CWE/P-79/2020-21 SPECIAL REPAIR TO BLDG NO P-25 (OTM) OF CERTAIN UNIT AT BASOLI GRN UNDER GE BASOLI

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced brickwork in suspended slabs, Beams, lintels, etc. in cement mortar or cement concrete (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified & directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified & directed.

M&L rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x250mmx7mm/450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete including 10mm thick rendering in cement mortar 1:4, and including dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete and finished even and fair and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes and including dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified and directed

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Brass chromium plated, fixed with rawl plugs complete all as specified and directed.

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection/sub base as in floor complete all as specified and directed..

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed

M&L Steel window factory made double shutter and tubular moulded frame of 16 gauge suitable for double shutter as per drg No CEPZ/TD/245/01 sheet 1/1 and CEPZ/TD/246/01 sheet 1/2 (double for mosquito proof one glazed with glazing bars and one gauged without glazing bars ) with side hung shutters including projecting type hinges non friction with 3mm thick 100mm long handle and two nos tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and painting with one shop coat of zinc chrome primer complete all as specified and directed.

M&L mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde E-165 including one coat of red oxide primer complete all as specified and directed .

M & L 1.25mm thick pressed steel frames with one coat of red oxide primer 165 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded crushed stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick Factory made 2nd class hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.

M&L for prelaminated PVC board 20mm thick ultra voilet printed prelaminated one side and other side balancing white lamination as in cup board shutters (weight not less than 12 kg/sqm), frame and shelve complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18mm mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified & directed

S&F extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified & directed

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as specified and directed.

S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for preparation of newly wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for two coats of distempering walls distemper dry, white or tinted on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

M&L two coats of cement base paint and including preparation of newly plastered surface complete all as specified and directed.

M&L for one coats of distempering walls distemper dry, white or tinted on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L two coats of cement base paint on old surfaces including prepartion of surface complete all as specified and directed.

M&L preparing old surfaces of ceiling (plastered or unplstered) and applying two coats of white wash complete all as specified and directed.

M&L Preparing new surfaces, plastered or unplastered of walll/facia/chajjas etc and applying two coats of weather proof exterior emulsion paint over a coat of primer on walls complete all as specified and directed.

Demolition brick tiles or terracing tiles, single layer including mud phuksha on roof complete all as specified and directed.

M&L 20mm thick screeding in cement mortor (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed

M&L providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr per Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)

M&L PCC 1:3:6, type C-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) complete all as specified and directed.

S&F in repair water closet (Squat pattern) vitreous china long pan orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern & flush pipe).including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor using cement concrete complete all as specified and directed.

S&F PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed in repair, complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 15mm complete all as specified and directed.d

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store bore of pipe 20mm complete all as specified and directed.

M & L Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

M & L Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 15mm complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) bore of pipe 20mm complete all as specified and directed.

S&F Stop valve/Angle valve, cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs, complete all as specified and directed.

S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore and fixed in repairs, complete all as specified and directed.

S&F in repair Stop valve, chromium plated, fancy type with long shank cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions of bore dia 15mm complete all as specified and directed.

S&F Bib taps , cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm and fixed in repairs, complete all as specified and directed.

S&F sheet glass self assembly with 5.5 mm thick and 12 cm wide sheet glass with chromium plated brackets guard and railing 60 cm long fixed to wall with PUC plug and screw complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed.

S&F in repair Chromium plated brass shower rose with or without swivel joints, 125 mm size including fixing to steel pipe or union, complete all as specified and directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 100mm dia, sand cast pipes complete all as specified and directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls/floors, 75mm dia, sand cast pipes complete all as specified and directed.

S&F cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 50 mm dia, sand cast pipes complete all as specified and directed.

Refixing only cast iron pipe (retrieved from Srl item No 61 to 63), any type complete all as specified and directed.

S&F 100 mm dia Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair Branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 dia, fitted with oval access door complete all as specified and directed.

S&F in repair Cast iron branch pieces, double (equal of unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore complete all as specified and directed.

S&F cast iron trap 'P' or 'S' 100 mm complete all as specified and directed.

S&F cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 (using 20 mm graded crushed stone aggregate) complete all as specified and directed.

Dismantling water tank any type of capacity exceeding 500 litres but not exceeding 1000 ltrs and removing to store complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with threaded closed top cover) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs including 20mm bore Ball valves high pressure of PTMT with eopxy coated aluminium rod and high density plastic ball screwed for iron pipes and fixed (minimum weight 210 gm) complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket, power socket and ceiling fittings) on surface wiring on wooden batten/casings * caping complete, including fixture and fitting such as switches, ceiling roses, pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc by unscrewing carefully from boards etc and making good disturbed surfaces of wall complete al as specified and directed

M & L Point wiring for light/fan/ bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkun boxes having thickness as specified 3mm bakalite laminated sheet ISI marked for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per item No 74 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 74 but for one 3 pin 5 Amp socket outlet on same board.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet ISI marked for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

S & F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed

S & F Socket outlet 2 in 1, 3 pin 5 Amps, flush type 240 Volts complete all as specified and directed

S & F switch socket combination 5 pin, 15 Amps, flush type, multipurpose, 240 Volts complete all as specified and directed

S&F ceiling rose surface bakelite 65x50mm, two to three terminal isolated body fixed on PVC round block complete all as specified.

S&F 4 way, VTPN 415V AC 50Hz, double door IP-43, isolated neutral bar cement spill protector double door with mechanical impact of strength IK-09 including MCCB 63 Amp, 4P Ics = 100% Icu complete all as specified and directed.

S&F sheet metal powder coated versatile double door IP-43 SPN distribution system fitted with two cover with copper bus bar rated 200 amps neutral link, earth bar and din rail suitable for use on 415 Volts, 50 Hz supply 8 way complete all as specified and directed.

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 04 way, IP-43 complete all as specified and directed.

S&F MCB SP 40 Amps, 415 Volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

S&F MCB SP 32 Amps, 415 Volts, 50 Hz, 6 to 10KA breaking capacity complete all as specified and directed.

S&F MCB SPN 32 Amps, 240 Volts, 50 Hz, 10KA breaking capacity complete all as specified and directed Make : Havells Cat Part No-DHMCCSN/L&T/Legrand

S&F MCB SPN 20 Amps, 240 Volts, 50 Hz, 10KA breaking capacity complete all as specified and directed Make : Havells Cat Part No-DHMCCSN/L&T/Legrand

S&F fans ceiling 1200 sweep having accessories such as copper wounded fan motor, wings, down rod, MS clamps with nut & bolts etc complete with electronic regulator socket type, operated in four steps and accessories 230V with BLDC motor rated ECO 30 Model complete all as specified and directed

S&F exhaust fans ceiling AC single phase 230/240 Volts of size 300mm sweep 1450 RPM metal body with accessories such as louver & shutter, copper wound motor, wings, complete with fixing arrangement in existing wall 4 Nos fasteners of size 10mm x 75mm long complete all as specified and directed

S&F lamp holder, PVC/Polycarbonate type with back plate having machine colour to holder suitable for angle/batten fittings including 5 Watt LED bulb complete all as specified and directed

S&F in replacement LED tube light fitting, 1x20w, 230V box type made of CRCA shee heavy duty industrial type housing with reflector cover channel, bipin holders, connector block etc. Complete with tube rod LED 20 watt, all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed Make : Crompton Greaves/Philips/Havells/Bajaj/Wipro & C&S.

S&F water heater storage type, electric capacity 25 litres. BEE 5 star rated comprising of SS water tank, heating element, thermostat, safety valves etc complete all as specified and directed

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) multistranded cable 1100 Volts grade with standed aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed

S&F for DWC high density polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS 14930 (Part I & II) for protection of undergroun cable laid along pole/along wall in PCC on GL/roof and including all fittings as required complete all as specified and directed

Excavation in trenches n. exc. 1.5 m width n.exc 1.5 m in depth for laying of cables & foundation of poles, stay assembly and getting cut in any type of soil complete all as specified and directed.

Returning, filling in including spreading levelling , watering and well ramming in layers not exc. 25cm in any type soil complete all as specified and directed

Removing of surplus excavated soil to a distance not exc. 50m and depositing where directed at a layers lnot exc 1.5 M above the starting point complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, all as shown in electric plate No. 03 of 2009 SSR Pt-I including filling of charcoal dust, common salt all around earth plate upto 150mm, 20 mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection point upto main board, funnel with wire mesh, pit in PCC 1:3:6 type C-1, (using 20 mm graded crushed stone aggregate), 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate reinforced with 8 mm dia TMT steel bars @ 100mm C/C both ways with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc inclusing testing on completion complete all as specified and directed. (Note : The rate quoted include cost of min 7.5 metre earthing wire.

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

Walia trading co