Special Repair to Bldg No P-19 and P-22 (HKC) at MCMM Jabalpur

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc as in cement mortar complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, laid over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M&L Vitrified ceramic tiles 8-9mm thick in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick cement screed in CM 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 18-20mm thick in riser of steps, skirting or dadao and pillar, laid over and including 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over and including 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick, laid over and including 20 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

S&F powder coated(Minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated(Minimum thickness of powder coating 50 micron) aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete. Notes :- (a) Size of aluminum sections are as under :- (i) Shutter vertical section - Jindal main – 2010 Section No 20606. (ii) Shutter top & bottom - Jindal main – 2010 Section No 20604 (iii) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605. (b) 4 mm thick tinted glass and wire cloth shall be measured and paid for separately.

S&F 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded crushed stone aggregate) for filling of hollow pressed steel frame complete all as specified and directed.

S & F 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed.

M&L for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.

S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed.

S & F Decorative laminate 0.9mm thick type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

S&F 150mm size extruded brass handle fabricated type polished complete all as specified.

S&F 200mm size Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified.

S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified.

S&F brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150 mm long brass body and tongue with hard drawn steel spring single legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with brass plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed.

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing specified & directed.

S&F 12mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed.

S&F 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed.

S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

S&F 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement mixed with water proofing liquid complete all as specified and directed. (Note : WPC shall be measured and paid for separately as "supply only")

Applying acrylic cementitious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid for separately as "supply only")

Material & labour for 5 mm thick cement plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete in complete all as specified and directed.

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed.

Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.

Demolition and breaking up 110/75 mm dia drain pipes (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed.

S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed.

S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed.

S&F 110mm bore PVC vent cowl complete all as specified and directed.

S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed.

S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

S&F in repair PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified.

S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified.

S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed.

S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted.

S&F in repairs 15mm bore fancy type long neck chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.

S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc for any size of opening complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs Seat cover ( colour - white ) for Vitreous China wash down water closet pan (pedestal pattern) all as specified and as directed.

S&F in repair CP health faucets including all neceesary fittings specifictions all as specified and directed.

S&F in repair CP Cloth peg set of six including fittings complete all as specified and directed.

S&F in repair CP two way bib cock specifictions all as specified and directed.

S & F, in repair, PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed.

S&F in repairs 15mm bore brass CP wash basin mixture for mixing hot and cold water complete all as specified fixed including all necessary fittings complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cm in thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

M&L for 75 mm thick Cement concrete(1:3:6), type C2 using (40mm graded stone aggregate) finished the surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of celling and applying two coat of white lime wash complete all as specified and directed.

M&L preparing new steel surface and applying two coat of synthetic enameled paint over a red oxide primer exc 10 cm width or girth complete all as specfied and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primercomplete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer over and including avg 2 mm thick wall care putty complete all as specified and directed.

M&L for prepraring newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and as directed.

Preparation of old surfaces of plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment of wall surfaces of brick or concrete suraces, pillars, cornices and similar and applying two coats distmper oil emulsion over a coat of primer over and including avg 2 mm thick wall care putty, at any height, including necessary scaffolding complete all as specified and directed.

Complete removal of existing treatment over wall surces of brick or concrete, pillar, cornices etc at any height including necessary scaffolding etc and applying two alkali & fungal resistance, dirt resistance exterior emulsion weather coat paint of required shade over and including priming coat of exterior primer complete all as specified and as directed.

M&L for preparing surfaces of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying, one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing surfaces of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F in repair 150mm extruded brass handle fabricated type polished complete all as specified and directed .

S&F in repair 200mm size barrel tower bolts,with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed .

S&F in repair 300mm brass sliding door bolts with sand or die cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolt and fixed complete all as specified and directed .

M&L for post-construction anti- termite treatment of soil under floor using emulsion @ one lts per hole, 300mm apart including drilling and flushing 12mm dia hole with CM 1:2 to match the floor complete all as specified and directed .

Complete removal of existing treatment of old wooden surface of any description and making the exisiting surface clean with sand paper and fill the gap,voids,cracks with necessary filler material, necessary repair and applying two coats of melamine polish with brush or spary gun over a coat of primer complete all as specified and directed .

M & L for 75mm thick PCC (1:4:8), type D2, using 40mm graded crushed stone aggregrate as in sub base complete all as specified and directed.

M&L 60mm thick gloosy finish machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of M-35 grade of concrete, laid over and including 50 mm thick cushion of river sand/M-sand complete all as specified and directed.

Demolition and breaking up drain pipes 150mm (salt glazed ware or reinforced concrete ) including PCC bedding & haunching set in cement mortar of any description complete all as specified and directed.

M&L for 150mm dia reinforced cement concrete pipe Class NP-2, laid and jointed complete with collars complete all as specified.

M&L PCC 1:3:6 type C2, 40mm graded crushed stone aggregate as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm bore complete all as specified and directed.

M&L PCC 1:4:8 type D2, using 40mm graded stone aggregrate as in foundation, filling, mass concrete complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:4 on concrete surface, finished even and fair without using extra cement all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Precast RCC (1:2:4) type B1 (using 20mm graded stone aggregrate), in cover slabs of manholes, open drains inclusive of form work, set in CM (1:4) complete all as specified. (Note : Reinforcement shall be measured and paid for separately).

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

M&L for point wiring using approved colour coding as per IS with multi-stranded copper conductor 1.5 Sq.mm (nominal area),two single core.PVC insulated and unsheathed FRLSH cable1100 volts gradeISI-694 marked drawn through in and including heavy duty,PVC concealed conduit of white / ivory colour including all accessories after chasing in wall/ceiling etc.heavy duty ISI marked, including PVC insulated multi-stranded copper conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting ,chases and making good the disturbed surface to match with existing finish complete all as specified and directed for the following:-

One light point controlled by one switch 5/6 Amp.

One light point controlled by two way switch 5/6 Amp.

One Ceiling fan / Exhaust Fan point controlled by one switch and one regulator.

One bell/ buzzer point controlled by one, complete all as specified and directed.

One 3 pin switch socket outlet point 5 Amps on independent board.

One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item 123.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and as directed.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fixing of modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

Supply and fixing of modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fixing of modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fixing of modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fixing of modular metal flush box 2 module complete all as specified and directed.

Supply and fixing of modular metal flush box 3 module complete all as specified and directed.

Supply and fixing of modular metal flush box 6 module complete all as specified and directed.

Supply and fixing of modular metal flush box 8 module complete all as specified and directed.

Supply and fixing of modular White cover with frame plate 2 module complete all as specified and directed.

Supply and fixing of modular White cover with frame plate 3 module complete all as specified and directed.

Supply and fixing of modular White cover with frame plate 6 module complete all as specified and directed.

Supply and fixing of modular White cover with frame plate 8 module complete all as specified and directed.

Supply and fixing of ceiling rose surface backlite 65x50 mm 3 terminals complete.

Supply and fixing of Modular fan regulator step down 120 Watt, 2 module complete all as specified and directed.

Supply and fixing of modular Bell push flush type SP 6 Amps complete all as specified and directed

Supply and fixing of call bell (Ding Dong) 240 V, 50 Hz complete all as specified and all as directed.

Supply and fixing of LED lights fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder, including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing of Decorative LED , wall mounting light fitting , brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base. with connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of Vertical Distribution Board MCCBs VTPN 4 way double door suitable for MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Note:- (i) MCCBs, MCBs, SP/SPN/TPN shall be measured and paid for separately (ii) MCCB, MCB & DB shall have the same make.

Supply and fixing of sheet metal enclosure distribution board SPN 12 way 240 volts with IP 43 protection and double door, Bus bar rating 100 Amps, suitable for mounting MCBs all as specified.

Supply and fixing of MCCBs, 4 pole, 415 volts, 125 Amps, 36 KA all as specified.

Supply and fixing of MCCBs, 4 pole, 415 volts, 100 Amps, 36 KA all as specified.

Supply and fixing of MCB, single pole, 240 volts, 6 to 32 Amps, 10 KA all as specified and directed.

Supply and fixing of MCB, single pole, 240 volts, 40 to 63 Amps, 10 KA all as specified and directed.

Supply and fixing of MCB, single pole & neutral, 240 volts, 32 to 63 Amps, 10 KA all as specified and directed .

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed the following. (a) 2x6 sq mm and 1x6 sq mm as earth wire . Note : (i) Two runs of copper conducter and one runs of earth copper conducter and one run of conduit shall be measured as one length.

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC concealed conduit and all accessories concealed in walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed the following. (a) 2x4 sq mm and 1x4 sq mm as earth wire. Note : (i) Two runs of copper conducter and one runs of earth copper conducter and one run of conduit shall be measured as one length.

Taking down Ceiling fan of any size/sweep,fixture to deposit Stor Yard complete all as specified and directed .

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louver shutter, voltage 230 V, 50 Hz RPM 1200, Copper winding of sweep 250 mm including fixing, making of holes in wall, floor etc all as specified.

Supply and fix storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good all as specified and directed by Make-Havells / Jaguar / Panasonic .

Taking down of Geyser of any size and type fixture to deposit Stor Yard complete all as specified and directed.

M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length fo drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Taking down the existing electric meter of any capacity and make after disconnecting electrically , carry out the cleaning and refixing, reconnecting including applying one coat of paint on existing MS box of electric meter, testing in all respect for smooth running completeall as directed.

Supply and fixing of double pole sheet metal enclosure with a two pin and earth plug and socket complete MCB of 20 Amp complete all as specified and directed.

Material and labour for LED Street light 35W LED IP66 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type roadway luminaire with high power LEDs as light source including electronic driver 60W LED 6000K complete all as specified and as directed. .

Material and labour for street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 25mmX3mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size including painting with two coat of aluminium paint over a coat of red oxide primer complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc complete all as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 50 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc complete all as directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. ( Note : Punned thickness shall be considered for payment purpose)

M & L for unreinforced precast concrete cable cover class LV, type 1,flat , size 250mm x 150mm x 40mm complete all as specified and as directed.

Material and labour for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 50 mm dia complete all as specifieds and directed.

Schedule of credit amount of Rs 1,86,225.00 to be deducted during AOC

DOBARIA BUILDCON (BID ID -3382087)

Tiki Water proofing Co (BID ID -3380700)