Construction of Potia gaon Bor Namghar Road (from Ch. 0.00 to 1150.00 m) under Jorhat, Dergaon and Titabor Territorial Road Division under SOPD-G for the year 2020-21, Titabor LAC. Pkg. No. SOPD(G)/JDTTRD/TIT/04

Amount

Cleaning and grubbing road land including uprooting wild vegetation, grass, brushes, shrubs, spallings and trees girth upto 30mm, removal of slumps of such trees cut earlier and disposal of unserviceable matreials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic not exceeding 150mm in thickness as per clause 201.1 i) By Manual Means (A) In area of non thorny jungle

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with lead upto 1000m as per Technical specification Clause 301.5 (a) From Private land

Construction of Subgrade and Earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.1 & 3002.2 with lead upto 1000m as per Technical specification clause 303.1 a) From Private land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotovator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Technical specification clause 401 For Grading II material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. (A) By manual means

Providing and laying interlocking concrete block pavement(M40) having thickness 80mm as per technical specification clause 1504(inclusive of Edge restraint and carriage)

Earth work in excavation for structures as per drawing and Technical specification clause 305.1 including setting out ……………… with excavated material 1. Ordinary soil (i) upto 3m depth

Plain cement concrete M10 (1:3:6 nominal mix) in leveling course below open foundation of Head walls as per drawing and technical specification clause 1109.

Brick masonry work in cement mortar in foundation of head walls complete excluding pointing and plastering as per drawing and technical specification clause 1109 (in prop.1:4)

Plastering with cement mortar (1:4) 15mm thick on brick work for substructure as per technical specification.

Providing and laying RCC pipe NP3 for culverts on first class bedding of granular materials in single row. B) 1000mm dia

Laying of 600mm dia NP3 Hume pipe culverts without face wall as per SOR 2017-18

Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

SHYAM SUNDER GATTANI

Jyoti Prakash Hazarika

M/S M.Bee Traders

Smti Sewali Bordoloi Phukan

Sri Subhasish Das

Sri Ranjit Saikia

MANASH PRATIM KHANIKAR

Mukibul Borbora

Jewel Borah

RUPANJAL BORBORUAH