Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹43.0 L+₹1.5 L (3.56%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L2 | Rejected-Finance Higher Bid value | |
| 3 | L3₹43.2 L+₹1.6 L (3.95%)Rejected-Finance | L3 | Rejected-Finance Higher Bid value | |
| 4 | L4₹43.5 L+₹2.0 L (4.80%)Rejected-Finance | L4 | Rejected-Finance Higher Bid value | |
| 5 | L5₹44.0 L+₹2.4 L (5.82%)Rejected-Finance | L5 | Rejected-Finance Higher Bid value |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
26 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN 737102
PROVN OF FRESH WATER SUMP AND CONNECTED ACCESSORIES AT BURDONG UNDER GE GANGTOK
2022_MES_541430_1
8085AE8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹83,000
Yes
5 Sept 2022
28 Jul 2022
29 Aug 2022
29 Jul 2022
26 Aug 2022
5 Aug 2022
60 days
Amount
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil for foundation of retaining wall complete all as specified and directed
Excavation over areas n exc. 1.5m deep in hard and dense soil for foundation of retaining wall complete all as specified and directed
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in hard/dense soil for foundation etc complete all as directed by the Engr-in-charge.
M&L for PCC 1:3:6 type C2 (40 mm gradede aggregate) as in foundation and mass concrete complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (40 mm gradede aggregate) as in wall complete all as specified and directed.
M&L for RCC M 30 design mix (20 mm graded aggregate) in retaining wall, basement walls, ballest wall and the like any thickness complete all as specified and directed.
M&L for PCC 1:2;4 type B1 (20mm gradede aggregate) as in coping, bed plates, parepet, plinth course including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.
M&L for RCC M25 design mix (20mm gradede aggregate) in as in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and as directed.
Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase, railing and similar work including attached pillasters, buttresses etc vertical or to better in rough finished surfaces complete all as specified and as directed.
S&F TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping of columns, hooking ends and biniding wire and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
All as per item No-10 above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to weep hole complete all as specified and as directed.
M&L hand packing (any thickness) with broken stone or boulders at back of retaining wall and raising (or lowering) to required level complete,all as specified.
Returing, filling in soil/back filling of retaining walls using approved earth obtained from excavation incl watering, well ramming, etc complete all as directed.
Removing excvated material to a distance not exceeding 50 m and deposting where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.
Surface dressing n exc 15cm deep and getting out in soft /loose soil etc complete all as specified and as directed.
Rough excavation not exceeding 1.5 m deep and getting out in Hard/Dense soil for foundation of retaining wall complete all as specified and directed
Excavation in trenches inot exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation etc complete al as specified and directed
M&L for RCC M 30 design mix (20mm graded aggregate) in foundation including raft, footings, foundation beams, bases for coulumns etc complete all as specified and directed.
M&L for RCC M 30 design mix (20mm graded aggregate) in slab etc complete all as specified and as directed.
Use and waste formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surface complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders bressummers, lintels cantilevers shelves including supports overhangs etc also splays between floors and beam etc
Use and waste formwork to soffits of suspended slabs as roof slabs, landing and similar work not exceeding 200mm thick complete all as directed and specified
Material & labour for rendering 15mm thick in CM (1:4) on other than fair faces of brick or concrete surfaces, finished even & fair with using extra cement complete all as directed.
Material and labour for hardcore of gauge n.exc. 63mm (using broken stone or boulders) deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as directed.
M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/path/hardstanding finished the concrete surfaces even and smooth without using extra cement etc complete all as specified and directed.
Supply and fix 200mm bore CI pipe with spigot and socket ends,centrifugally cast,class LA, in any length, laid in trenches complete all as specified and as directed.
Supply and fix 150mm dia Cast iron soil, waste and vent pipes (Sand cast) in any length with or without ears, with cement joints, fixed to wall complete all as specified and as directed.
S&F CI bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch Ý junction double branch, cross (all sockets or sockets and spigot,collars, caps and plugs completeb all as directed.
Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n.exc 50m and making good surfaces in soft/loose soil complete all as specified and as directed.
S&F MS Joist, channel, angle, or tee sections, fixed independently without connecting plates etc (cut to ordinary lengths i.e. Within 20mm of the length indicated) conforming to Fe 410 -W (Gde-E- 250) quality complete all as directed
S&F mild steel bands, straps, supports or stays for rainwater, ventiliating pipes incl bolts, hooks for large gates, pintle hinges, large hasp and staples, chains, handmade sliding bolts, clamps, hold fast, and wall tie, hook for hanging fans, plain angle cleats for securing purlins trusses or rafters, knee piece inserts, two way and three way straps, plate washers and all similar small articles conforming to FE-290 Gde and E-165 all as directed and specified by Engr-in-Charge.
S&F 10mm dia and over round bars hooping of columns, hooking ends as in line wire for securing fencing wire etc complete all as directed by Engr in charge
Supply and fix PVC coated chain link fencing of 50mm x 50mm mesh size and made out of 3.15mm dia (2.15mm dia GI wire and 1mm thick PVC coating) conforming to IS fixed to any type of standard rails, straining bolt etc complete all as specified and directed
S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed
M&L for 100mm thick PCC type D2 1:4:8 (using 40mm graded stone agg) as in plith hardstanding finished the concrete surfaces even and fair without using extra cement etc complete all as specified and directed
M&L Sand filling as in base for inter-locking paver block complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness confirming to M-35 Grade with grey cement and pigment complete all as specified and as directed
Soil investigation work including conduction of (1) standard penetration test, upto depth 6M or refusal (N>50) which come earlier. Collection of samples at different depth for field and lab test including (2) classification of soil properties, (3) Direct shear test, (4) Tri-axial sher test, (5) Consolidation test, (6) field density, (7) Liquid limit, (8) plastic limit (9) specific gravity and others (10) Relative density and other lab test, as per soil condition, (11) settlement analysis to determination of bearing capacity of soil at foundation level and submission of three sets of investigation report with recommendation.
M/S S. S CHETTRI AND SONS
KAMLESH ENTERPRISE
KARMA SHERPA
M/S ANIL KUMAR THAKUR
DHARMINDER SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .