Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.1 LAccepted-AOC BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹52.2 L+₹3.0 L (6.15%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹53.6 L+₹4.4 L (8.99%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹54.9 L+₹5.7 L (11.6%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹55.9 L+₹6.7 L (13.6%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
16 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS, PIN-913859, C/O 99 APO
SPL REPAIRS TO BLDG NO CH- 34 IN 112 ENGR REGT REAR LOC ALONGWITH PROVN OF CERTAIN MINOR AND REVENUE WORKS AT TENGA AREA OF AGE B/R I AND AGE E/M UNDER GE 859 EWS
2022_MES_565335_1
8369
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹97,000
Yes
26 Apr 2023
25 Nov 2022
17 Dec 2022
25 Nov 2022
16 Dec 2022
9 Dec 2022
Amount
Dismantling plain or corrugated steel sheeting of any gauge, thickness including nainital or similar roof coverings complete all as specified and directed.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and Fix pre painted galvaliume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified and as directed.
fixing only galvanized, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in walls etc with grade of zinc coating 275.
S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
M&L for applying two coats of anti corrosive roof paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.
Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane complete all as specified and directed. Make :- Saint Gobin/Modi float/Triveni float glass/hindustan pilkington or equivalent ISI Marked
Demolition of cement concrete (un-reinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in subbase for floorings complete all as specified and directed.
M & L for 15mm thick screed bed in CM 1:4 for laying floor tiles.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade . (Make; Kajaria/ Orient Bell/ Johnson/ Somany). Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile n exc 0.36 sqm in floors/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces finished rough to receive tiles complete all as specified and directed.
M&L Glazed coloured ceramic tiles (300x 200) x 6 to 7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
S&F 50 mm thick 2nd class hard boarding clean sawn planed one side fixed with nails in any situation and butt joint, as purlins and rafters etc complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
S&F 6 mm thick plywood grade BWR type BB fixed with nails to timber frame work etc on wall surfaces complete all as specified and directed.
Material and labour for preparation of new wood or wood based material over 10 cm in width or girth of any descriptions not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down Chowkhats or frames exc 1.5 Sq.m but n exc 4 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
Taking down Chowkhats or frames n.exc 1.5 Sq.m each (without taking off shutters from the frame) including all fittings complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shape etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gates and similar work con-forming to Fe.290.Gde-E-165.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 415-0 or Grade -E complete all as specified and directed.
S&F solid PVC Door Frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F 100mm size mild steel butt hinge, medium weight, cold rolled fixed with screw complete all as specified and directed.
S&F 75mm size mild steel butt hinge, medium weight, cold rolled fixed with screw complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 100 mm long of extruded section and fixed complete all as specified and directed.
S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F pre coated mild steel floor door stopper tongue anodised 140mm length including vulcanised rubber piece complete all as specified and directed.
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F Rotational mounded polythene water storage tank of 500 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.
S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.
S&F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.
S&F in repair 15 mm bore stop valves fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) pipes single socketed 75mm dia in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) bends any radius, with access door 75 mm dia.
S&F PVC (SWR) junction single, (single T) equal or unequal provide with access door 110 mm bore complete all as specified and directed.
S&F PVC (SWR) WC connector 110mm dia lip ring.
S&F PVC (SWR) bends any radius, with access door 110 mm dia.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement complete all as specified and directed.
Supply and fixing 15 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
Supply and fixing 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed.
S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern low level, white with inlet ball walve float chain and pull and bracket complete all as specified and directed.
Supply and fixing in repair vitreous China squatting pan, "Orissa" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete
S&F in repair CP towel rail, fixed with chromium plated brass screws.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass, 12 cm wide with CP bracket guard and railing 600mm long complete all as specified and directed.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
S & F mild steel post, struts, angle iron and flat iron in fencing including cutting tops to shape as swan neck drilling holes ,notching for wire etc.and flate iron fillets for securing wire mesh etc confirming to gde Fe 410-0 or Fe 310-0complete as specified.
M&L for Mild steel Tie bars 10 mm dia.with screwed ends,nut, washers and mild steel plates for chain link fencing all as specified and directed.
Supply only chain link fencing mild steel galvanised any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wirecomplete all as specified and directed.
S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including taking down old barbed wire complete all as specified and directed.
Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc 10 cm long and dia of neck 11 to 15 mm complete all as specified and directed.
M&L for preparation of new steel surface of any description not exc 10 cm width or girth not otherwise described and applying Two coats of synthetic enamel paint over a coat of red oxide.
M&L for preparation of new steel surface of any description exc 10 cm width or girth not otherwise described and applying Two coats of synthetic enamel paint over a coat of red oxide.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
All as per Srl Item No. 69 but depth exc 1.5m and not exc 3m complete all as specified and directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150 mm on after they are laid and tested complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round and 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 150 mm internal dia of pipes complete all as specified and directed.
M&L for SGSW drain pipes 150 mm dia Grade 'A' laid in trenches in CM 1:1 all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
M&L for construction of 1.20 m dia x 3.00 m deep sokage well , excavation in hard/ dense soil, foundation PCC 1:3:6 wells of honey combed precast PCC block wall masonary including intercepting chambers, RCC cover slab, filling with brick bats complete all as specified in drawing and as directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide for fair finished concrete surfaces.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises necessary form work etc complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
M&L for MS TMT bars 06 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.
M&L for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
M&L for PCC (1:2:4) type B-1 (using 20mm graded aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges, coping, in benching etc including necessary formwork complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat concrete surface complete all as specified and directed.
M & L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement.
M&L Preparing newly plastered surfaces of walls and applying three coats of white wash.
M&L Preparing newly plastered surfaces of walls and applying three coats of white wash.
Dismantling boarding any discription, fixed in any position with nails all as specified.
M&L for 20 mm thick screed bed in CM 1:6 for laying floor tiles.
M&L for machine cut kota stone flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).
M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L for form work to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces
Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc
M&L for 18 to 20 mm thick marble work (table rubbed and polished) in steps and cooking platform and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade
Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar
M&L for pre-cast cement concrete block masonry with solid block exc 10cm in width and setting in mortar 1:2:4 type B1 using 20 mm graded aggregate block solid building blocks in CM 1:6.
S&F stainless made of stainless steel 1.00 mm thick kitchen sink with plug washers, wastes;including bedding in cement mortor on dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 x 420 mm with bowl size 410 x 330 x 160mm, complete.
M & L chequered cement concrete tiles 200 x 200 x 25 mm thick, set, jointed and pointed in neat cement slurry in floor/ footpath.
S & F 40mm dia cupboard nobs fixed with nuts, screws and mild steel bright finished completed all as specified and directed.
S & F kitchen cabinet with modular sliding racks/drawers including necessary fittings, to be fixed complete all as specified and as directed.
M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.
M & L for 100 mm thick PCC 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in footpath.
M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane.
M&L Second class Hard Wood in Scantling clean sawn all as specified.
S&F 32 mm bore Low density poly ethylene pipes of pressure rating 6kgf/cm2 fixed complete to walls,ceiling or in floors etc.
S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred "Hot ot Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed.
M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6 type C-1, stone masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in ED-2007 and as directed.
Material and labour for Salt glased stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturbed surface/ portion of the wall etc. complete all as specified and directed.
M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.
All as per item No 119 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed
All as per item No 119 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the same board complete all as specified and directed
All as per item No 119 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 2.5 sqmm 1100 volts FRLS grade and earth continuity wire 2.5 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
Supply and fix switch socket combination 2 in 1 , 5 Amp, 240 volts complete all as specified and directed.
Supply and fix switch socket combination 5 in 1 , 15 Amp, 240 volts complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and directed.
S&F 1x10 watt LED lamp Cat No. LHLDEUEEML8RO10 of Make Havells or equivalent Model of Makes specified in PS here-in-after.
S&F LED light fitting 1 x 20 watt, 220 V AC decorative box type with driver, holder incl LED tube light connecting up with three core flexible copper conductor cables of suitable size from ceiling rose complete all as specified and directed.
S&F LED light fitting 1x9W/1x10W bulkhead luminaire including LED light driver holder connecting up with driver holder and connecting up with three core flexible copper connecting cable of suitable size from ceiling rose complete all as specified and directed by Engr in Charge. Make Crompton Greaves or equivalent model of Make Bajaj / Phillips/ Havells/ Eveready
S&F MCB SP, 6 to 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
S&F MCB SP&N , 32 Amps, 240 volts, 'C' series, complete all as specified and directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 25x3 mm dia GI strip by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 40 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion.
Supply and laying or fixing or passing through pole from junction box to street light connection, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section 4 core stranded conductor in service connections complete all as specified and directed
Supplying and fixing 1100 volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or circular multistranded 6 sqmm complete all as specified and directed
M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug,Cap, bolts, nuts and screws as specified type 410 SP-31 (9 metres long) including applying two coats of black bituminous paint internally & externally upto planting depth & applying two coats of aluminium paint over a coat of aluminium primer (externally from top of coping) including writing MES pole NO with synthetic enamel paint first grade complete all as specified and directed. Note :- Earth work, PCC foundation coping shall be measured & paid seperately.
M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug,Cap, bolts, nuts and screws as specified type 410 SP-55 (11 metres long) including applying two coats of black bituminous paint internally & externally upto planting depth & applying two coats of aluminium paint over a coat of aluminium primer (externally from top of coping) including writing MES pole NO with synthetic enamel paint first grade complete all as specified and directed. Note :- Earth work, PCC foundation coping shall be measured & paid seperately.
Supply and fixing security light brackets made out of galvanised steel light grade pipe of 40mm dia, 1.5 m long bend to an angle of 120 degree with 02 Nos clamp made out of 50mmx5mm flat iron and 06 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F LED street light fitting 90 W, aerodynamically designed with better thermal management, new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium IP-66, road luminaire with high power LEDs as light source and electronic driver. Cat No : ENDURAPERALPLUSSL90WLED757PASYTOPCASTHO of Make Havells or equivalent model of Makes specified in PS here-in-after complete all as specified and directed.
S&F street light junction box of suitable size for three phase cable connection outdoor type, wearther proof, factory made out of PVC sheet 1.8mm thick with front side hunged opening having locking arrangement with nuts and bolts and arrangement for incoming and outgoing cable/ wire complete with the followings: (a) Bus bar with 04 aluminium strips, 100 Amps capacity insulated with insulators, including colour coding strip, including PVC cable of suitable size from bus bar to MCB. (b) MCB SPN 6 to 32 Amps--01 No (c) Clamp made out of 40mm x 5mm FI duly welded or fitted with nut and bolts complete all as specified and directed.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp, 240 Volt complete all as specified and directed.
S&F sheet metal enclosure for DBs SPN 4 way double door ,with 200 amp rated bus bar Double door complete all as specified and directed. .
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding of sweep 300 mm including necessary elect connection all as specified and directed by Engr in charge. Make - Havells/Bajaj/Usha/Orient
Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 16 sqmm 2 core as per IS 7098 Pt-II laid in trenches / ducts / encased in GI pipe / fixed to pole complete all as directed and specified.
Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed.
M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning.
Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed.
S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated with stranded aluminium conductor of size 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire from pole to pole, one twin core cable flat or circular complete all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated with stranded aluminium conductor of size 16 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.
Supply and laying or fixing or passing through pole from junction box to street light connection, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sq. mm nominal cross section 2 core stranded conductor in service connections complete all as specified and directed.
M/S N D ENTERPRISE
M/S DKT CONSTRUCTION
D.P. Traders
M/S SM ANSARI
M/S SUNRISE CONSTRUCTION AND CO
M/S YOGENDRA CONSTRUCTION CO
M/S GS ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .