Signature Projects under UTTORON Scheme Development of Maa Chandika Devalaya and Chand Sadagar Merghar Chaygaon Dakhin Kamrup

Amount

GUEST HOUSE BUILDING

GROUND FLOOR

EARTHWORK

EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

(b) In hard/ dense soil

PLINTH FILLING:

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering,ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales taxe and other duties and taxes as may be necessary.

(c) With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg.of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A)In sub-structure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

BRICK WORKS

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

(c).Stone soling of thickness 150mm.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

FLOOR FINISH

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

MARBLE FLOORING AT VERANDAH, COMMON LOBBY, PASSAGE AND RECEPTION LOUNGE ETC.

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.

(i) Dungri slab

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

VITRIFIED

iii)Executive range-2 (Sizes 600 mm x600mm and above)

c). Tuscan Series- Gres Lepato

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

iii) Of size300mmx600mm and above

GRANITE CLADDING

Providing 18mm thick Granite slab on vertical face of pedestal laid over 10 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as directed with approved quality of shade.

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water Proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

FALSE CEILING

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard.

False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary).

12.5mm MRB

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

COLLAPSIBLE / ROLLING SHUTTERS

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement.

The lock rail is made of extruded hollow PVC section in the configuration of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm. The infill is made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm.The entire door shutter should be provided with S.S. screws at appropriate places for rust free quality. (Door fixtures and fittings to be measured and paid separately.)

Providing , fitting , and fixing Syntex PVC door frame made out of extruded PVC section in an over all size of 50mm x 60mm having multi chamber cross section with maximum wall thickness of 2mm, +0.3mm with special polymeric reinforcement having an over all size of 30mm x 25mm width,150mm length at hardware location. The corner joints shall be either mitre cut and welded or joined by means of concealed cleats with necessary screws fitting.

Providing, fitting and fixing 38mm Melamine faced pre-laminated cellular core Flush Door with 9mm/12mm thick high density exterior grade laminated particle board fixed to the internal wooden frame of Sal/Hollock wood with Polyurestene central core, fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels.(Door fixtures to be measured and paid separately.)

(b)With Nepal Board-Exterior Grade (One side Decorative)

(ii) 12mm thick

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

RAILING

Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge.(For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

WINDOW

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

(i) 2-Panel with Toughten glass

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

ANTI-TERMITE TREATMENT

PRE-CONSTRUCTION ANTI-TERMITE TREATMENT

Pre- construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300 mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5(five) litres per square meter of the surface area before starting construction work(supplying of neccessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution(tricel or equivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLINTH PROTECTION

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

R.C.C. PILING WORK.

MACHINE DRIVEN PILES

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1)

(A) SINGLE UNDER- REAMED PILE

UNIFORM PILE

(II) Concrete Grade M25

iii) Pile dia 400 mm

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning ,cutting and bending to proper shapes and length as per specifications and drawings . The rings should be welded with vertical reinforcements as per specified IS codes of practice.(Inclusive of lap length, hook,chair, bend, anchor...etc)

(A) TMT bar made of Primary producer (From Primary producer)

DISMANTLING/ DEMOLISHING WORK.

Demolishing RCC/PCC pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolishing by excavating the earth upto required depth and clearing the debris as directed.

MISCELLANEOUS

Extra for using admixture & plasticiser

(a) RCC grade M20

iv) Pile Dia 400 mm

PILES TESTS

ROUTINE TESTS

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Empty boring for specified diameter piles from ground level to cut-off level.

d) Pile Dia 400 mm

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement. (iv) 400 mm dia

GUEST HOUSE BUILDING

FIRST FLOOR

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

Extra for each subsequent floor or part thereof above 1st floor level

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING (FORMWORK)

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

BRICK WORKS

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

Extra for each subsequent floor or part thereof above 1st floor level

FLOORING &FLOOR FINISH

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

VITRIFIED

iii)Executive range-2 (Sizes 600 mm x600mm and above)

c). Tuscan Series- Gres Lepato

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

iii) Of size300mmx600mm and above

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

GRANITE CLADDING

Providing polished granite tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).

(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

b) On two coat plaster

FALSE CEILING

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard.

False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary).

12.5mm MRB

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

INTERNAL PAINT

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

SPECIAL WATHER PROOF COLOURING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(a).Surfaces over 100mm in width or girth.

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

Extra for each subsequent floor or part thereof above 1st floor level

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing 38mm Melamine faced pre-laminated cellular core Flush Door with 9mm/12mm thick high density exterior grade laminated particle board fixed to the internal wooden frame of Sal/Hollock wood with Polyurestene central core, fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels.(Door fixtures to be measured and paid separately.)

(b)With Nepal Board-Exterior Grade (One side Decorative)

(ii) 12mm thick

Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

RAILING

Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge.(For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

GUEST HOUSE BUILDING

SECOND FLOOR

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

Extra for each subsequent floor or part thereof above 1st floor level

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING (FORMWORK)

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

BRICK WORKS

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

Extra for each subsequent floor or part thereof above 1st floor level

FLOORING &FLOOR FINISH

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

VITRIFIED

iii)Executive range-2 (Sizes 600 mm x600mm and above)

c). Tuscan Series- Gres Lepato

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

iii) Of size300mmx600mm and above

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

GRANITE CLADDING

Providing polished granite tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).

(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

b) On two coat plaster

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

INTERNAL PAINT

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

SPECIAL WATHER PROOF COLOURING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(a).Surfaces over 100mm in width or girth.

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing 38mm Melamine faced pre-laminated cellular core Flush Door with 9mm/12mm thick high density exterior grade laminated particle board fixed to the internal wooden frame of Sal/Hollock wood with Polyurestene central core, fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels.(Door fixtures to be measured and paid separately.)

(b)With Nepal Board-Exterior Grade (One side Decorative)

(ii) 12mm thick

Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughend glass

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

RAILING

Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge.(For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

BARGE BOARD

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

ROOFING SHEET

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.)

TATA Blue scope/ Dyna roof / Wonder Roof or equivalent as directed by the Departement

(v) 0.60 mm thick

Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Wonder Roof or equivalent as directed by the Departement

(v) 0.60 mm thick

ROOF TRUSS

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.

a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

FLY PROOF

Providing fly proof M.S. wire netting of I.S.gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mmx12 mm size chamfered including fitting, fixing with necessary wood screws etc.complete as directed (timber frame to be measured and paid separately).

ANGLES/FLATS/BOLTS AND NUTS

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed.

b) M. S. Flats…….

FALSE CEILING

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard.

False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary).

12.5mm MRB

GUEST HOUSE BUILDING

SANITARY FITTINGS AND WATER SUPPLY WORKS

EUROPEAN TYPE WATER CLOSET

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

C) Jaquar make

a) White

(vii) Wall mounted Closet Crystal (inclusive of seat cover and fittings) (Cat. No. 20047)

CONCEALED CISTERN

Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

A) Parryware make

(i) Rios with Chorme Push Plate (Cat no.8174/ Cat. No.C813726)

URINAL

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.

(C) Jaquar Make

(a) White

(iii) Large (Cat.No.URS-WHT-0703)

WASH BASIN

Providing vitreous china wash basin with CI/MS brackets ,C.P Brass chain with plug,PVC waste pipe including painting of fitting and brackets, cutting and making good the walls and slabs wherever required.( Pillar cock,stop cock, waste coupling are to be paid separately)

Table Top Basin

(C) Jaquar Make

(vi) JDBC (Cat. No.JDS-WHT-0547)

MIRROR

Providing fitting and fixing Decorative Mirror complete as directed and specified.

(A) Parryware Make

(a) Size 800mm x 600mm

SOAP TRAY, SOAP DISH, LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.

(iii) Cera Make (Cat.No.CA-103)

TOWEL RAIL,TOWEL RACK & TOWEL RING

Providing fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as directed and specified

(a) Jaquar make

(ii) Continental 600mm (Cat.No. ACN-1111N)

TOILET PAPER HOLDER

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.

(a) Jaquar make

(ii) Continental toilet paper holder with flap (Cat.No. ACN-1153N)

WASTE COUPLING

Providing fitting and fixing chrome waste coupling (half thread HT and full thread FT)complete as directed and specified.

(a) Jaquar Make

(iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801)

BOTTLE TRAP

Providing, fitting and fixing chrome plate bottle trap complete as directed and specified.

(a) Jaquar make

(ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

PVC PIPES BENDS JUNCTIONS TEES ETC.

Supplying fitting and fixing PVC pipes of 6kgf/cmsq (Supreme/Prince)or other ISI approved including joining fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia.

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv) 75mm dia.

.Supplying fitting and fixing 87.5 degree P.V.C bend of(Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC 45 degree bend of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC single Y of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC doubleY with door of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(i)110mm dia

(ii)75mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(ii) 75mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv)75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm x 110 mm

(iv) 110 mm x 75mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(iv) 110 mm x 75mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

COWEL

2Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.

iv) 75 mm dia PVC cowel of ISI make.

GRATING

Providing fitting & fixing CI Grating to the floors complete as directed and specified

(a)110mm dia

TOP TILE STRAINER

Providing fitting & fixing (150 x 150)mm PVC top tile strainer complete as directed and specified CP Grating to the floors complete as directed and specified

PIPING

Providing and fixing CPVC pipe having thermal stability for hot and cold water supply including all CPVC plain and brass threated i/c fixing the pipe with clamp qt 1.0m spacing. Including joining pipes

( A) Exposed on wall

SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)

d) 25 mm dia

e)20 mm dia

( B) Concealed by chieselling or breaking brick wall/CC wall/RCC wall and making good to the damaged structure.

e)20mm dia

i)Using Tata(medium)

f)15mm dia

i)Using Tata(medium)

BIB COCK

Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified.(G.I & C.P pipes will be measured separately)

Jaquare make

(iii)2-Way bib cock

STOP COCK

Supplying fitting and fixing brass stop-cock (heavy)of Sant make of approved size as mentioned below as directed and specified(G.I & C.P pipes will be measured and paid separately)

(i) Brass stop cock( heavy of sant make

a)15mm dia (angular)

HEALTH FAUCET

CERA MAKE :

CG 105A Health faucet brass body with wall hook and 1 metre SS braided rubber hase pipe .

FLUSH COCK.

Supplying fitting and fixing Chome plated(CP) Flush cock (heavy)of approved brand as directed and specified(G.I & C.P pipes will be measured and paid separately)

Jaquare brand

(a) continental / clarion

(i) Flush cock with flange 25mm with level plain knob

BASIN MIXER

Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed.

GROHE make Single - Lever Basin Mixer

a) Grohe BauFlow Single lever basin mixer with out popup Cat no-32851000

i) Central hole basin mixer Cat No.1100

SHOWER

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately)

Grohe make: Bau over head shower with arm 3 adjustable spreys with wall flenge Cat No- 27398000

(i) Shower arm light casted with wall flange

WALL MIXER

Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed.

iii) Wall mixer 3 in 1 system with provision for both telephonic shower and overhead shower complete with wall flange with 115mm long bend pipe Cat No.7281

VALVE

Supplying and fitting gun metal country pit valve(full way valve)I.S.I Make as specified and directed.

c) 25 mm dia

d) 20 mm dia.

e) 15 mm dia.

EXTERNAL WATER SUPPLY WORKS

WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

2000 Lt capacity

(a) Sintex make

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

iv) 32 mm diameter

iii) 25mm diameter

MARRIAGE HALL

GROUND FLOOR

EARTHWORK

EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

(b) In hard/ dense soil

PLINTH FILLING:

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering,ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales taxe and other duties and taxes as may be necessary.

(c) With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg.of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

Using mixture machine

(A)In sub-structure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

BRICK WORKS

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

(c).Stone soling of thickness 150mm.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

FLOOR FINISHED

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

MARBLE FLOORING AT VERANDAH, COMMON LOBBY, PASSAGE AND RECEPTION LOUNGE ETC.

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.

(i) Dungri slab

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

VITRIFIED

iii)Executive range-2 (Sizes 600 mm x600mm and above)

c). Tuscan Series- Gres Lepato

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

iii) Of size300mmx600mm and above

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

GRANITE FINISHED

Providing polished granite tiles of approved quality, size, shape and thickness not less than 18 mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water Proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

COLLAPSIBLE / ROLLING SHUTTERS

Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint.

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

(c) Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement.

The lock rail is made of extruded hollow PVC section in the configuration of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm. The infill is made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm.The entire door shutter should be provided with S.S. screws at appropriate places for rust free quality. (Door fixtures and fittings to be measured and paid separately.)

Providing , fitting , and fixing Syntex PVC door frame made out of extruded PVC section in an over all size of 50mm x 60mm having multi chamber cross section with maximum wall thickness of 2mm, +0.3mm with special polymeric reinforcement having an over all size of 30mm x 25mm width,150mm length at hardware location. The corner joints shall be either mitre cut and welded or joined by means of concealed cleats with necessary screws fitting.

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

RAILING

Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge.(For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

uPVC- Sliding Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

ANTI-TERMITE TREATMENT

PRE-CONSTRUCTION ANTI-TERMITE TREATMENT

Pre- construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300 mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5(five) litres per square meter of the surface area before starting construction work(supplying of neccessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution(tricel or equivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLINTH PROTECTION

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

R.C.C. PILING WORK.

MACHINE DRIVEN PILES

Providing cast in-situ machine driven reinforced cement concrete piles of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings including using of Bentonite solution. (Reinforcement to be measured and paid seperately as per item no. 21.4.1)

(A) SINGLE UNDER- REAMED PILE

UNIFORM PILE

(II) Concrete Grade M25

iii) Pile dia 400 mm

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning ,cutting and bending to proper shapes and length as per specifications and drawings . The rings should be welded with vertical reinforcements as per specified IS codes of practice.(Inclusive of lap length, hook,chair, bend, anchor...etc)

(A) TMT bar made of Primary producer (From Primary producer)

DISMANTLING/ DEMOLISHING WORK.

Demolishing RCC/PCC pile head of different diameters carefully without disturbing the remaining portion of the pile including opening out of the pile head to be demolishing by excavating the earth upto required depth and clearing the debris as directed.

MISCELLANEOUS

Extra for using admixture & plasticiser

(a) RCC grade M20

iv) Pile Dia 400 mm

PILES TESTS

ROUTINE TESTS

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Empty boring for specified diameter piles from ground level to cut-off level.

d) Pile Dia 400 mm

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement. (iv) 400 mm dia

MARRIAGE HALL

FIRST FLOOR

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

Extra for each subsequent floor or part thereof above 1st floor level

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING (FORMWORK)

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

BRICK WORKS

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

Extra for each subsequent floor or part thereof above 1st floor level

FLOORING &FLOOR FINISH

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

VITRIFIED

iii)Executive range-2 (Sizes 600 mm x600mm and above)

c). Tuscan Series- Gres Lepato

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

iii) Of size300mmx600mm and above

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

GRANITE CLADDING

Providing polished granite tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).

(i) With Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed.

b) On two coat plaster

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

INTERNAL PAINT

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

SPECIAL WATHER PROOF COLOURING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(a).Surfaces over 100mm in width or girth.

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

Extra for each subsequent floor or part thereof above 1st floor level

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing 38mm Melamine faced pre-laminated cellular core Flush Door with 9mm/12mm thick high density exterior grade laminated particle board fixed to the internal wooden frame of Sal/Hollock wood with Polyurestene central core, fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels.(Door fixtures to be measured and paid separately.)

(b)With Nepal Board-Exterior Grade (One side Decorative)

(ii) 12mm thick

uPVC- Sliding Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

RAILING

Providing and fixing Stainless Steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i.e. fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge.(For payment, only weight of stainless steel member is to be considered. No extra payment for fixing accessories such as nuts, bolts, fasteners etc. will be considered)

BARGE BOARD

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

ROOFING SHEET

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.)

TATA Blue scope/ Dyna roof / Wonder Roof or equivalent as directed by the Departement

(v) 0.60 mm thick

Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Wonder Roof or equivalent as directed by the Departement

(v) 0.60 mm thick

ROOF TRUSS

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.

a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

FLY PROOF

Providing fly proof M.S. wire netting of I.S.gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mmx12 mm size chamfered including fitting, fixing with necessary wood screws etc.complete as directed (timber frame to be measured and paid separately).

ANGLES/FLATS/BOLTS AND NUTS

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed.

b) M. S. Flats…….

FALSE CEILING

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard.

False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary).

12.5mm MRB

MARRIAGE HALL

SANITARY FITTINGS AND WATER SUPPLY WORKS

EUROPEAN TYPE WATER CLOSET

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

C) Jaquar make

a) White

(vii) Wall mounted Closet Crystal (inclusive of seat cover and fittings) (Cat. No. 20047)

CONCEALED CISTERN

Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

A) Parryware make

(i) Rios with Chorme Push Plate (Cat no.8174/ Cat. No.C813726)

URINAL

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.

(C) Jaquar Make

(a) White

(iii) Large (Cat.No.URS-WHT-0703)

WASH BASIN

Providing vitreous china wash basin with CI/MS brackets ,C.P Brass chain with plug,PVC waste pipe including painting of fitting and brackets, cutting and making good the walls and slabs wherever required.( Pillar cock,stop cock, waste coupling are to be paid separately)

Table Top Basin

(C) Jaquar Make

(vi) JDBC (Cat. No.JDS-WHT-0547)

MIRROR

Providing fitting and fixing Decorative Mirror complete as directed and specified.

(A) Parryware Make

(a) Size 800mm x 600mm

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.

(iii) Cera Make (Cat.No.CA-103)

TOWEL RAIL,TOWEL RACK & TOWEL RING

Providing fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as directed and specified

(a) Jaquar make

(ii) Continental 600mm (Cat.No. ACN-1111N)

TOILET PAPER HOLDER

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.

(a) Jaquar make

(ii) Continental toilet paper holder with flap (Cat.No. ACN-1153N)

WASTE COUPLING

Providing fitting and fixing chrome waste coupling (half thread HT and full thread FT)complete as directed and specified.

(a) Jaquar Make

(iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801)

BOTTLE TRAP

Providing, fitting and fixing chrome plate bottle trap complete as directed and specified.

(a) Jaquar make

(ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

PVC PIPES BENDS JUNCTIONS TEES ETC.

Supplying fitting and fixing PVC pipes of 6kgf/cmsq (Supreme/Prince)or other ISI approved including joining fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia.

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv) 75mm dia.

Supplying fitting and fixing 87.5 degree P.V.C bend of(Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC 45 degree bend of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC single Y of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC doubleY with door of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(i)110mm dia

(ii)75mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(ii) 75mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv)75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm x 110 mm

(iv) 110 mm x 75mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(iv) 110 mm x 75mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

COWEL

2Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.

iv) 75 mm dia PVC cowel of ISI make.

GRATING

Providing fitting & fixing CI Grating to the floors complete as directed and specified

(a)110mm dia

TOP TILE STRAINER

Providing fitting & fixing (150 x 150)mm PVC top tile strainer complete as directed and specified CP Grating to the floors complete as directed and specified

PIPING

Providing and fixing CPVC pipe having thermal stability for hot and cold water supply including all CPVC plain and brass threated i/c fixing the pipe with clamp qt 1.0m spacing. Including joining pipes

( A) Exposed on wall

SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)

d) 25 mm dia

e)20 mm dia

( B) Concealed by chieselling or breaking brick wall/CC wall/RCC wall and making good to the damaged structure.

e)20mm dia

i)Using Tata(medium)

f)15mm dia

i)Using Tata(medium)

BIB COCK

Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified.(G.I & C.P pipes will be measured separately)

Jaquare make

(iii)2-Way bib cock

STOP COCK

Supplying fitting and fixing brass stop-cock (heavy)of Sant make of approved size as mentioned below as directed and specified(G.I & C.P pipes will be measured and paid separately)

(i) Brass stop cock( heavy of sant make

a)15mm dia (angular)

HEALTH FAUCET

CERA MAKE :

CG 105A Health faucet brass body with wall hook and 1 metre SS braided rubber hase pipe .

FLUSH COCK.

Supplying fitting and fixing Chome plated(CP) Flush cock (heavy)of approved brand as directed and specified(G.I & C.P pipes will be measured and paid separately)

Jaquare brand

(a) continental / clarion

(i) Flush cock with flange 25mm with level plain knob

BASIN MIXER

Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed.

GROHE make Single - Lever Basin Mixer

a) Grohe BauFlow Single lever basin mixer with out popup Cat no-32851000

i) Central hole basin mixer Cat No.1100

VALVE

Supplying and fitting gun metal country pit valve(full way valve)I.S.I Make as specified and directed.

c) 25 mm dia

d) 20 mm dia.

e) 15 mm dia.

EXTERNAL WATER SUPPLY WORKS

WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

2000 Lt capacity

(a) Sintex make

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

iv) 32 mm diameter

iii) 25mm diameter

OUTDOOR TOILET BLOCK

GROUND FLOOR

EARTHWORK

EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

(b) In hard/ dense soil

PLINTH FILLING:

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering,ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales taxe and other duties and taxes as may be necessary.

© With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A)In sub-structure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

BRICK WORKS

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

(c).Stone soling of thickness 150mm.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

VITRIFIED

iii)Executive range-2 (Sizes 600 mm x600mm and above)

c). Tuscan Series- Gres Lepato

B) ON WALLS

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department).

iii) Of size300mmx600mm and above

PLASTERING

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water Proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

INTERIOR PAINTING

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

FALSE CEILING

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/ F suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 5mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm thick Gypboard.

False ceiling (Light Duty) with Moisture Resistant Board (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc., cut out made with frame of perimeter channel supported suitably to be measured and paid separately as and where necessary).

12.5mm MRB

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement.

The lock rail is made of extruded hollow PVC section in the configuration of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm. The infill is made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm.The entire door shutter should be provided with S.S. screws at appropriate places for rust free quality. (Door fixtures and fittings to be measured and paid separately.)

Providing , fitting , and fixing Syntex PVC door frame made out of extruded PVC section in an over all size of 50mm x 60mm having multi chamber cross section with maximum wall thickness of 2mm, +0.3mm with special polymeric reinforcement having an over all size of 30mm x 25mm width,150mm length at hardware location. The corner joints shall be either mitre cut and welded or joined by means of concealed cleats with necessary screws fitting.

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

uPVC Windows

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

WATER PROOFING

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF mixed with cement in the ratio 1:2 as final coat.

A) using Master Crete M-81 of Choksey Chemicals/Dr. Sealkit Sealcrete(Asian Chemicals)

ANTI-TERMITE TREATMENT

PRE-CONSTRUCTION ANTI-TERMITE TREATMENT

Pre- construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300 mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5(five) litres per square meter of the surface area before starting construction work(supplying of neccessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution(tricel or equivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLINTH PROTECTION

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

BARGE BOARD

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

ROOFING SHEET

Providing Pre Painted Galvalume Sheet Roofing (PPGL) at all levels including fitting and fixing self drilling, self tapping screws complete (Roof trusses, purlins etc. to be measured and paid separately.)

TATA Blue scope/ Dyna roof / Wonder Roof or equivalent as directed by the Departement

(v) 0.60 mm thick

Providing Pre Painted Galvalume Sheet (PPGL) accessories ( Ridges / Valley / Gutter / Flashing) at all levels including fitting and fixing self drilling, self tapping screws complete. TATA Blue scope/ Dyna roof / Wonder Roof or equivalent as directed by the Departement

(v) 0.60 mm thick

ROOF TRUSS

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.

a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

FLY PROOF

Providing fly proof M.S. wire netting of I.S.gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mmx12 mm size chamfered including fitting, fixing with necessary wood screws etc.complete as directed (timber frame to be measured and paid separately).

ANGLES/FLATS/BOLTS AND NUTS

Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed.

b) M. S. Flats…….

OUT DOOR TOILET BLOCK

SANITARY FITTINGS AND WATER SUPPLY WORKS

INDIAN TYPE WATER CLOSET

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)

Indian type W.C Orissa pattern of size 580 x 440 mm

iii) Jaquar make

a) White

EUROPEAN TYPE WATER CLOSET

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately)

C) Jaquar make

a) White

(vii) Wall mounted Closet Crystal (inclusive of seat cover and fittings) (Cat. No. 20047)

CONCEALED CISTERN

Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

A) Parryware make

(i) Rios with Chorme Push Plate (Cat no.8174/ Cat. No.C813726)

URINAL

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required.

(C) Jaquar Make

(a) White

(iii) Large (Cat.No.URS-WHT-0703)

WASH BASIN

Providing vitreous china wash basin with CI/MS brackets ,C.P Brass chain with plug,PVC waste pipe including painting of fitting and brackets, cutting and making good the walls and slabs wherever required.( Pillar cock,stop cock, waste coupling are to be paid separately)

Table Top Basin

(C) Jaquar Make

(vi) JDBC (Cat. No.JDS-WHT-0547)

MIRROR

Providing fitting and fixing Decorative Mirror complete as directed and specified.

(A) Parryware Make

(a) Size 800mm x 600mm

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.

(iii) Cera Make (Cat.No.CA-103)

TOWEL RAIL,TOWEL RACK & TOWEL RING

Providing fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as directed and specified

(a) Jaquar make

(ii) Continental 600mm (Cat.No. ACN-1111N)

TOILET PAPER HOLDER

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified.

(a) Jaquar make

(ii) Continental toilet paper holder with flap (Cat.No. ACN-1153N)

WASTE COUPLING

Providing fitting and fixing chrome waste coupling (half thread HT and full thread FT)complete as directed and specified.

(a) Jaquar Make

(iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801)

BOTTLE TRAP

Providing, fitting and fixing chrome plate bottle trap complete as directed and specified.

(a) Jaquar make

(ii) Bottle trap (with internal partition) 32mm size with 300mm long wall connection pipe (Cat.No. ALD-769B)

PVC PIPES BENDS JUNCTIONS TEES ETC.

Supplying fitting and fixing PVC pipes of 6kgf/cmsq (Supreme/Prince)or other ISI approved including joining fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia.

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv) 75mm dia.

Supplying fitting and fixing 87.5 degree P.V.C bend of(Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC 45 degree bend of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC plain single tee of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC single Y of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC doubleY with door of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(i)110mm dia

(ii)75mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(ii) 75mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv)75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm x 110 mm

(iv) 110 mm x 75mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(iv) 110 mm x 75mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

COWEL

2Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.

iv) 75 mm dia PVC cowel of ISI make.

GRATING

Providing fitting & fixing CI Grating to the floors complete as directed and specified

(a)110mm dia

TOP TILE STRAINER

Providing fitting & fixing (150 x 150)mm PVC top tile strainer complete as directed and specified CP Grating to the floors complete as directed and specified

PIPING

Providing and fixing CPVC pipe having thermal stability for hot and cold water supply including all CPVC plain and brass threated i/c fixing the pipe with clamp qt 1.0m spacing. Including joining pipes

( A) Exposed on wall

SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)

d) 25 mm dia

e)20 mm dia

( B) Concealed by chieselling or breaking brick wall/CC wall/RCC wall and making good to the damaged structure.

e)20mm dia

i)Using Tata(medium)

f)15mm dia

i)Using Tata(medium)

BIB COCK

Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified.(G.I & C.P pipes will be measured separately)

Jaquare make

(iii)2-Way bib cock

STOP COCK

Supplying fitting and fixing brass stop-cock (heavy)of Sant make of approved size as mentioned below as directed and specified(G.I & C.P pipes will be measured and paid separately)

(i) Brass stop cock( heavy of sant make

a)15mm dia (angular)

HEALTH FAUCET

CERA MAKE :

CG 105A Health faucet brass body with wall hook and 1 metre SS braided rubber hase pipe .

FLUSH COCK.

Supplying fitting and fixing Chome plated(CP) Flush cock (heavy)of approved brand as directed and specified(G.I & C.P pipes will be measured and paid separately)

Jaquare brand

(a) continental / clarion

(i) Flush cock with flange 25mm with level plain knob

BASIN MIXER

Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed.

GROHE make Single - Lever Basin Mixer

a) Grohe BauFlow Single lever basin mixer with out popup Cat no-32851000

i) Central hole basin mixer Cat No.1100

VALVE

Supplying and fitting gun metal country pit valve(full way valve)I.S.I Make as specified and directed.

c) 25 mm dia

d) 20 mm dia.

e) 15 mm dia.

EXTERNAL WATER SUPPLY WORKS

WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

2000 Lt capacity

(a) Sintex make

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

iv) 32 mm diameter

iii) 25mm diameter

(A) PROPOSED ENTRANCE GATE

EARTHWORK

EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

(b) In hard/ dense soil

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A)In sub-structure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

BRICK WORKS

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

FLOOR FINISHED

MARBLE FINISHED

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels.

(i) Dungri slab

PLASTERING

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

B) On fair side

b) In cement mortar 1:4

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

EXTEROR PAINTING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

IRON GATE

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

WATER PROOFING

Doing patch work in roof slab/ Raft slab wherever necessary by laying small portions of two component Polymer Modified Mortar Sika Top 122 as specified & directed by the Department complete after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately).

(B) FRONT BOUNDARY WALL FAÇADE DEVELOPMENT

BRICK WORKS

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

PLASTERING

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

B) On fair side

b) In cement mortar 1:4

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

EXTEROR PAINTING

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Dulux (ICI) paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product.

h)Spectrum Star Spray

OPEN AIR STAGE CUM SECURITY BOOTH

EARTHWORK

EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

(b) In hard/ dense soil

PLINTH FILLING:

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering,ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales taxe and other duties and taxes as may be necessary.

(c) With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately)

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg.of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A)In sub-structure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

BRICK WORKS

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

(II) In superstructure above plinth level up to 1st floor level.

(b) In proportion 1:4.(1 cement:4 sand)

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

FLOOR FINISHED

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

KOTA STONE SLAB / SAND STONE FLOORING

Kota stone slab of 18 mm thick in riser of steps, skirting, dado and pillars laid with 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.

(2) 600mm x 900mm and above

ANTISKID TILES

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed.

(A) CERAMIC

i)Normal range (Sizes 300 mm x 300mm and above)

(a)Orient made: Galaxy Brown, Galaxy creama, Galaxy Pink, Galaxy Green, Pulsar Beige, Pulsar Blue, Pulsar Dove, Pulsar Pink, Burj Brown, Burj Green, Burj Slate

B) ON WALLS

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls).

a) Normal range Somany/ Orient/Nitco/Asian Make

ii) Of size 200mmx300mm and above

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Water Proofing Plastering

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

Water Proofing treatment of toilet floor

Providing and applying over roof slab/ raft slab, two coats of waterproofing slurry like SikaTop Seal 107 of Sika India Ltd./Dr. Sealkit Flexbond AP 121 C (Asian Chemicals) ./ MASTERSEAL 550 @ 1.5kg per sq.m. per coat, by brush after proper surface preparation (surface preparation including thorough cleaning of surface to be measured and paid separately) as specified & directed by the Department complete.

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

INTERIOR PAINTING

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

WEATHER PROOFING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

Providing, fitting and fixing PVC Door shutters of 37mm (single panel seamless finish) of Syntex make, at all levels made of extruded sections in the configuration of 'A'.The overall dimension is 37mm x 90mm, with usual process variation having a wall thickness of 2mm with a variation of +0.03mm provided with all plastic reinforcement to avoid rusting. The shutter frame is mitred and joined at the corners by means of stainless steel screws.The corners of the shutter frame are being reinforced by polymeric reinforcement of the size 125mm x 250mm and the lock rail is reinforced by 45 x18 x255 size reinforcement.

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

The lock rail is made of extruded hollow PVC section in the configuration of 'H' having wall thickness of 2mm with a variation of +0.03mm and effective dimension of 37mm x 105mm. The infill is made of multi-chambered hollow PVC extruded panel having an effective dimension of 762mm x 20mm or less as per requirement with usual process variation having a wall thickness of 1mm +0.03mm.The entire door shutter should be provided with S.S. screws at appropriate places for rust free quality. (Door fixtures and fittings to be measured and paid separately.)

Providing , fitting , and fixing Syntex PVC door frame made out of extruded PVC section in an over all size of 50mm x 60mm having multi chamber cross section with maximum wall thickness of 2mm, +0.3mm with special polymeric reinforcement having an over all size of 30mm x 25mm width,150mm length at hardware location. The corner joints shall be either mitre cut and welded or joined by means of concealed cleats with necessary screws fitting.

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

uPVC Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

Supplying and installing uPVC- Casement Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including glazing bead, folding gasket, glazing gasket, friction stay, Espag handle, Espag, keeper, drain cap, run up block, fisher screws, packing pieces with all stainless steel screws complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets,bridging wedges and glass packers and with suitable water draining system. Fittings ROTO / GQ or Equivalent. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent complete as directed. (FENESTA/ENCRAFT/WINSTA KOMMERLING)

(d) Single leaf Top hung Window using uPVC section of minimum sizes 58mm x 57mm x 2.4mm thick wall for frame, 58mm x 68mm x 2.4mm thick wall for glass sash With 5mm clear float glass (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

with Toughten glass

WATER PROOFING

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF mixed with cement in the ratio 1:2 as final coat.

A) using Master Crete M-81 of Choksey Chemicals/Dr. Sealkit Sealcrete(Asian Chemicals)

ANTI-TERMITE TREATMENT

PRE-CONSTRUCTION ANTI-TERMITE TREATMENT

Pre- construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300 mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5(five) litres per square meter of the surface area before starting construction work(supplying of neccessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution(tricel or equivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLINTH PROTECTION

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

SECURITY CUM OPEN AIR STAGE

SANITARY FITTINGS AND WATER SUPPLY WORKS

INDIAN TYPE WATER CLOSET

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately)

Indian type W.C Orissa pattern of size 580 x 440 mm

iii) Jaquar make

a) White

PVC FLUSHING CISTERN

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately)

ii) Hindware make

a) White

(i) Sleek+ PVC cistern

WASH BASIN

Providing vitreous china wash basin with CI/MS brackets ,C.P Brass chain with plug,PVC waste pipe including painting of fitting and brackets, cutting and making good the walls and slabs wherever required.( Pillar cock,stop cock, waste coupling are to be paid separately)

Corner Basin

(A) Parryware Make

(i) Corner 400 x 400 (Cat. No.C0408/55)

MIRROR

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

SOAP TRAY,SOAP DISH,LIQUID SOAP DISPENSER AND LIQUID SOAP CONTAINER

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified.

(a) Parryware Make

(i) Recess SP & SG dish (Cat.No. C9935)

TOWEL RAIL,TOWEL RACK & TOWEL RING

Providing fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as directed and specified

(b) Sona make

(i) Towel rail Diplomat 300mm long (Cat.No.TR-0605)

WASTE COUPLING

Providing fitting and fixing chrome waste coupling (half thread HT and full thread FT)complete as directed and specified.

(a) Jaquar Make

(iii) Rupa 50mm (HT/ FT) (Cat.No.WS-0801)

BOTTLE TRAP

Providing, fitting and fixing chrome plate bottle trap complete as directed and specified.

(a) Jaquar make

(i) Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe (Cat.No. ALD-769)

PVC PIPES BENDS JUNCTIONS TEES ETC.

Supplying fitting and fixing PVC pipes of 6kgf/cmsq (Supreme/Prince)or other ISI approved including joining fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm dia.

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv) 75mm dia.

Supplying fitting and fixing 87.5 degree P.V.C bend of(Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(ii) 110mm dia.

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC 45 degree bend of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified

(a)In exposed surfaces or in trenches

(i) 160mm dia

(ii)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iii) 90mm dia.

Supplying fitting and fixing PVC doubleY with door of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(i)110mm dia

(ii)75mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i)110mm dia

(ii) 75mm dia

(b)Concealed by chiselling or breaking brick wall/C.C/R.C.C and making good to the damages.

(ii)110mm dia

(iv)75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified.

(a)In exposed surfaces or in trenches

(i) 160mm x 110 mm

(iv) 110 mm x 75mm

b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages.

(iv) 110 mm x 75mm

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

Supplying fitting and fixing PVC cleaning pipe of (Supreme/Prince) or other ISI approved including joining fitting and fixing etc.in exposed surface or trenches as necessary complete at all levels including below G.L as directed and specified.

COWEL

2Providing fitting and fixing PVC cowel of ISI make complete as directed and specified.

iv) 75 mm dia PVC cowel of ISI make.

GRATING

Providing fitting & fixing CI Grating to the floors complete as directed and specified

(a)110mm dia

TOP TILE STRAINER

Providing fitting & fixing (150 x 150)mm PVC top tile strainer complete as directed and specified CP Grating to the floors complete as directed and specified

PIPING

Providing and fixing CPVC pipe having thermal stability for hot and cold water supply including all CPVC plain and brass threated i/c fixing the pipe with clamp qt 1.0m spacing. Including joining pipes

( A) Exposed on wall

SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40)

d) 25 mm dia

e)20 mm dia

( B) Concealed by chieselling or breaking brick wall/CC wall/RCC wall and making good to the damaged structure.

e)20mm dia

i)Using Tata(medium)

f)15mm dia

i)Using Tata(medium)

BIB COCK

Supplying fitting and fixing C.P bib cock 15mm dia of approved brand directed and specified.(G.I & C.P pipes will be measured separately)

Jaquare make

(iii)2-Way bib cock

STOP COCK

Supplying fitting and fixing brass stop-cock (heavy)of Sant make of approved size as mentioned below as directed and specified(G.I & C.P pipes will be measured and paid separately)

(i) Brass stop cock( heavy of sant make

a)15mm dia (angular)

HEALTH FAUCET

CERA MAKE :

CG 105A Health faucet brass body with wall hook and 1 metre SS braided rubber hase pipe .

FLUSH COCK.

Supplying fitting and fixing Chome plated(CP) Flush cock (heavy)of approved brand as directed and specified(G.I & C.P pipes will be measured and paid separately)

Jaquare brand

(a) continental / clarion

(i) Flush cock with flange 25mm with level plain knob

VALVE

Supplying and fitting gun metal country pit valve(full way valve)I.S.I Make as specified and directed.

c) 25 mm dia

d) 20 mm dia.

e) 15 mm dia.

EXTERNAL WATER SUPPLY WORKS

WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

500 litre capacity

(a) Sintex make

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

iii) 25mm diameter

SEPTIC TANK

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed.

10 Users

ELECTRICAL PANEL ROOM

EARTHWORK

EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in the following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

(b) In hard/ dense soil

PLINTH FILLING:

Earth/sand filling in plinth in layers not more than 150 mm thick including necessary carriage, watering,ramming etc. complete as directed and specified including payment of land compensation forest royalty, sales taxe and other duties and taxes as may be necessary.

© With river sand or silt (predominantly non plastic)by truck carriage including loading and unloading.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where neccessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg.of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

Using mixture machine

(A)In sub-structure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100 mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M 20 grade concrete or Prorp.1:1.5:3

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase(exceptspiral staircase and landing) including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING /FORM WORKS

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings and the like.

BRICK WORKS

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

(c).Stone soling of thickness 150mm.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed.

(I) In Sub-structure upto plinth level including dewatering if necessary

(b) In proportion 1:4.

(II) In superstructure above plinth level up to 1st floor level.

100mm thick wall using Cellular Light Weight concrete block of Size 500x200x100mm conforming to IS-2185 Pt-3 or pt-4 in cement mortar of proportion 1: 5 including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding rod is to be provided at every 3 course interval and will be measured and paid separately)

FLOOR FINISHED

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

a) Normal range Somany/ Orient/Nitco /Varmora/Jhonson Make

ii) Of size 600mmx600mm and above

PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed.

A) On rough side

b) In cement mortar 1:4

B) On fair side

b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

WALL PUTTY

Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

WALL PAINTING

CEMENT PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

INTERIOR PAINTING

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth.

(a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

EXTEROR PAINTING

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

PAINTING ON WOOD AND WOOD WOOD BASED SURFACES

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting.

(a). With ready mixed paint , Wood primer (pink)

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping.

(i).Surfaces over 100mm in width or girth.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they included in the rate.)(upto 1st fl level).

a) From Primary Producer: TATA/SAIL/Jindal steel/Shyam steel/RINL

(i) TMT Corrosion resistant steel (CRS) reiforcement bar

GRILL WORKS

Providing,fitting and fixing M.S grill of required pattern for windows/clerestory windows/opening with M.S flats at required spacing in frame all round,square or round M.S bars with round headed bolts and nuts or screws.

I. Plain grill

© Fixed to Brickwork/P.C.C/R.C.C

CHOWKATH

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

(a) With sal wood

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.)

(a) 30mm thick

DOOR AND WINDOW FITTINGS

ALUMINIUM FITTINGS

Supplying,fitting,fixing anodised aluminium fittings of approved make,reasonably smooth,free from sharp edges and corners,flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc.complete.(anodised to bright natural matt &satin finished)

(a)Sliding door bolts

(ii)250mm x16mm

(b)Tower bolts

(iii)200mm x12mm

(c) Door handle

(iii)150mm

t) Door stopper with rubber stopper

uPVC Windows

Supplying and installing uPVC- Sliding Windows made out of Lead free, UV resistant green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass

(a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash and, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FENESTA/ ENCRAFT)

(i) 2-Panel with 5mm clear float glass

WATER PROOFING

(A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.: (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat. (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF @ 15% by weight of cement. (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals)/RHEOMIX 131 of BASF mixed with cement in the ratio 1:2 as final coat.

A) using Master Crete M-81 of Choksey Chemicals/Dr. Sealkit Sealcrete(Asian Chemicals)

ANTI-TERMITE TREATMENT

PRE-CONSTRUCTION ANTI-TERMITE TREATMENT

Pre- construction anti-termite treatment at the bottom of foundation pits and walls on either side up to a height of 300 mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5(five) litres per square meter of the surface area before starting construction work(supplying of neccessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution(tricel or equivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying the soil along the external perimeter of the building (after construction completed) to a distance close to the plinth wall as specified and as directed by the deptt. up to a depth of 300mm making rod holes along the line @ 150mm apart to a depth of 300mm and applying emulsion @ 4.5 litres per running meter ensure moistening of the soil with emulsion (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

PLINTH PROTECTION

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified.

ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

RETAINING WALL TYPE -I

ASSUMING LENGTH= 6.0M

EARTHWORKS :

EARTHWORK IN EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2 m below the existing the ground level.

b) in hard/dense soil

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(A)In sub-structure upto plinth

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

(P) Using admixture,Plasticiser etc. for air entraining, water reducing purposeds including addition of agent for changing normal setting time of conc. As required.

( b) Conc. Grade - M 20 ( Prorp.1:1.5:3 )

SHUTTERING/ FORMWORKS.

TIMBER SHUTTERING

Providing from work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work in.

Sides of tie beams, grade beams etc. at or below ground level.

(b) Using 25mm thick plank

MASONRY WORKS

Brick soling

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

STONE MASONARY WORK

Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding,providing face stone, through stone and centering including racking of joints, curing and supplying and all cariage of stone as directed including payment of forest royalty and sales tax and carriage.

(b) Coarse Rubble Masonry

PLASTERING WORK.

CEMENT PLASTERING WORK.

15mm thick Cement plaster in single coat on brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(A) on raugh side

(b) In cement mortar 1:4

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete ( No extra measurement for lap,hook, chair, anchor etc.will be entertained in the measurement as they are included in the rate )(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

RETAINING WALL TYPE -II

ASSUMING LENGTH= 6.0M

EARTHWORKS :

EARTHWORK IN EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2 m below the existing the ground level.

b) in hard/dense soil

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(A)In sub-structure upto plinth

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

(P) Using admixture,Plasticiser etc. for air entraining, water reducing purposeds including addition of agent for changing normal setting time of conc. As required.

( b) Conc. Grade - M 20 ( Prorp.1:1.5:3 )

SHUTTERING/ FORMWORKS.

TIMBER SHUTTERING

Providing from work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work in.

Sides of tie beams, grade beams etc. at or below ground level.

(b) Using 25mm thick plank

MASONRY WORKS

Brick soling

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a).Brick on flat soling.

STONE MASONARY WORK

Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding,providing face stone, through stone and centering including racking of joints, curing and supplying and all cariage of stone as directed including payment of forest royalty and sales tax and carriage.

(b) Coarse Rubble Masonry

PLASTERING WORK.

CEMENT PLASTERING WORK.

15mm thick Cement plaster in single coat on brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(A) on raugh side

(b) In cement mortar 1:4

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete ( No extra measurement for lap,hook, chair, anchor etc.will be entertained in the measurement as they are included in the rate )(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

RETAINING WALL TYPE III

ASSUMING LENGTH= 6.0M

EARTHWORKS :

EARTHWORK IN EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2 m below the existing the ground level.

b) in hard/dense soil

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

STONE MASONARY WORK

Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding,providing face stone, through stone and centering including racking of joints, curing and supplying and all cariage of stone as directed including payment of forest royalty and sales tax and carriage.

(b) Coarse Rubble Masonry

PLASTERING WORK.

CEMENT PLASTERING WORK.

15mm thick Cement plaster in single coat on brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(A) on raugh side

(b) In cement mortar 1:4

MS RAILING AT MIDDLE RETAINING WALL

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M20 grade concrete or Prop. 1:1.5:3

SHUTTERING FORMWORKS.

TIMBER SHUTTERING( FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(ii) Using 25mm thick plank

PLASTERING WORK.

CEMENT PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(b) In cement mortar 1:4

PAINTING

CEMENT PAINT & PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WEATHER COAT EXTERIOR PAINT.

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

MS RAILING

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.

a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

LAND DEVELOPMENT ( EARTH FILLING)

EARTH WORKS

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00m below the existing ground level.

(b) In hard/ dense soil

EARTHWORK IN FILLING :

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, Municipal gate fees, if any monopolyduty etc. (profile measurment to be taken and 12.5%deduction for shrinkage to be made from total quantity)etc. complete as directed and specified.

b) Other than guwahati city .

UNDER GROUND WATER TANK

CAPACITY : 15,000 LTR

EARTHWORK

EARTHWORK IN EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.

(A) Up to a depth of 2.00 m below the existing ground level.

b) in ordinary soil

BRICK WORK

Providing soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(c).Stone soling of thickness 150mm.( 3 times) total thickness 450mm

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1cement :3 sand :6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE WORKS

Providing and laying plain/reinforced cement concrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work ( form work and reinforcement will be measured and paid separately)

(I) Using mixture machine

(a)In substructure up to plinth level

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

c) M25 grade concrete

PLYBOARD SHUTTERING

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in:

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.

(a) Floors etc. upto 200mm in thickness.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

INSIDE PLASTER

WATERPROOFING, CONCRETE ADMIXTURE & CHEMICAL TREATMENT, REPAIR, REHABILITATION & RE-STRENTHENING OF STRUCTURES

15mm thick plastering of the surface the interior of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @200gms per bag of cement as specified and directed by the department complete.

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate)(upto 1st floor level).

(A)From Primary producer : TATA/ SAIL/Jindal/Shyam steel/Rinl

(i) TMT Corrosion resistant steel(CRS) reinforcement bar

MAN HOLE COVER( Sanitary & water supply) volume -ii

Providing fitting and fixing 450mm dia 90mm thick CI Man hole cover and frame of 38kg weight complete as directed and specified.

DRIVE WAY AND PARKING DEVELOPMENT

EARTH WORK

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.

(b) In hard/ dense soil

SIDE BUMP

Stone masonary work in retaining wall, wing wall, abutment, foundation, steps, plinth etc. in cement mortar in prop 1:6 with levelling course of 1:6:12 with both faces hammer dressed including bonding, providing face stone, through stone and centering including racking of joints, curing and supplying and all carriage of stone as directed including payment of forest royalty and sales tax and carriage.

(b) Coarse Rubble Masonry

FILLING

(d) With stone dust obtained by truck carriage including loading and unloading to the site of work.

(b) Coarse Rubble Masonry

PREPARATION OF TRACK

Granular sub-base

Construction of granular sub-base providing close graded material, spreading in uniform layers with motor grade on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive the desired density, complete as per Clause 401. (with an initial lead of 5Km) For Grading I Material

Water bound macadam

Providing, laying, spreading and compacting stoneaggregate of specified sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheels steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screemning/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density(with an initial lead of 5 km) (i) Hand broken metal from blasted boulder

Gr.II Metal

Gr.III Metal

PAVERS BLOCK

Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver block as per IS 15658-2006 of thickness 80mm and days compressive strength not less than 30 N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher/ running/ herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with appropriate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and technical specification clause 1504 of MORD.

WALK WAY

EARTH WORK

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.

(a) In ordinary soil

FILLING

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.

(c).Stone soling of thickness 150mm.

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete.

b) 50mm thick

PAVER'S TILE

Proividing polished Multiwyn/DEVI/ VITA tiles of approved quality, size shape of specified thickness on pavers over a base course including cutting where necessary finished with flush pointing with Fix-A-Tile(Choksey/Sika/Pedelite/Rouf) white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.

(B) DEVI Tiles (Pavers)

ii) Of size 300x300 mm of 30 thick

DRAIN ( 600 WIDTH X 700 DEPTH mm)

EARTHWORK IN EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.

(A)Up to a depth of 2 m below the existing the ground level.

(a) In ordinary soil

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1cement :3 sand :6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(A)In sub-structure upto plinth

Using mixture machine

(A) In substructure up to plinth level

Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

N) Without using admixture, plasticiser

a) M15 grade concrete or Prop. 1:2:4

BRICK WORK.

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(a)Brick on flat soling

PLASTERING WORK.

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor.

(b) 20 mm thick

15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

PRE-CAST SLAB

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed.

b) 75mm thick slab

Intermediate Silt Trap along Drain

EARTHWORK IN EXCAVATION :

Earth work in excavation for foundation trenches of walls, retaining walls, footings of columns, steps and septic tank etc including refilling ( return filling ) the quantity as necessary after completing of work, breaking colds in return filling, dressing, watering and ramming etc.and removal of surplus earth with all lead and lifts as directed and specified in following classifications of soils including bailing out water where necessary as directed and specified.

(A)Up to a depth of 2 m below the existing the ground level.

a)In ordinary soil.

BRICK WORK

Providing brick soiling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering complete.

(c) Stone soling of thickness 150mm

PLAIN CEMENT CONCRETE

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1cement :3 sand :6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(a)In substructure up to plinth level

(P) Using admixture,Plasticiser etc. for air entraining, water reducing purposeds including addition of agent for changing normal setting time of conc. As required.

Foundation, Fotting,columns with base,tie and plinth beam, grade beam, pilecap, base slab, retaining walls,walls,walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level.

SHUTTERING FORMWORKS.

Providing from work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4.0m and removal of the same for in-situ reinforced concrete and plain concrete work in.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like.

(a)Floors etc.upto 200mm in thickness.

PLASTERING WORK.

15mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(b) In cement mortar 1:4

Cement concrete works in topping 1:1:2 (1cement:1sand:2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @2.75kg . Of cement per sq.m of floor (base concrete to be measured and paid separately)to be laid in panels including curing complete as directed.

(a) 15mm thick

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st floor level).

(b)TMT Bar

(ii)SAI/BISCON/SHYAM THERMEX

MAN HOLE COVER

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified.

DEEP TUBE WELL & BORING

Labour for sinking tube well with 40mm (internal) dia G.I. Pipes up to having strata, having potable water including fitting and fixing strainer hand pump and other accessories as directed complete as in any soil.

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost).

Supplying fitting and fixing Hand pump for 40 mm dia tube well with all accessories complete as directed.

ii) Mayur

Supplying, fitting and fixing lift and force Maya hand pump of approved with all accessories complete as directed by the Department..

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.

x) Bore hole of 300mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department.

PVC PIPE

SUPREME /PRINCE / FUSION /SFMC Brand

viii) 200mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed.

B) PVC PIPE

SUPREME / PRINCE / FUSION /SFMC Brand

ix) 200mm diameter

Supplying fitting and fixing GI filter 2.00 metre long.

Supplying fitting and fixing check valve(non return valve)including thread to pipes

c)40mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained.

Flushing clearing washing and watering of the tube well

AS PER MARKET PRICES ANALYSIS

Supplying, Testing and Commissioning of 2 or 3BHP Submerssible pump of approaved brand and make as per specification including all accessories like panel board, starter etc. complete in all respect as directed by the architect.

BOUNDARY WALL

Assuming Length =9m

TYPE- A

DISMANTLING

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

SURFACE PREPARATION

(a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING FORMWORKS.

TIMBER SHUTTERING( FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

(ii) Using 25mm thick plank

BRICK WORK.

(I) In superstructure upto 1st floor level including dewatering if necessary.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed in super-structure above plinth level up to 1st floor level.

(A) 112 mm thick brick wall.

(b) In proportion 1:4 (1 cement:4 sand)

PLASTERING WORK.

CEMENT PLASTERING

15mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(A) on raugh side

(b) In cement mortar 1:4

PAINTING

CEMENT PAINT & PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WEATHER COAT EXTERIOR PAINT.

Finishing wall with water proofing weather coat anti-fungal premium acrylic smooth exterior finish of snowcem XT brand of Snowcem India Ltd. Of required shade on old/ new wall surfaces to give an even shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels( 2 coats.).

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

FANCING

Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following.

BOUNDARY WALL

( TYPE -B)

DISMANTLING

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

SURFACE PREPARATION

(a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING FORMWORKS.

TIMBER SHUTTERING( FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

(ii) Using 25mm thick plank

PLASTERING WORK.

CEMENT PLASTERING

15mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(A) on raugh side

(b) In cement mortar 1:4

PAINTING

CEMENT PAINT & PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WEATHER COAT EXTERIOR PAINT.

Finishing wall with water proofing weather coat anti-fungal premium acrylic smooth exterior finish of snowcem XT brand of Snowcem India Ltd. Of required shade on old/ new wall surfaces to give an even shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels( 2 coats.).

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

FANCING

Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following.

a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts..

b). Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed.

c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately).

BOUNDARY WALL

TYPE - C

DISMANTLING

Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels

SURFACE PREPARATION

(a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M20 Grade concrete or prop 1:1.5:3

SHUTTERING FORMWORKS.

TIMBER SHUTTERING( FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(ii) Using 25mm thick plank

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.

(a) For depth not exceeding 1.0M.

(ii) Using 25mm thick plank

PLASTERING WORK.

CEMENT PLASTERING

15mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(A) on raugh side

(b) In cement mortar 1:4

PAINTING

CEMENT PAINT & PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WEATHER COAT EXTERIOR PAINT.

Finishing wall with water proofing weather coat anti-fungal premium acrylic smooth exterior finish of snowcem XT brand of Snowcem India Ltd. Of required shade on old/ new wall surfaces to give an even shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels( 2 coats.).

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

ORNAMENTAL GRILL

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ opening with M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws.

Ornamental Grill

(c) Fixed to Brickwork/P.C.C/R.C.C.

LANDSCAPING

LAWN MAKING BY DIBBLING

(a) By Doob grass (Cynodon dactylon)

(b) By Carpet grass (Axonopus affinis)

LAWN MAKING BY TURFING

(a) By Bahpotia grass and Doob grass (Cynodon dactylon) :

(b) BY CARPET GRASS (Axonopus affinis) :

POT PLANTING

Supplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)

(A) With Aeirides

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(D) With Vanda (hybrid)

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

III) Using concrete pot of 60 cm dia.

Supplying and planting of house plants in required size of pot including filling the pot to the top surface with appropriate soil media of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)

(A) With Fancy leaf caladium/Coleus

(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(iii) Using concrete pot of 60 cm dia.

(B) With Indian rubber plant / Prayer plant

(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(iii) Using concrete pot of 60 cm dia.

(C) With Fragrant dracaena / Silver net leaf / Philodendron / Devil's back bone /Peperomea/Croton

(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(iii) Using concrete pot of 60 cm dia.

(D) With Peacock/spider/Umbrella

(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(iii) Using concrete pot of 60 cm dia.

(E) With Maiden hair fern/Aloe/Boston fern/Swiss cheese plant/Forget me not

(i) Using earthen pot of 30 cm dia.

(ii) Using earthen pot of 60 cm dia.

(iii) Using concrete pot of 60 cm dia.

(F) With Marry Christmas begonia / Polypodium / Aluminium plant

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(G) With English Ivy

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(H) With Iron Cross Begonia

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(I) With Anthurium

(J) With Selloum

(K) With Birdnest fern/Good luck plant

Supplying and planting of palms with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)

(A) With Bottle palm

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(B) With Erica palm (Butterfly palm)/ Kentia palm

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(C) With Chinese Palm

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(D) With Fan Palm /Finger palm

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

Supplying and planting of cactus in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, sand, cow-dung, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned)

(A) With Peanut Cactus / Rat tail Cactus

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(B) With Prickly pear

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

(C) With Parodia globular

(I) Using earthen pot of 30 cm dia.

(II) Using earthen pot of 60 cm dia.

(III) Using concrete pot of 60 cm dia.

BED PLANTING

Supplying and planting of Dahlia / Chrysanthemum / Gladiolus on the ground ( bed planting, bed size 45 cm x 45 cm x 45 cm) including the preparation of the soil, providing organic manure and fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed .

HEDGE PLANTING / EXTERNAL HEDGE

Supplying and planting of suitable plant materials for preparation protective / external hedge (50 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .

(A) ADOPTING SINGLE ROW PLANTING METHOD

(i) With Duranta

(ii) With Kamini

(iii) With Chinese Bamboo

(iv) With Thuja / Ixora

(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD

(i) With Duranta

(ii) With Kamini

(iii) With Chinese Bamboo

(iv) With Thuja / Ixora

EDGE PLANTING / INTERNAL HEDGE

Supplying and planting of suitable plant materials for edge making / Internal hedge(20 cm wide) including the preparation of the ground by mixing organic manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .

(A) ADOPTING SINGLE ROW PLANTING METHOD

(i) With Duranta

(ii) With Coleus

(iii) With Brindavan / Latifolius

(iv) With Acalypha wilkesiana

(v) With Acer palmatum

(B) ADOPTING CROSS WISE DOUBLE ROW PLANTING METHOD

(i) With Duranta

(ii) With Coleus

(iii) With Brindavan / Latifolius

(iv) With Acalypha wilkesiana

(v) With Acer palmatum

TREE PLANTING

Supplying and planting of ornamental trees (1'-0" height sapling) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .

SHADE TREE

(A) Neem / Mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / peepal / Silver oak / Simalu / Ajar

(B) Kanchan / Nahar / Arjunu

(C) Sonaru

(D) Bottle Brush / Nil Gulmohar / Debadaru / Weeping Willow

(E) Ravenala

(F) Paine

(G) Christmas tree / Kuki

Flowering Tree

(A) Gulmohar / Ashok

(B) Kanchan

SHRUB PLANTING

Supplying and planting of ornamental shrub ( below 1'-0" height ) including pit making ( 60 cm x 60 cm x 60 cm ), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed .

(A) Radhachura / Krishnachura / Rat ki rani / Ixora / Jetuka

(B) Allmanda / Khorika zai / May flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda

(C) Korobi / Azalea

(D) Thuja

(E) Poinsettia / Forget me not

AQUATIC PLANT

Supplying and planting of aquatic plants ( water Lily and Lotus )after preparation of under water soil including organic manuring, supplying the required quantity of water and maintenance for a period of one year from the date of completion complete as specified and directed.

Preparation of a carpet bedding by raising the backside of the bed to a height of 45 cm (average) after mixing organic manure, fertilizer including supplying and planting of grass and specimen plants (Brindavan) to engrave the desired letters, necessary maintenance for a period of 6 months from the date of planting complete as directed and specified by the department.

Construction of a pergola ( Width = 2.0 m, Height of the side posts = 1.8 m, Height at the apex = 2.8 m) with angle iron of size 50 mm x 50 mm x 5 mm (placing at 2000 mm apart ) embedding the iron posts in P.C.C. base ( not less than 600 mm) covering at the top and sides by chain link fencing, painting one coat of primer and two coats of paint including supplying and planting of flowering climbers as enclosed from both sides ( 3 nos. per metre in one side ) of the pergola to facilitate climbing by pit making (30 cm x 30 cm x 30 cm) filling the pit with the mixture of soil and organic manure and necessary maintenance by trimming etc complete as specified and directed by the department. (P.C.C. and soling to be measured and paid separately)

Supplying and placing of orchid house of size 3.00 m x 1.5 m x 2.00 m with tub stand, make of 15 mm dia. G.I. Pipe with M.S. rod, M.S. flat etc. including roof frame, painting two coats, covering the roof with 75 % heat absorbing black nets and three sides with wire net complete as directed and specified.

Edging with bricks laid dry lengthwise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m.

Half brick circular tree guard internal diametre 1.25 m and height 1.2 m above ground and 0.02 m below ground bottom two coarses laid dry and top three coarses in cement mortar 1:6 and the intermediate coarses being in dry honey comb masonry as per design complete.

RENOVATION WORKS OF HISTORICAL POND

CEMENT CONCRETE WORKS

PLAIN CEMENT CONCRETE WORKS

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, wall, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

(a) In prop 1 cement : 3 sand : 6 coarse aggregate by volume

REINFORCED CEMENT CONCRETE.

Providing and laying plain/reinforced cement concrete works Cement coarse sand & 20mm down grade stone aggregate including dewatering if necessary,and curing complete but excluding cost of from work and reinforcment for reinforced cement concrete work (form work and reinforcement will be measured and paid separately)

(B)In super structure from plinth level upto 1st floor level.

(ii)Columns, pillar, posts, struts, suspended floor, roof, landing, shelf, and support, balcony, lintel, sill band beam, girder, bressumer, cantilever, staircase including preparing the top surface and finishing of nosing.

P) Using admixture, plasticiser etc for air entraining, water reducing purposes including addition of agent for changing normal setting time of concrete as required.

b) M20 grade concrete or Prop. 1:1.5:3

SHUTTERING FORMWORKS.

TIMBER SHUTTERING( FORMWORK)

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in:

Sides of tie beams, grade beams etc. at or below ground level.

(b) Using 25mm thick plank

Columns, Pillars, Posts & Strut

(a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face

(ii) Using 25mm thick plank

PLASTERING WORK.

CEMENT PLASTERING

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed.

(b) In cement mortar 1:4

PAINTING

CEMENT PAINT & PRIMER

a) Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

WEATHER COAT EXTERIOR PAINT.

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

PAINTING ON STEEL AND OTHER METAL SURFACE

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.

a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

STEEL&IRON WORK.

REINFORCEMENT

Supplying,fitting and fixing in position reinforcement bars conforming to relevant I.S Code for R.C.C work/R.B walling including straightening cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20G annealed black wire and placing in position with proper blocks supports chairs spacers etc.complete(upto 1st fl level).

(a)From primary producer: TATA/SAIL/Jindal steel/shyam steel/RINL

(i) TMT Corrosion resistant steel( CRS)

MS RAILING

Providing, fitting, hoisting and fixing of roof trusses fabricated out of combination of any two or all of the following sections (i) Square section (ii) Rectangular Hollow section of specification RSH/SHS and (iii) M.S. circular hlollow section of Grade 210 including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.

a) Using TATA make RHS/SHS of Grade 310 conforming to relevant I.S. code 4923 : 1997

External water supply, Plumbing and over head PCVC Tank

External water supply pipe

Piping

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe)

iv) 32 mm diameter

v) 40 mm diameter

vi) 50mm diameter

viii) 75mm diameter

ix) 90mm diameter

x) 110mm diameter

OVER HEAD WATER TANK

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes

2000 Lt capacity

(a) Sintex make