainless steel butt hinges and necessary S S screws)

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm in repairs complete all as specified and directed.

S&F in repair harrison rails mild steel CP of 20mm external dia and 1.60 mm thick for curtain rod including brackets complete all as directed.

S&F aluminium powder coated three track sliding window with two shutters of 5mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining including frame work etc complete all as specified. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh including frame work etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of structural steel work complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- Fe A complete all as specified and directed.

Dismantling wooden boarding, any description, fixed in any position with screws complete all as specified and directed .

M/L for 18mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown in Drg and as directed by Engr-in-charge.

-Ditto- as above but 12mm thick.

-Ditto- as above but 6mm thick.

S&F in repair 18/19 mm pre- laminated particles board exterior Gde, pre-laminated one side with decorative choice lamination & other side balancing white laminateion fixed with screws to timber frame work complete all as specified and directed. (for Kitchen cabinets/cupboards / shelves and similar works)

M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area n. exc. 6 Sqcm complete all as specified and directed.

M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc. 6 Sqcm and not. exc 13 Sq cm complete all as specified and directed.

S/F butt hinges 75mm extruded brass with MS hinges pin, bright polished and fixed type D-11 complete all as specified and directed.

S/F brass cup board lock 75mm size 4 level with duplicate keys complete all as specified and directed.

S/F brass handles extruded fabricated type 100mm size complete all as specified and directed.

S &F in repair 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete in repairs complete all as specified and directed.

M&L for preparation of new surface of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed

S&F Bidspa Single piece-WC with electronic seat cover, hinges, fixing accessories, accessories set and cistern fittings with brackests 10 Ltr Capacity, size-360x730x740mm, S trap-300mm with brackets and all necessary fittings etc complete all as directed and specified.

S&F in repair wall hung wash hand basin with fixing accessories size, 610 mm x 465 mmx275mm with pedestal including all necessory accessories and fittings such as CI brackets, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, 32 mm dia all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, 32 mm dia all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

-do- as above but 110mm dia

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.

-do- as above but 110mm dia

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door complete all as specified and directed.

M&Lfor PVC (SWR) vent cowl of 110mm dia

S&F in repair PVC (SWR) Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F Grating doom 100mm dia of Stainless steel with holes/without holes for waste pipes all as specified and directed.

S&F PVC Waste pipe as in WHB/sink Size 32 to 75mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 25mm dia complete all as specified and directed.

M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and directed.

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

M&L for GI tubing 25mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

M&L for cutting chases, pinning in making good to face for concealed water tubing complete all as specified and directed.

Disconnecting existing water tank exc 500 ltr and nexc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt etc from tanks and from mouth of circulatring pipes and re-fixing in position all as directed competete. (Note : For cleaning purpose only)

All as per Item No above but exc 250 and n.exc 500ltr capacity complete all as directed( Note : For cleaning purpose only)

S&F vitreous chinaware EWC including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe, including PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified incl PVC seat cover fixed in repair

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified .

S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed

M&Lin repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed

S & F in repair 15mm bore CP wall mixer for mixing hot and cold water screwed gown for iron pipe and fixed complete all as specified and directed.

S & F in repair brass Chromium plated shower roses 125mm size with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in repair for 15 mm dia CP pillar cock, cast copper alloy complete all as specified and directed.

M&L in repair for 15 mm bore bib cock straight line model chromium plated cast copper alloy with wall flange complete all as specified and directed.

S & F in repair Angular stop cock with wall flange , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S &F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S &F Two way bib cock with wall flange 15mm dia all as specified and directed.

S & F wall mixter 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe connecting legs and wall flange (wihtout hand and over head shower) all as specified and directed.

S & F single lever Wash basin mixer with popup waste with 450mm long braided hoses all as specified and directed.

S & F Corner glass shelf with brackets all as specified and directed.

S & F round shape 180mm dia overhead shower single flow with air effect (ABS body & Face plate chromium plated ) all as specified and directed.

S & F 120mm dia hand shower round shape multi flow with cascade effect (ABS body & Face plate chromium plated ) with rubit cleaning system all as specified and directed.

S &F Soap dish holder all as specified and dirrected.

S &F sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and directed.

S.R.M.K Enterprises (BID ID -3501370)

WAIKHOM BASANTA SINGH (BID ID -3497787)

VIKAS ENTERPRISES (BID ID -3507799)

M/S SHREE HARE KRISHNA INFRA (BID ID -3501287)

SHREESAMARTH CONSTRUCTION (BID ID -3501396)