Providing and fitting of 10000 GPH x 300 meter head HC pump motor set alongwith allied works at pumping station Chenani.

Amount

Providing, installation testing and commissioning of 10000 GPH X 300 meters head HC Pump coupled with minimum 100 HP motor at pumping station Chenani by way of shifting of pump motor set with allied accessories upto road side near pumping station Chenani by mechanical transport including loading / unloading the same from vehicle with the help crane, manual labour and then dragging manually up to the pump room on channels/pipes using pick axes, crowbars, ropes, tripod stand etc. and stacking inside pump-room. Laying of foundation block by way of earthwork in bulk excavation up to the depth of about 2 meters so as to form a size of 6’x3’x3’.Dumping of excavated material outside the pump room at a distance of 100 meters approximately and subsequently laying of foundation block by way of Laying of bed concrete of 1:4:8 mix using 20 percent aggregate and thereafter laying of RCC of 1:1.5:3 mix including supply/fixing of form work / shuttering, aggregates, sand and cement, reinforcement steel 12mm complete with cutting, bending, placing in position and binding , angle iron for supporting/alignment of base-frame, welding, Providing, fabrication and placement of 6 no. foundation bolts of suitable diameter one meter long threaded at one end and with anchor at other end ,making proper alignment of base frame horizontally as well as longitudinally, deployment of vibrator, mixer, welding set, tools and tackles etc. and curing complete..Job further includes dragging of pump motor set from the stacking place and then placing them on the base frame by manual labour and other tools and tackles, Leveling of pump motor set on the base frame by using laminated sheet, strips and coupling thereof. Laying of 100mm dia MS suction and 80mm dia delivery pipe lines to the pump set by providing and cutting of 100mm / 80mm dia MS pipes as per site requirement in the convenient lengths with the help of oxygen acetylene gas. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction and delivery pipes in continuous weld including providing, fabrication and fitting of 100mm / 80mm dia MS bends, flanges, expanders, reducers, rubber gaskets, as per requirement, providing and fitting of 100mm dia CI sluice valve along with nuts, bolts, gaskets etc. on the suction pipe line and 80mm dia cast steel sluice valve and cast steel NRV (rating compatible with pump head) one no. each including nuts, bolts, gasket, flanges on the delivery pipe side of pump set, fabrication fitting of manifold and connecting with delivery and rising main. The weld should be free from blow holes and porosity to have leak proof water tight joint. Suctions / delivery pipelines should by properly painted with red oxide primer and subsequently good quality black paint. Job includes providing / fitting of 250 ampere MCCB, 50KA breaking strength of Havells / L&T or other equivalent make, on the board of the pump room and connecting with incoming and outgoing cables. Complete job includes cost of material and machinery, transportation charges, manual carriage charges, skilled and unskilled labour charges , hire charges of tools and tackles etc. (Complete job)

Vaibhav Engineers and Technocrates

GEETA ENGINEERING MECH WORKS