REPAIR TO PLUMBING, SANITARY FITTINGS, WALL AND FLOOR TILING IN

Amount

First quality glazed ceramic coloured tiles of 450x350x7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:3) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note :- Design, pattern and colour of tiles will be as approved by GE. Quoted rates are inclusive of any no of Highlighters required for making pattern .

First quality glazed ceramic coloured tiles of 300x600x7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:3) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note :- Design, pattern and colour of tiles will be as approved by GE. Quoted rates are inclusive of any no of Highlighters required for making pattern .

First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white or coloured cement to match the shade of tiles in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note :- Design, pattern and color of tiles will be as approved by GE

Plain cement concrete (1:5:10), type E-2, using 40 mm graded mechanically crushed stone aggregates as in sub base/Sunken floor/paving ,foundations, filling and mass concrete, in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge.

Plain cement concrete ,25 mm thick (1:2:4) type B-0, using 12.5 mm graded mechanically crushed stone aggregatesd aggregate as in sub base in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge.

Vitrified ceramic tiles 10mm thick (square/ractangular) Coloured ( Light Shade ) polished tiles, area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in coloured cement to match the shade of tiles,in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note :- Design, pattern and color of tiles will be as approved by GE

Virified Ceramic tiles 10 mm thick (square/ rectangular) Coloured ( Light Shade ) polished tiles, area of each tiles not exceeding 0.36 sqm,for work on vertical surfaces such as skirtings, dados and risers to steps set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including Rendering 10mm thick Cement plaster 1:3 on fair faces of brick work or concrete surfaces,in and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note :- Design, pattern and color of tiles will be as approved by GE

Granite 16-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:6 in and including demolition of stone slab and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in cement mortar and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note :- Color and texture of granite stone will be as approved by GE

Reinforced Cement concrete type B-1, using 20mm graded mechanically crushed stone aggregates as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like in and including demolition of reinforced cement concrete of any description & in any position, and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge. Note: Steel reinforcement shall be measured and paid for separetely.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. on Flat Rough finished surfaces of concrete, complete all as specified and directed by Engineer-in-Charge

Mild steel TMT bars 10mm dia and over, cut to length , bent to shape required, including cranking , bending spirally for hooping of columns ,hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips ,complete all as specified and directed by Engineer-in- Charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even , including taking down old cement plaster on brick wall, racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra lime or cement) ,in and including taking down old cement plaster on brick wall, racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge.

Rendering 10mm thick Cement plaster 1:3 on ceiling surfaces rendering is to be finished even and smooth (without using extra cement) in and including taking down cement or cement lime plaster any description on brick or stone walls, etc. ,in and including taking down old cement plaster on brick wall, racking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge.

Pre–cast cement concrete block masonry with solid blocks of type C–1, 1:3:6 (20 mm graded crushed stone aggregate) exc. 10 cm in width and setting in mortar 1:4, in and including demolition of old precast concrete block walling, pillars etc. built in cement mortar and removing rubbish off the premises, complete all as specified and directed by the Engineer in Charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even , complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (without using extra lime or cement) etc, complete all as specified and directed by Engineer-in-Charge.

Rendering 10mm thick Cement plaster 1:3 on ceiling surfaces rendering is to be finished even and smooth (without using extra cement), complete all as specified and directed by the Engineer in Charge.

Preparation of new plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coats of dry distemper on ceiling, complete all as specified and directed by Engineer-in-Charge.

Preparation of new plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coats of dry distemper on wall, complete all as specified and directed by Engineer-in-Charge.

Preparation of new plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint on walls, complete all as specified and directed by Engineer-in-Charge.

Steel water tubing, 15 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, fixed in and including taking up or down steel water tubing and connections complete all as specified and directed by Engineer-in- Charge.

Steel water tubing, 20 mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, fixed in and including taking up or down steel water tubing and connections complete all as specified and directed by Engineer-in- Charge.

PP-R Polypropylene random copolymer) 3-layer concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including Taking up or down existing tubing and connections, including cleaning for re fixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

Bib taps,15 mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Bib taps,15 mm bore fancy type cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Pillar taps,15 mm bore cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Brass CP mixer 15 mm bore for mixing hot & cold water screwed down for iron pipe and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Stop valves, 15 mm bore cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Stop valves, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Stop valves, 15 mm bore fancy type chromium plated cast copper alloy,with long shank and cup (concealed type) screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Waste fittings, brass,32 /40 mm chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms) fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) suitable for urinals fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed as in repair, complete all as specified and directed by Engineer-in-Charge

Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) fixed as in repair, complete all as specified and directed by Engineer-in-Charge

PVC connections 15mm size with PTMT nuts of length 300mm fixed as in repair, complete all as specified and directed by Engineer-in-Charge

PVC connections 15mm size with PTMT nuts of length 450mm fixed as in repair, complete all as specified and directed by Engineer-in-Charge

PVC connections 15mm size with PTMT nuts of length 600mm fixed as in repair, complete all as specified and directed by Engineer-in-Charge

PVC (SWR) pipes 75mm bore single socketed in any length with ruber rings joints laid in trenches or in floors in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 100mm bore single socketed in any length with ruber rings joints laid in trenches or in floors in and ncluding taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 75 mm bore single socketed in any length with ruber rings joints fixed to walls with necessary brackets in and including taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) pipes 100 mm bore single socketed in any length with ruber rings joints fixed to walls with necessary brackets in and including taking down old pipe including fittings ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) bends any radius75mm bore fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) bends any radius 110mm bore fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

Brass chromium plated bottle traps 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed as in repair ,complete all as specified and directed by Engineer-in- Charge.

Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor fixed as in repair , complete all as specified and as directed by the Engineer-in-Charge. Note :- Qty and Rates are inclusive of for both P type and S type Traps as on actual required basis on ground

Vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest, with front or back inlet with integral foot rests including connections to trap, and to flushing pipe, antisyphonage pipe, etc (excluding flushing cistern and flush pipe) including Cast Iron 'P' or 'S' trap of 100mm size fixed in PCC 1:2:4 type B-2 and necessary lime concrete, fixed as in repairs, including making good the surface to match with existing floor finish ,complete all as specified and directed by the Engineer in Charge. Note :- Qty and Rates are inclusive of for both P type and S type Traps as on actual required basis on ground

PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern, fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Flush pipe of polyethylene of low or high density or PVC 32 mm dia for Pedestal pan fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Toilet paper holder premium quality Fancy type Chromium plated with flat recessed type stainless steel fixed as in repair , complete all as specified and directed by the Engineer in -Charge. Note :- Design as approved by GE

Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Straight PVC waste pipe for WHB and Urinals fixed with necessary fixing arrangments fixed as in repair , complete all as specified and directed by the Engineer in -Charge

Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position fixed as in repair , complete all as specified and directed by the Engineer in -Charge. Note :- Design as approved by GE

Vitreous china urinal partition white of size 310 x 700 mm, fixed in repairs and Urinal partitions slabs terminating about 40cm above floor line, complete all as specified and directed by Engineer-in-Charge

Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including 32 mm Waste coupling of PTMT (half or full threaded) fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement including 32 mm Waste coupling of PTMT (half or full threaded) fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Vitreous China Urinal, full stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including 32 mm Waste coupling of PTMT (half or full threaded) fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Vitreous China wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe with and including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed fixed as in repair , complete all as specified and directed by the Engineer in -Charge.

Vitreous China One Piece (Combo) wash down water closet pan (pedestal pattern) with and including Inbuilt back mounted Vitreous China Flushing cistern having dual mode flush System with two flush buttons and syphon system and Plastic seat cover with including connection to drain (or outgoing pipe) fixed to floor or with wall with necessary grouting of screws as per manufacturer instructions fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design and color as approved by GE

Vitreous China under Counter WHB with and including necessary cutting in Granite and connection to drain (or outgoing pipe) fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design and color as approved by GE

Towel Rack with 3 no hooks at bottom of premium quality fancy type Chromium plated fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Towel Rings Square or Rectangular premium quality fancy type Chromium plated fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed as in repair, complete all as specified and directed by the Engineer in Charge.

Soap Dish Square or Rectangular premium quality fancy type Chromium plated fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Glass Shelves with front SS rail Premium quality fancy type fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Diverted with and including exposed part kit 3-in-1 for Hot and Cold supply and connection to over head shower fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Spout for hot and cold fancy type premium quality fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Shower rose fancy type premium quality square of size exceeding 200x200mm with and including shower arm of length exceeding 300mm but not exceeding 450mm fixed as in repair, complete all as specified and directed by the Engineer in Charge. Note :- Design as approved by GE

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed surface in CM 1:4 & finished with similar specification as exists, complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description not exceeding 1 Sq. m each, from chowkhat, complete all as specified and directed by the Engineer in Charge.

Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with Particle Board Core, supplying and fixing in frame at site as per specification and drawings shown on page No.181 in section 8 of SSR part -II ,complete all as specified and directed by Engineer-in- Charge.

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 180 of SSR Pt-II ,complete all as specified and directed by the Engineer in Charge.

30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed by Engineer-in-Charge

Plain, solid, straight chowkhats & frames of 2nd class HW wrought, framed rebated on the solid, rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkhat & treated with coal tar ,complete all as specified and directed by Engineer-in- Charge.

Anodised aluminium frame for doors, windows,ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engineer-in- Charge.

Aluminium Anodised door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, 3 hinges, anodised aluminium snap beading screw etc for fixing of Glass or baord , complete all as specified and directed by Engineer-in-Charge Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Anodised aluminium window and ventilator shutters, fixed type without sash bar,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed by Engineer-in-Charge. Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1-No.), complete all as specified and directed by Engineer-in-Charge Note: Supplying and fixing of Glass or board shall be measured and paid seperately under respective items.

Pre-laminated particle board 9mm thick , interior grade, pre-laminated both side with decorative choice laminaton fixed with screws to timber frame work, as in doors or partitions, complete all as specified and directed by Engineer-in-Charge

Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed by Engineer-in- Charge.

Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane and sheet glass is ground or obscured or frosted, on one side, complete all as specified and directed by Engineer-in- Charge.

Butt hinges medium weight (ISI Marked) cold rolled mild steel and fixed of size of hinges100 mm ,complete all as specified and directed by the Engineer in Charge.

Butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size of hinges100 mm, complete all as specified and directed by Engineer-in-Charge

Aluminum alloy, anodized, sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250mm, bolts not less than 12mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed by Engineer-in-Charge.

Aluminum anodizes barrel tower bolts of extuded section and fixed of 100 mm long size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Aluminum anodizes barrel tower bolts of extuded section and fixed of 200 mm long size (length of bolt), complete all as specified and directed by Engineer-in-Charge

Extruded aluminium alloy handles of size 150 mm, fabricated type anodized ,complete all as specified and directed by Engineer-in- Charge.

Preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engineer-in-Charge

Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents

SHUBHAM ENGINEERS & BUILDERS

NEHA BUILDERS