REPAIR/REPLACEMENT OF MODULAR KITCHEN, JOINERY WORK AND COMPREHENSIVE MAINTENANCE OF GARRISION BN AND BLDG OF AOR OF GE (W) COLABA, MUMBAI

Amount

Dismantling of brick work or stone/boulder masonry built in cement mortar or cement lime mortar, complete all as specified and directed.

M&L brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

All as per item No. 02 above but except bricks. Note:- Old brick received from item No. 01 shall be reused.

M&L Pre-cast cement concrete block masonry with solid blocks, with 390x190x190mm size, exc. 10 cm in width Type C1 (1:3:6) and setting in mortar 1:4, all as specified and directed

Taking down cement plaster of any description on brick or stone walls etc incl raking out joints hacking for key scrubbing down with water and removing debris outside MD land upto 04 storeys buildings, complete all as specified and directed.

Material and labour for 15-20 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon /mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding, complete all as specified and directed. Note: Liquid water proofing compound will be measured and paid seperately as supply only. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/ M/s Ultratech Cement Ltd

M & L for 10 mm - 12 mm Thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces(internal surface) and finished even & smooth witjhout using extra cement, complete all as specified and directed. Name of Manufacturer: M/s ACC acopalst/ CK Birla Aerocon/ M/s Ultratech Cement Ltd

Supply only liquid water proofing compound, complete all as specified and directed.

M & L for preparing old/new plastered surfaces of external walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Apex Ultima Protek of Asian Paint or equivalent make over a coat of primer including use of scaffoldings, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats Plastic emulsion paint over a coat of birla putty (avg 2 mm thick), complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats Oil based distemper over a coat of alkali resisting priming paint over 1 mm thick (average) Birla white putty, complete all as specified and directed.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall putty, complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for old loose spalled concrete should be chiseled from roof ceiling with the help of scrapers chisele & hammer after that cleaning of rust from mild steel rod applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface for 8-10mm Thick ready mix plaster in for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including three coat of white wash, complete all as specified and directed. Name of Manufacturer: M/s ACC acopalst / CK Birla Aerocon / M/s Ultratech Cement Ltd or other approved equivalent make.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats white washing including preparation, complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying two coats of oil based distemper over a coat of birla putty (avg 2 mm thick), complete all as specified and directed.

Material and labour in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood weather boarding , clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scaffoldings of any height, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in widht or girth and applying two coats of synthetic enamel paint over a coat red oxide, complete all as specified and directed.

Complete removal of old existing polish of doors/windows by using blow lamp or by grinder and applying French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats of best quality, complete all as specified and directed.

S&F decorative beading of 1st class hardwood of any size use for fixing of glass panes of doors and windows, complete all as specified and directed.

M&L anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor, complete all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and directed.

Material and labour for injecting chemical GLYPHOSATE 41 percent solution 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water) and removing the plants/vegetation with penetrated roots complete including all necessary scafolding arrangments upto any height, complete all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.

S&F in repair curtain rod (decorative type) 20 mm dia stainless steel as approved by GE, complete all as specified and directed.

S&F in repair curtain brackets decorative type (antique), for receiving single/double curtain rod, fixing for 20 mm rod, complete all as specified and directed.

S&F in repair PVC floor trap 100 mm bore outlet including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm (Run lead joint will not be measured & paid separately), complete all as specified and directed.

Demolition and breaking up drain pipes 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar upto any height including all scafloding arrangments, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto any height including all scafloding arrangments, complete all as specified and directed.

S&F for 110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples over wooden beading, complete all as specified and directed.

Supplied and fixed 110 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in repair aluminium hydraullic door closer, right hand and left hand opening doors double speed adjustable closing and latching speed, suitable for door shutter 851mm to 1000mm in width and 61 to 80kg in weight, complete all as specified and directed.

S&F in repair mild steel 300mm ordinary rat tail rod pattern spring including roller plate, complete all as specified and directed.

M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel painting, complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet/grid, complete all as specified and directed.

M&L for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.

Material and labour 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to aluminum frame work in ceiling and all other similar works, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge.

S&F Fibre glass reinforced translucent corrugated sheeting 10-12mm with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed.

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar of any hieght including scafolding, complete all as specified and directed.

Material and labour for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scaffoldings of any height, complete all as specified and directed.

Fixing only roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scaffoldings of any height, complete all as specified and directed. Note:- Old roof tiles received from item No. 41 shall be reused.

Dismantling roof battens of any description in any position, complete all as specified and directed.

Material and labour second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scaffoldings of any height, complete all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any height, complete all as specified and directed. Note:- Old roof battens received from item No. 44 shall be reused.

Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles,bedded and jointed in cement mortar 1:6, complete all as specified and directed.

S&F 3mm sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sq.m in each pane including hacking out old broken glass panes from wooden frames, complete all as specified and directed.

S&F in repair plain, galvanised mild steel sheeting in valley gutters of thickness 0.63mm, straight flashing (length and girth as fixed), complete all as specified and directed.

S&F in repair POP false ceiling consisting of frame work made with 50 mm Sq MS tube of 18 G thickness as main runner at 600 mm c/c both ways suspended/supported with MS flats 25x4 from existing RCC slab including providing and fixing expended metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium silicate semihydrate variety) to the expended metal of thickness not less than 10 mm finished smooth to line and level including necessary supports scaffolding etc as required and also including applying a coat of red oxide zinc chrome primer over the MS frame work and suspended, complete all as specified and directed.

Material and labour in repair Italian marble pre polished (of any type and colur) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding of front and sides of edges laid in floors/Jambs of window and all other similar works in approved design over 20 mm thick screed bed/plaster in cement mortar 1:4, complete all as specified and directed.

Supply and fixng in repair tile trim of Stainless steel 304 grade of thickness 1.50 - 2.0 mm of brass, 25mm width any colour as approved by GE, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for 25 mm thick 2nd class hardwood planed one side & edges tongued and grooved or rebated and fixed with nails as in wall panelling, complete all as specified and directed.

Material and Labour for clean sawn timber framed and fixed second class hard wood scantlings as in frame work to wall panelling, complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

S&F for joist, channel, angle or tee sections or MS Flats fixed independantly without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas including dismantling/ taking down old existing, complete all as specified and directed.

S&F for cast iron arrow, tee, bends and designs of various pattern as per requirement of site for gates, rails, braces, etc., complete, drilled for fixing of hooks and hinges or steel hanging door fittings also fastening, welding and fixing complete including dismantling/ taking down old existing , complete all as specified and directed.

Supply and fixing Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding columns/beam/ slab to hold cladding etc. and fixing Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site, complete all as specified and directed.

M & L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6), complete all as specified and directed.

M&L for granite (of any approved colour) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works, incl. moulding/rounding the edges of stone, laying over & including 15 mm thick cement mortar (1:6), complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmglossy finishetc, complete all as specified and directed. Make : Cera domino Cat part No B4511103 or equivelant of Bluestar/Nirali / Prayag.

S&F in repair Stainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and directed. Make : Cera domino Cat part No B4511103 or equivelant of Bluestar/Nirali / Prayag.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore, complete all as specified and directed.

S/F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed.

S/F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors, complete all as specified and directed.

S&F as in repair 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and directed.

M&L Non Skid coloured ceramic tiles, 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing shade of the tile, complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick, light shade area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing tile, complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes, complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick, light shade area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing tile vertical surfaces, complete all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 450/300/7 or 600x300x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match, complete all as specified and directed.

M&L Rendering 10mm thick cement mortal plaster 1:4 on fair faces of brick work or concrete surfaces, complete all as specified and directed.

M & L HI-Gloss digital ceramic tiles tiles in vertical surface tile of size 600mm x 1200mm 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. Note : The above item will be executed by applying tile adhesive of approved make and as per manufacture instruction.

S & F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE.

S & F of 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE.

S & F in repairs of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver, complete all as specified and directed by Engg-in-charge. Make : Asian sleek or other equivalent make as approved by GE.

S & F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape, complete all as specified and directed.

S & F in repairs of stainless steel modular thali-plate basket SS 304, size of 520x485x200mm, heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make : Asian sleek or other equivalent make as approved by GE.

S & F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make : Asian sleek or other equivalent make as approved by GE.

S & F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer channel, complete all as specified and directed. Make : Asian sleek or other equivalent make as approved by GE.

S & F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer channel having weighing capacity of 6 kg, complete all as specified and directed. Make : Cat Part No-6408 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S & F in repairs of stainless steel 304 grade, size 180x515x485mm pull out detergent rack having two shelves spaces with telescope drawer channel having weighing capacity of 6 kg, complete all as specified and directed.

S & F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make : Cat Part No-6175 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S & F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg, complete all as specified and directed. Make : Cat Part No-4340 of Godrej Kitchen appliances or other equivalent make as approved by GE.

Taking down Chowkhats or frames n exc 1.50 sqm each, complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed, complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009, complete all as specified and directed.

S&F in repair 125 mm Aluminium barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed.

S&F in repair 125 mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed.

S&F in repair 300 mm long Aluminium, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

S&F in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

S&F in repair 100 mm Aluminium Butt hinges, with mild steel hinge pin, bright polished and fixed, type B-11 fixed, complete all as specified and directed.

S&F in repair 100 mm brass Butt hinges, with mild steel hinge pin, bright polished and fixed, type B-11 fixed, complete all as specified and directed.

S&F in repair 125 mm long brass butt hinges, cast type, fixed, complete all as specified and directed.

S&F in repair 150 mm long brass handles, cast type, fixed, complete all as specified and directed.

S&F in repair 75 mm Mortice lock, vertical type, of Aluminium of 4 lever, complete all as specified and directed.

S&F in repair 75 mm Mortice lock, vertical type, of brass of 4 lever, complete all as specified and directed.

S&F in repair Aluminium drawer handles, projection drop (50mm to 65mm) on screwed plate, complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, complete all as specified and directed.

S&Fin repair 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F Brass knobs 35-40mm in diameter, complete all as specified and directed.

S&F in repair 140 mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

Material & Labour and fixed in repair for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. Note:- The item includes brackets, clamps and other similar small items.

S&F stainless steel Double Coat Hook of suitable colour, complete all as specified and directed. Make Jaquar Range :Kubix Prime Code :AKP-ABR-35761P / Equalent make.

M&L for 10 mm thick toughned glass as in any work including cutting to shape drilling holes reqd and with suitable bracket, complete all as specified and directed. Note:- The item includes the cost of itcheing

M & L for preparation of new painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (up to four storeys bldgs) including use of scaffolding where required for external painting of steel surfaces, complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (from five storeys to Eight storeys bldgs) including use of scaffoldings where required for external painting of steel surfaces, complete all as specified and directed.

M&L crack filler for exterior plastered surface upto 10 mm, complete all as specified and directed.

M&L for smart care crack seal compound for both interior and exterior surfaces, crack bridging ability for plaster cracks of upto 3 mm, complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

S&F in repair Brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand Basin, complete all as specified and directed.

S&F in repair wall mixturer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without hand an overhead shower), complete all as specified and directed.

S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule, complete all as specified and directed.

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws, complete all as specified and directed.

S&F in repair in brass chromium plated towel rack with 3 hooks 18" (Oval Range), complete all as specified and directed.

S&F in repair chromime plated, cast copper alloy jet spray with 1 mtr SS chrome plated hose and hook (for European seat), complete all as specified and directed.

M&L in repair single piece WC with PP thin rim seat cover white, fixing accessories, accessories set and cistern fitting size 665x355x770 mm and necessary fittings, complete all as specified and directed.

S&F for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromiplated brass screws and PVC rawl plugs, complete all as specified and directed.

S & F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame, complete all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side, complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F in repair LED kerb stone of size 500 mm x 150mm x 200 mm built in 1:4 cement mortar made out of five foundation rods ensuring complete protection against theft and having LED strip of length 470 mm with 22 Nox LED which is plastic coated and having adequate number of connectors and one power supply kit as per manufacturer requirement, complete all as specified and directed by Engineer-in-Charge.

S&F in repair solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications fixed, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15 mm size, minimum weight 142 grams, complete all as specified and directed by the Engineer-in-Charge.

S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm size, minimum weight 455 grams, complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 500 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 2000 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks of capacity 5000 liters (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs CI colour black round shape with dia 450 mm double seal with locking arrangement for specially desgine with heavy duty for over head tank fixing in any any height, complete all as specified and directed by the Engineer-in-Charge.

SRI SAIRAM COUNSTRUCTION (BID ID -3499387)

M S CONSTRUCTIONS (BID ID -3509620)

Nagma Enterprises (BID ID -3505569)

binta construction (BID ID -3511877)

Shetty Construction Co (BID ID -3505340)

BAJAJ CONSTRUCTION (BID ID -3506027)

Shivam Enterprises (BID ID -3511622)